Members Can Post Anonymously On This Site
Authentic 1948 film of pilot Captain Mantell crash while chasing a UFO
-
Similar Topics
-
By NASA
6 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater)
This enhanced-color mosaic was taken on Sept. 27 by the Perseverance rover while climbing the western wall of Jezero Crater. Many of the landmarks visited by the rover during its 3½-year exploration of Mars can be seen.NASA/JPL-Caltech/ASU/MSSS On its way up the side of Jezero Crater, the agency’s latest Red Planet off-roader peers all the way back to its landing site and scopes the path ahead.
NASA’s Perseverance Mars rover is negotiating a steeply sloping route up Jezero Crater’s western wall with the aim of cresting the rim in early December. During the climb, the rover snapped not only a sweeping view of Jezero Crater’s interior, but also imagery of the tracks it left after some wheel slippage along the way.
An annotated version of the mosaic captured by Perseverance highlights nearly 50 labeled points of interest across Jezero Crater, including the rover’s landing site. The 44 images that make up the mosaic were taken Sept. 27.NASA/JPL-Caltech/ASU/MSSS Stitched together from 44 frames acquired on Sept. 27, the 1,282nd Martian day of Perseverance’s mission, the image mosaic features many landmarks and Martian firsts that have made the rover’s 3½-year exploration of Jezero so memorable, including the rover’s landing site, the spot where it first found sedimentary rocks, the location of the first sample depot on another planet, and the final airfield for NASA’s Ingenuity Mars Helicopter. The rover captured the view near a location the team calls “Faraway Rock,” at about the halfway point in its climb up the crater wall.
“The image not only shows our past and present, but also shows the biggest challenge to getting where we want to be in the future,” said Perseverance’s deputy project manager, Rick Welch of NASA’s Jet Propulsion Laboratory in Southern California. “If you look at the right side of the mosaic, you begin to get an idea what we’re dealing with. Mars didn’t want to make it easy for anyone to get to the top of this ridge.”
Visible on the right side of the mosaic is a slope of about 20 degrees. While Perseverance has climbed 20-degree inclines before (both NASA’s Curiosity and Opportunity rovers had crested hills at least 10 degrees steeper), this is the first time it’s traveled that steep a grade on such a slippery surface.
This animated orbital-map view shows the route NASA’s Perseverance Mars rover has taken since its February 2021 landing at Jezero Crater to July 2024, when it took its “Cheyava Falls” sample. As of October 2024, the rover has driven over 30 kilometers (18.65 miles), and has collected 24 samples of rock and regolith as well as one air sample. NASA/JPL-Caltech Soft, Fluffy
During much of the climb, the rover has been driving over loosely packed dust and sand with a thin, brittle crust. On several days, Perseverance covered only about 50% of the distance it would have on a less slippery surface, and on one occasion, it covered just 20% of the planned route.
“Mars rovers have driven over steeper terrain, and they’ve driven over more slippery terrain, but this is the first time one had to handle both — and on this scale,” said JPL’s Camden Miller, who was a rover planner, or “driver,” for Curiosity and now serves the same role on the Perseverance mission. “For every two steps forward Perseverance takes, we were taking at least one step back. The rover planners saw this was trending toward a long, hard slog, so we got together to think up some options.”
On Oct. 3, they sent commands for Perseverance to test strategies to reduce slippage. First, they had it drive backward up the slope (testing on Earth has shown that under certain conditions the rover’s “rocker-bogie” suspension system maintains better traction during backward driving). Then they tried cross-slope driving (switchbacking) and driving closer to the northern edge of “Summerland Trail,” the name the mission has given to the rover’s route up the crater rim.
To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
NASA’s Perseverance drives first backward then forward as it negotiates some slippery terrain found along a route up to the rim of Jezero Crater on Oct. 15. The Mars rover used one of its navigation cameras to capture the 31 images that make up this short video.NASA/JPL-Caltech Data from those efforts showed that while all three approaches enhanced traction, sticking close to the slope’s northern edge proved the most beneficial. The rover planners believe the presence of larger rocks closer to the surface made the difference.
