Jump to content

Recommended Posts

  • Publishers
Posted
Streaks of white light cover a blue Earth, and a green and red aurora rises from the horizon. The exterior of the space station is visible in the top third of the image.
City lights streak across Earth and an aurora is visible on the horizon as the International Space Station passes over Lake Michigan.
NASA

For more than 24 years, NASA has supported a continuous U.S. human presence aboard the International Space Station, advancing scientific knowledge and making research breakthroughs not possible on Earth for the benefit of humanity. The space station is a springboard to NASA’s next great leaps in exploration, including future missions to the Moon under Artemis, and ultimately, human exploration of Mars.

Read more about the groundbreaking work conducted in 2024 aboard the station:

Robot performs remote simulated surgery

On long-duration missions, crew members may need surgical procedures, whether simple stitches or an emergency appendectomy. A small robot successfully performed simulated surgical procedures on the space station in early February 2024 for the Robotic Surgery Tech Demo, using two “hands” to grasp and cut rubber bands simulating tissue. Researchers compare the procedures conducted aboard the station and on Earth to evaluate the effects of microgravity and communication delays between space and ground.

O’Hara is wearing a gray hooded sweatshirt and smiling at the camera, as she holds the miniature robot with both hands. The robot is narrow, about the size of an adult’s forearm, with a gray handle that has up and down arrow buttons and two bent “arms” on its end. One of the arms has a metal spatula and the other a set of clippers.
NASA astronaut Loral O’Hara holds the Robotic Surgery Tech Demo hardware on the International Space Station.
NASA

3D metal print in space

On May 30,2024, the ESA (European Space Agency) Metal 3D Printer investigation created a small stainless steel s-curve, the first metal 3D print in space. Crew members on future missions could print metal parts for equipment maintenance, eliminating the need to pack spare parts and tools at launch. This technology also has the potential to improve additive manufacturing on Earth.

Epps is wearing a long-sleeved black top and pants, a black headband, goggles, and blue latex gloves and has a tablet attached by Velcro to her pants. In her right hand she holds a small disk with six 3D printed posts of different shapes and lengths protruding from it.
NASA astronaut Jeanette Epps prints samples for Metal 3D Printer on the International Space Station.
NASA

Here’s looking at you, Earth

The space station orbits roughly 250 miles above and passes over 90 percent of Earth’s population, providing a unique perspective for photographing the planet. Astronauts have taken more than 5.3 million images of Earth to monitor the planet’s changing landscape. The Expedition 71 crew took over 630,000 images, well above the average of roughly 105,000 for a single mission. This year, images included the April solar eclipse and auroras produced as the Sun’s 11-year activity cycle peaks. Others supported response to over 14 disaster events including hurricanes. In addition, 80,000 images were geolocated using machine learning, improving public search capabilities.

Milton is a large white spiral and a long cloud trail extending across this image. A portion of the space station is visible in the upper left corner, with blue ocean on Earth in the upper right.
This astronaut photo from the International Space Station shows Hurricane Milton, a category 4 storm in the Gulf of Mexico, nearing the coast of Florida in October.
NASA

Miles of flawless fibers

From mid-February to mid-March of 2024, the Flawless Space Fibers-1 system produced more than seven miles of optical fiber in space. One draw of more than a half mile of fiber surpassed the prior record of 82 feet for the longest fiber manufactured in space, demonstrating that commercial lengths of fiber can be produced in orbit. Fibers produced in microgravity can be superior to those produced in Earth’s gravity. These fibers are made from ZBLAN, a glass alloy with the potential to provide more than 10 times the transmission capacity of traditional silica-based fibers.

O’Hara, wearing a dark blue sleeveless t-shirt, smiles at the camera. Her right hand is touching the front of a large silver box built into a wall, with lights above it and a clear panel that reveals part of a circular sample holder that resembles an old film reel. There is a panel of switches below her hand and several large cameras on the wall behind her.
NASA astronaut Loral O’Hara conducting Flawless Space Fibers operations in the Microgravity Science Glovebox inside the International Space Station.
NASA

Tell-tale heart

In May 2024, BFF-Cardiac successfully bioprinted a three-dimensional human heart tissue sample using the Redwire BioFabrication Facility. Tissues bioprinted in the microgravity of the space station hold their shape without the use of artificial scaffolds. These bioprinted human heart tissues eventually could be used to create personalized patches for tissue damaged by events such as heart attacks. The tissue sample is undergoing further testing on Earth.