“That’s the plan right now, but we may have to change things up the road,” said Miller. “No Mars rover mission has tried to climb up a mountain this big this fast. The science team wants to get to the top of the crater rim as soon as possible because of the scientific opportunities up there. It’s up to us rover planners to figure out a way to get them there.”
Tube Status
In a few weeks, Perseverance is expected to crest the crater rim at a location the science team calls “Lookout Hill.” From there, it will drive about another quarter-mile (450 meters) to “Witch Hazel Hill.” Orbital data shows that Witch Hazel Hill contains light-toned, layered bedrock. The team is looking forward to comparing this new site to “Bright Angel,” the area where Perseverance recently discovered and sampled the “Cheyava Falls” rock.
Tracks shown in this image indicate the slipperiness of the terrain Perseverance has encountered during its climb up the rim of Jezero Crater. The image was taken by one of rover’s navigation cameras on Oct. 11. NASA/JPL-Caltech The rover landed on Mars carrying 43 tubes for collecting samples from the Martian surface. So far, Perseverance has sealed and cached 24 samples of rock and regolith (broken rock and dust), plus one atmospheric sample and three witness tubes. Early in the mission’s development, NASA set the requirement for the rover to be capable of caching at least 31 samples of rock, regolith, and witness tubes over the course of Perseverance’s mission at Jezero. The project added 12 tubes, bringing the total to 43. The extras were included in anticipation of the challenging conditions found at Mars that could result in some tubes not functioning as designed.
NASA decidedto retire two of the spare empty tubes because accessing them would pose a risk to the rover’s small internal robotic sample-handling arm needed for the task: A wire harness connected to the arm could catch on a fastener on the rover’s frame when reaching for the two empty sample tubes.
With those spares now retired, Perseverance currently has 11 empty tubes for sampling rock and two empty witness tubes.
More About Perseverance
A key objective of Perseverance’s mission on Mars is astrobiology, including caching samples that may contain signs of ancient microbial life. The rover will characterize the planet’s geology and past climate, to help pave the way for human exploration of the Red Planet and as the first mission to collect and cache Martian rock and regolith.
NASA’s Mars Sample Return Program, in cooperation with ESA (European Space Agency), is designed to send spacecraft to Mars to collect these sealed samples from the surface and return them to Earth for in-depth analysis.
The Mars 2020 Perseverance mission is part of NASA’s Moon to Mars exploration approach, which includes Artemis missions to the Moon that will help prepare for human exploration of the Red Planet.
NASA’s Jet Propulsion Laboratory, which is managed for the agency by Caltech, built and manages operations of the Perseverance rover.
For more about Perseverance:
https://science.nasa.gov/mission/mars-2020-perseverance
News Media Contacts
Karen Fox / Molly Wasser
NASA Headquarters, Washington
202-358-1600
karen.c.fox@nasa.gov / molly.l.wasser@nasa.gov
DC Agle
Jet Propulsion Laboratory, Pasadena, Calif.
818-393-9011
agle@jpl.nasa.gov
2024-144
Share
Details
Last Updated Oct 28, 2024 Related Terms
Perseverance (Rover) Jet Propulsion Laboratory Mars Explore More
6 min read NASA Successfully Integrates Coronagraph for Roman Space Telescope
Article 2 hours ago 4 min read Could Life Exist Below Mars Ice? NASA Study Proposes Possibilities
Article 2 weeks ago 4 min read New Team to Assess NASA’s Mars Sample Return Architecture Proposals
NASA announced Wednesday a new strategy review team will assess potential architecture adjustments for the…
Article 2 weeks ago Keep Exploring Discover Related Topics
Missions
Humans in Space
Climate Change
Solar System
View the full article
-
By Space Force
This week the Department of Defense kicks off a three-year pilot program meant to reimburse service members up to $1,500 for travel-related expenses incurred for a temporary child care provider following a permanent change of station move.
View the full article
-
By USH
Reports of alien abductions first became widespread during the 1960s and 70s. Alleged abductees frequently described undergoing experimental procedures performed by extraterrestrial beings. Some even claimed that these aliens had inserted unknown objects into their bodies.