On the left, Dominick, wearing a black short-sleeved polo shirt and a headlamp, smiles at the camera. His arms are in the plastic sleeves of a portable glovebag the size of a large suitcase. On the right, a cylindrical glass flask holds a red liquid. In the bottom of the flask is a palm-sized white cellular structure under a spotlight.
At left, NASA astronaut Matthew Dominick works on the BFF-Cardiac investigation aboard the International Space Station. At right, cardiac tissue is 3D bioprinted for the investigation.
NASA

Station-tested radiation technology flown on Artemis I

The Orion spacecraft carried 5,600 passive and 34 active radiation detectors on its Artemis I uncrewed mission around the Moon in November 2022. Some of these devices previously were tested on the space station: HERA (Hybrid Electronic Radiation Assessor), which detects radiation events such as solar flares; the ESA (European Space Agency) Active Dosimeters, a wearable device collecting real-time data on individual radiation doses; and the AstroRad Vest, a garment to protect radiation-sensitive organs and tissues. In 2024, researchers released evaluation of data collected in 2022 by these tools that indicate the Orion spacecraft can protect astronauts on lunar missions from potentially hazardous radiation. The orbiting laboratory remains a valuable platform for testing technology for missions beyond Earth’s orbit.

The vest, closed by two buckle straps, is dark blue with a gray stripe from the bottom up to the shoulder, and small patches of the American and Israeli flags and StemRad and Lockheed Martin logos. The seven windows of the cupola are visible behind it and, through them, Earth below.
The AstroRad Vest, a radiation protection garment, floats in the International Space Station’s cupola.
NASA

Record participation in Fifth Robo-Pro Challenge

A record 661 teams and 2,788 applicants from thirteen countries, regions, and organizations participated in the fifth Kibo Robo-Pro Challenge, which wrapped its final round in September. This educational program from JAXA (Japan Aerospace Exploration Agency) has students solve various problems by programming free-flying Astrobee robots aboard the space station. Participants gain hands-on experience with space robot technology and software programming and interact with others from around the world.

The carry-on suitcase-sized, cube-shaped robot, with blue and black sides and a white middle, moves up and across the image from right to left. Behind it is a round white station hatch and, to either side of it, walls covered with cords, equipment, and rolls of tape.
An Astrobee robot moves through the space station for the Robo-Pro Challenge.
NASA

Melissa Gaskill
International Space Station Research Communications Team|
Johnson Space Center

View the full article

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By NASA
      NASA Expert Answers Your Questions About Asteroid 2024 YR4
    • By NASA
      Gateway’s HALO (Habitation and Logistics Outpost) in a cleanroom at Thales Alenia Space in Turin, Italy. After final installations are complete, it will be packaged and transported to the United States for final outfitting before being integrated with Gateway’s Power and Propulsion Element and launched to lunar orbit. Thales Alenia Space Through the Artemis campaign, NASA will send astronauts on missions to and around the Moon. The agency and its international partners report progress continues on Gateway, the first space station that will permanently orbit the Moon, after visiting the Thales Alenia Space facility in Turin, Italy, where initial fabrication for one of two Gateway habitation modules is nearing completion.
      Leaders from NASA, ESA (European Space Agency), and the Italian Space Agency, as well as industry representatives from Northrop Grumman and Thales Alenia Space, were in Turin to assess Gateway’s HALO (Habitation and Logistics Outpost) module before its primary structure is shipped from Italy to Northrop Grumman’s Gilbert, Arizona site in March. Following final outfitting and verification testing, the module will be integrated with the Power and Propulsion Element at NASA’s Kennedy Space Center in Florida.
      “Building and testing hardware for Gateway is truly an international collaboration,” said Jon Olansen, manager, Gateway Program, at NASA’s Johnson Space Center in Houston. “We’re excited to celebrate this major flight hardware milestone, and this is just the beginning – there’s impressive and important progress taking shape with our partners around the globe, united by our shared desire to expand human exploration of our solar system while advancing scientific discovery.”
      Gateway’s HALO (Habitation and Logistics Outpost) in a cleanroom at Thales Alenia Space in Turin, Italy. After final installations are complete, it will be packaged and transported to the United States for final outfitting before being integrated with Gateway’s Power and Propulsion Element and launched to lunar orbit.Thales Alenia Space To ensure all flight hardware is ready to support Artemis IV — the first crewed mission to Gateway – NASA is targeting the launch of HALO and the Power and Propulsion Element no later than December 2027. These integrated modules will launch aboard a SpaceX Falcon Heavy rocket and spend about a year traveling uncrewed to lunar orbit, while providing scientific data on solar and deep space radiation during transit.
      Launching atop HALO will be ESA’s Lunar Link communication system, which will provide high-speed communication between the Moon and Gateway. The system is undergoing testing at another Thales Alenia Space facility in Cannes, France.
      Once in lunar orbit, Gateway will continue scientific observations while awaiting the arrival of Artemis IV astronauts aboard an Orion spacecraft which will deliver and dock Gateway’s second pressurized habitable module, the ESA-led Lunar I-Hab. Thales Alenia Space, ESA’s primary contractor for the Lunar I-Hab and Lunar View refueling module, has begun production of the Lunar I-Hab, and design of Lunar View in Turin.
      Teams from NASA and ESA (European Space Agency), including NASA astronaut Stan Love (far right) and ESA astronaut Luca Parmitano (far left) help conduct human factors testing inside a mockup of Gateway’s Lunar I-Hab module.Thales Alenia Space Northrop Grumman and its subcontractor, Thales Alenia Space, completed welding of HALO in 2024, and the module successfully progressed through pressure and stress tests to ensure its suitability for the harsh environment of deep space.
      Maxar Space Systems is assembling the Power and Propulsion Element, which will make Gateway the most powerful solar electric propulsion spacecraft ever flown. Major progress in 2024 included installation of Xenon and chemical propulsion fuel tanks, and qualification of the largest roll-out solar arrays ever built. NASA and its partners will complete propulsion element assembly, and acceptance and verification testing of next-generation electric propulsion thrusters this year.
      The main bus of Gateway’s Power and Propulsion Element undergoes assembly and installations at Maxar Space Systems in Palo Alto, California.Maxar Space Systems SpaceX will provide both the Starship human landing system that will land astronauts on the lunar surface during NASA’s Artemis III mission and ferry astronauts from Gateway to the lunar South Pole region during Artemis IV, as well as provide logistics spacecraft to support crewed missions.
      NASA also has selected Blue Origin to develop Blue Moon, the human landing system for Artemis V, as well as logistics spacecraft for future Artemis missions. Having two distinct lunar landing designs provides flexibility and supports a regular cadence of Moon landings in preparation for future missions to Mars.
      CSA (Canadian Space Agency) is developing Canadarm3, an advanced robotics system, and JAXA (Japan Aerospace Exploration Agency) is designing and testing Lunar I-Hab’s vital life support systems, batteries, and a resupply and logistics vehicle called HTV-XG.
      NASA’s newest Gateway partner, the Mohammad Bin Rashid Space Centre (MBRSC) of the United Arab Emirates, kicked off early design for the Gateway Crew and Science Airlock that will be delivered on Artemis VI. The selection of Thales Alenia Space as its airlock prime contractor was announced by MBRSC on Feb. 4.
      Development continues to advance on three radiation-focused initial science investigations aboard Gateway. These payloads will help scientists better understand unpredictable space weather from the Sun and galactic cosmic rays that will affect astronauts and equipment during Artemis missions to the Moon and beyond.