In many cases, these so-called "alien implants" are metallic and have been reported to emit radio frequency waves. Often, they are found attached to nerve endings within the body.
One of the most prominent figures in this field of research was Dr. Roger Leir, who passed away on March 14, 2014. Along with his surgical team, Dr. Leir performed 17 surgeries on individuals who claimed to have been abducted by aliens, removing 13 distinct objects suspected to be alien implants.
These objects were subjected to scientific analysis by prestigious laboratories, including Los Alamos National Labs, New Mexico Tech, and the University of California at San Diego. The findings have been puzzling, with some comparisons made to meteorite samples, and isotopic ratios in some tests suggesting materials not of Earthly origin.
One such case is that of Terry Lovelace, a former Air Force medic, who kept a disturbing secret for 40 years. In 2012, a routine x-ray revealed a small square object about the size of a fingernail which was buried deep in Terry's right leg the doctor had never see anything like it.
Then Terry suddenly remembered the terrifying experience he had tried to forget - an event during a camping trip at Devil's Den State Park that he had never spoken of, knowing no one would believe him without proof. Yet the evidence had always been there: a strange metal object embedded in his leg, something that was not man-made.
In 1977, Terry and a friend had an extraordinary encounter at Devil's Den State Park, where they witnessed a massive triangular craft. This experience resulted in missing time and unexplained injuries. Years later, Terry was faced with a difficult choice: reveal his story of alien contact or remain silent. His decision led him into conflict with powerful forces and uncovered a conspiracy that extended beyond our world.
While some remain skeptical, believing these implants are man-made and part of a secretive human agenda, Dr. Leir’s work, along with Terry Lovelace's experience at Devil’s Den and the mysterious object found in his leg, suggests that 'alien' implants may not be mere fiction.
View the full article
-
By NASA
Learn Home Co-creating authentic STEM… Community Partners Overview Learning Resources Science Activation Teams SME Map Opportunities More Science Stories Science Activation Highlights Citizen Science 2 min read
Co-creating authentic STEM learning experiences with Latino communities
Led by Arizona State University, the NASA Science Activation Program’s “Engaging Hispanic Communities in Authentic NASA Science” project advances NASA’s vision for science, technology, engineering, and mathematics (STEM) education by co-creating learning experiences with Latino communities in six locations in California, Arizona, New Mexico, and Texas. Partners at each site – including educational organizations, community groups, and subject matter experts – are collaborating to offer culturally sustaining learning experiences that reflect the people, priorities, and assets of each community.
In the San Francisco Bay area, the University of California Berkeley’s Lawrence Hall of Science is working with Bay Area Community Resources to offer hands-on Earth and space activities at hundreds of out-of-school-time programs. In San Diego, the Fleet Science Center and the San Ysidro STEM Committee are planning an annual STEM festival. In the Phoenix/Mesa metro area, Arizona State University and RAIL Community Development Corporation are working with community members and local artists to create STEAM (STEM + art) experiences that will be embedded in Hispanic neighborhoods. In Albuquerque, Explora and Horizons Albuquerque are hosting a teen summit to co-create a new futures-oriented exhibition for the science center. The Brownsville Children’s Museum in Texas is working with a variety of partners to engage families in STEM learning at community events across the area. Finally, in Houston, the Children’s Museum of Houston and Community Family Centers are offering STEM summer camp experiences in underserved Hispanic neighborhoods.
These activities have spanned across Spring and Summer 2024 and engaged over 10,000 learners in authentic STEM learning experiences. Looking ahead to the future, team members will continue to deepen their relationships among organizations and broaden participation across their local communities. The six sites also convene regularly as a community of practice, sharing insights, strategies, and practices. Learnings from the project and professional resources will also be shared widely across the STEM engagement and education professionals.