      The Gateway lunar space station is a multi-purpose platform that offers capabilities for long-term exploration in deep space in support of NASA’s Artemis campaign and Moon to Mars objectives. Gateway will feature docking ports for a variety of visiting spacecraft, as well as space for crew to live, work, and prepare for lunar surface missions. As a testbed for future journeys to Mars, continuous investigations aboard Gateway will occur with and without crew to better understand the long-term effects of deep space radiation on vehicle systems and the human body as well as test and operate next generation spacecraft systems that will be necessary to send humans to Mars.
      Learn More About Gateway Facebook logo @NASAGateway @NASA_Gateway Instagram logo @nasaartemis Share
      Details
      Last Updated Feb 21, 2025 ContactLaura RochonLocationJohnson Space Center Related Terms
      Artemis Artemis 4 Earth's Moon Exploration Systems Development Mission Directorate Gateway Space Station Humans in Space Johnson Space Center Explore More
      2 min read Lunar Space Station Module Will Journey to US ahead of NASA’s Artemis IV Moon Mission
      A key element of the Gateway lunar space station has entered the cleanroom for final…
      Article 1 week ago 2 min read Advanced Modeling Enhances Gateway’s Lunar Dust Defense
      Ahead of more frequent and intense contact with dust during Artemis missions, NASA is developing…
      Article 1 month ago 2 min read Gateway Tops Off
      Gateway’s Power and Propulsion Element is now equipped with its xenon and liquid fuel tanks.
      Article 3 months ago Keep Exploring Discover More Topics From NASA
      Humans In Space
      Orion Spacecraft
      Human Landing System
      Extravehicular Activity and Human Surface Mobility
      View the full article
    • By NASA
      Live Video from the International Space Station (Official NASA Stream)
    • By NASA
      Live High-Definition Views from the International Space Station (Official NASA Stream)
    • By NASA
      Explore This SectionEarth Home Earth Observer Home Editor’s Corner Feature Articles Meeting Summaries NewsScience in the News Calendars In Memoriam MoreArchives 3 min read
      In Memoriam: Jeff Dozier [1944–2024]
      Jeff Dozier [1944–2024]Photo credit: Dozier’s family obituary Jeff Dozier, an environmental scientist, snow hydrologist, researcher, academic – and former Earth Observing System Project Scientist – died on November 17, 2024. Jeff’s research focused on snow hydrology and biogeochemistry in mountain environments and addressed the role of stored and melting snow in the hydrologic cycle as well as the economic and social impact on water resources. In these efforts, he embraced remote sensing with satellites to measure snow properties and energy balance. He was a Project Scientist with the Earth Observing System (EOS) Data and Information System, contributing to the design and management of very large information systems that would impact spatial modeling and environmental informatics.
      Jeff served as the second EOS Project Scientist from 1990–1992. During that time, he worked with the NASA science community to – in his own words – “accomplish the goals of EOS, the most important of which is to develop the capability to predict or assess plausible environmental changes – both natural and human-induced – that will occur in the future. Meeting this challenge for the next decade to century requires the integration of knowledge from the traditional disciplines and information from many different sources into a coherent view of the Earth system. EOS is the largest project in the history of NASA and arguably the most important national and international scientific mission of the next two decades.”
      Jeff’s work alongside Michael Matson, was featured in a 2019 NASA Earth Science news article: “NASA Tracks Wildfires From Above to Aid Firefighters Below.” While working at NOAA’s National Environmental Satellite, Data, and Information Service building in Camp Springs, MD, the pair detected methane fires in the Persian Gulf using the Advanced Very High Resolution Radiometer (AVHRR) instrument on the NOAA-6 satellite – marking the first time that such a small fire had been seen from space. Jeff went on to develop a mathematical method to distinguish small fires from other sources of heat, which become the foundation for nearly all subsequent satellite fire-detection algorithms. 
      At the time of his death, Jeff was Principal Investigator of a NASA-funded project with the objective of testing whether data from the Earth Surface Mineral Dust Source Investigation (EMIT) mission could be used to help refine the estimate for the snowpack melting rate. In the 2024 Earth Science news article, “NASA’s EMIT Will Explore Diverse Science Questions on Extended Mission,” Jeff indicated that EMIT’s ability to ‘see’ well into the infrared (IR) spectrum of light is key to his group’s efforts because ice is “pretty absorptive at near-IR and shortwave-IR wavelengths.” The results from this research will help inform water management decisions in states, such as California, where meltwater makes up the majority of the agricultural water supply.
      Jeff earned a Bachelor’s of Science degree from California State University, Hayward (now California State University, East Bay) and a Master’s of Science degree and Ph.D. from the University of Michigan. He spent his career teaching at the University of California, Santa Barbara (UCSB), where he was named the founding Dean of the Bren School of Environmental Science and Management at UCSB in 1994. As the Dean, he recruited renowned faculty and developed one of the top environmental programs in the country. After his role as Dean, Jeff returned as a professor at Bren, educating the next generation of Earth scientists.
      Jeff Dozier [1944–2024]Photo credit: Dozier’s family obituaryView the full article
  • Check out these Videos

×
×
  • Create New...