The Engaging Hispanic Communities in Authentic NASA Science project is supported by NASA under cooperative agreement award number 80NSSC22M0122 and is part of NASA’s Science Activation Portfolio. Learn more about how Science Activation connects NASA science experts, real content, and experiences with community leaders to do science in ways that activate minds and promote deeper understanding of our world and beyond: https://science.nasa.gov/learn
Family doing a hands-on activity at a science center. NISE Network/Guillermo Delgado Share
Details
Last Updated Aug 30, 2024 Editor NASA Science Editorial Team Related Terms
Community Partners Opportunities For Educators to Get Involved Science Activation Explore More
3 min read Eclipse Soundscapes AudioMoth Donations Will Study Nature at Night
Article
2 days ago
2 min read Solar Eclipse Data Story Helps the Public Visualize the April 2024 Total Eclipse
Article
2 weeks ago
3 min read New TEMPO Cosmic Data Story Makes Air Quality Data Publicly Available
Article
2 weeks ago
Keep Exploring Discover More Topics From NASA
James Webb Space Telescope
Webb is the premier observatory of the next decade, serving thousands of astronomers worldwide. It studies every phase in the…
Perseverance Rover
This rover and its aerial sidekick were assigned to study the geology of Mars and seek signs of ancient microbial…
Parker Solar Probe
On a mission to “touch the Sun,” NASA’s Parker Solar Probe became the first spacecraft to fly through the corona…
Juno
NASA’s Juno spacecraft entered orbit around Jupiter in 2016, the first explorer to peer below the planet’s dense clouds to…
View the full article
-
By NASA
Earlier this month, nine small businesses received 2023 NASA Small Business Innovation Research (SBIR) Ignite Phase II awards to further develop technologies that may be used in the agency’s missions and in the commercial space industry.
The SBIR Ignite Phase II awardees, who will receive up to $850,000 to fund their projects, are developing technology capabilities in the detection of wildfires, support for water management in agriculture, in-space debris detection, mineral mining from lunar regolith, in-space production, and more. These capabilities are vital to supporting deep space exploration, low Earth orbit missions, and preserving life on our home planet for the benefit of all. The businesses initially were selected for Phase I awards in 2023 and provided six months and up to $150,000 to prove their concepts before competing for Phase II.
“We want to support innovators across the aerospace industry because their technologies have the potential to make a big impact in the commercial market. A rich and diverse marketplace creates more opportunity for us all. These Phase II awards illuminate a clear path for a unique range of technologies that we believe will positively influence the lives of all Americans.”
Jason L. Kessler
NASA SBIR/STTR Program Executive
The SBIR Ignite pilot initiative supports product-driven small businesses, startups, and entrepreneurs that have commercialization at the forefront of their innovation strategies and processes but that are not targeting NASA as a primary customer. The pilot initiative provides funding and other support to mitigate risk in technologies that have strong commercial potential by offering lower barriers to entry, a streamlined review and selection process, and accelerated technology development and awards as compared to the NASA SBIR program’s main solicitation. It also focuses on helping make participating companies more appealing to investors, customers, and partners, while fulfilling SBIR’s mission of increasing commercialization of innovations derived from federal research and development.
While the agency’s main Small Business Innovation Research and Small Business Technology Transfer solicitations focus on technologies with potential for infusion in both NASA missions and commercialization in the marketplace, the SBIR Ignite opportunity is less prescriptive and focuses on topics that are relevant to emerging commercial markets in aerospace, such as accelerating in-space production applications in low Earth orbit.
The awarded companies are:
Astral Forge, LLC, Palo Alto, California Astrobotic Technology Inc., Pittsburgh Benchmark Space Systems, Burlington, Vermont Brayton Energy, LLC, Hampton, New Hampshire Channel-Logistics LLC dba Space-Eyes, Miami GeoVisual Analytics, Westminster, Colorado Space Lab Technologies, LLC, Boulder, Colorado Space Tango, Lexington, Kentucky VerdeGo Aero, De Leon Springs, Florida
The third year of NASA Small Business Innovation Research (SBIR) Ignite is underway, as the 2024 SBIR Ignite Phase I solicitation closed on July 30, 2024. Those selections are expected to be announced Fall 2024.
NASA’s Small Business Innovation Research and Small Business Technology Transfer program is part of NASA’s Space Technology Mission Directorate and is managed by NASA’s Ames Research Center in Silicon Valley.
View the full article
-
-
Check out these Videos
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.