Members Can Post Anonymously On This Site
CMSSF visits Pituffik SB at the 'Top of the World'
-
Similar Topics
-
By NASA
With two months to go before flight, the Apollo 13 prime crew of James Lovell, Thomas Mattingly, Fred Haise, and backups John Young, John Swigert, and Charles Duke continued to train for the 10-day mission planned to land in the Fra Mauro highlands region of the Moon. Engineers continued to prepare the Saturn V rocket and spacecraft at the launch pad for the April 11, 1970, liftoff and completed the Flight Readiness Test of the vehicle. All six astronauts spent many hours in flight simulators training while the Moon walkers practiced landing the Lunar Module and rehearsed their planned Moon walks. The crew for the next Moon landing mission, Apollo 14, participated in a geology field trip as part of their training for the flight then planned for October 1970. Meanwhile, NASA released Apollo 12 lunar samples to scientists and the Apollo 12 crew set off on a Presidential world goodwill tour.
At NASA’s Kennedy Space Center in Florida, engineers completed the Flight Readiness Test of the Apollo 13 Saturn V on Feb. 26. The test ensured that all systems are flight ready and compatible with ground support equipment, and the astronauts simulated portions of the countdown and powered flight. Successful completion of the readiness test cleared the way for a countdown dress rehearsal at the end of March.
John Young prepares for a flight aboard the Lunar Landing Training Vehicle.NASA John Young after a training flight aboard the landing trainer. NASA Fred Haise prepares for a flight at the Lunar Landing Research Facility. NASA One of the greatest challenges astronauts faced during a lunar mission entailed completing a safe landing on the lunar surface. In addition to time spent in simulators, Apollo mission commanders and their backups trained for the final few hundred feet of the descent using the Lunar Landing Training Vehicle at Ellington Air Force Base near the Manned Spacecraft Center, now NASA’s Johnson Space Center, in Houston. Bell Aerosystems of Buffalo, New York, built the trainer for NASA to simulate the flying characteristics of the Lunar Module. Lovell and Young completed several flights in February 1970. Due to scheduling constraints with the trainer, lunar module pilots trained for their role in the landing using the Lunar Landing Research Facility at NASA’s Langley Research Center in Hampton, Virginia. Haise and Duke completed training sessions at the Langley facility in February.
Charles Duke practices Lunar Module egress during a KC-135 parabolic flight. NASA Charles Duke rehearses unstowing equipment from the Lunar Module during a KC-135 parabolic flight. NASA The astronauts trained for moonwalks with parabolic flights aboard NASA’s KC-135 aircraft that simulated the low lunar gravity, practicing their ladder descent to the surface. On the ground, they rehearsed the moonwalks, setting up the American flag and the large S-band communications antenna, and collecting lunar samples. Engineers improved their spacesuits to make the expected longer spacewalks more comfortable for the crew members by installing eight-ounce bags of water inside the helmets for hydration.
James Lovell, left, and Fred Haise practice setting up science equipment, the American flag, and the S-band antenna.NASA Lovell, left, and Haise practice collecting rock samples. NASA John Young, left, and Charles Duke train to collect rock samples. NASA Fred Haise, left, and James Lovell practice lowering the Apollo Lunar Surface Experiment Package from the Lunar Module.NASA Lovell, left, and Haise practice setting up the experiments. NASA Lovell, left, and Haise practice drilling for the Heat Flow Experiment. NASA During their 35 hours on the Moon’s surface, Lovell and Haise planned to conduct two four-hour spacewalks to set up the Apollo Lunar Surface Experiment Package (ALSEP), a suite of four investigations designed to collect data about the lunar environment after the astronauts’ departure, and to conduct geologic explorations of the landing site. The four experiments included the:
Charged Particle Lunar Environment Experiment designed to measure the flexes of charged particles Cold Cathode Gauge Experiment designed to measure the pressure of the lunar atmosphere Heat Flow Experiment designed to make thermal measurements of the lunar subsurface Passive Seismic Experiment designed to measure any moonquakes, either naturally occurring or caused by artificial means As an additional investigation, the astronauts planned to deploy and retrieve the Solar Wind Composition experiment, a sheet of aluminum foil to collect particles from the solar wind for analysis by scientists back on Earth after about 20 hours of exposure on the lunar surface.
Apollo 14 astronauts Eugene Cernan, left, Joe Engle, Edgar Mitchell, and Alan Shepard with geologist Richard Jahns in the Pinacates Mountains of northern Mexico. NASA Shepard, left, Engle, Mitchell, and Cernan training with the Modular Equipment Transporter, accompanied by geologist Jahns. NASA With one lunar mission just two months away, NASA continued preparations for the following flight, Apollo 14, then scheduled for October 1970 with a landing targeted for the Littrow region of the Moon, an area scientists believed to be of volcanic origin. Apollo 14 astronauts Alan Shepard, Stuart Roosa, and Edgar Mitchell and their backups Eugene Cernan, Ronald Evans, and Joe Engle learned spacecraft systems in the simulators. Accompanied by a team of geologists led by Richard Jahns, Shepard, Mitchell, Cernan, and Engle participated in a geology expedition to the Pinacate Mountain Range in northern Mexico Feb. 14-18, 1970. The astronauts practiced using the Modular Equipment Transporter, a two-wheeled conveyance to transport tools and samples on the lunar surface.
Mail out of the Apollo 12 lunar samples. Apollo 12 astronauts Charles Conrad, left, Richard Gordon, and Alan Bean ride in a motorcade in Lima, Peru.NASA On Feb. 13, 1970, NASA began releasing Apollo 12 lunar samples to 139 U.S. and 54 international scientists in 16 countries, a total of 28.6 pounds of material. On Feb. 16, Apollo 12 astronauts Charles Conrad, Richard Gordon, and Alan Bean, accompanied by their wives and NASA and State Department officials, departed Houston’s Ellington Air Force Base for their 38-day Bullseye Presidential Goodwill World Tour. They first traveled to Latin America, making stops in Venezuela, Peru, Chile, and Panama before continuing on to Europe, Africa, and Asia.
The groundbreaking science and discoveries made during Apollo missions has pushed NASA to explore the Moon more than ever before through the Artemis program. Apollo astronauts set up mirror arrays, or “retroreflectors,” on the Moon to accurately reflect laser light beamed at them from Earth with minimal scattering or diffusion. Retroreflectors are mirrors that reflect the incoming light back in the same incoming direction. Calculating the time required for the beams to bounce back allowed scientists to precisely measure the Moon’s shape and distance from Earth, both of which are directly affected by Earth’s gravitational pull. More than 50 years later, on the cusp of NASA’s crewed Artemis missions to the Moon, lunar research still leverages data from those Apollo-era retroreflectors.
Explore More
10 min read 55 Years Ago: Apollo 13, Preparations for the Third Moon Landing
Article 2 months ago 23 min read 55 Years Ago: Apollo 12 Makes a Pinpoint Landing on the Moon
Article 3 months ago 9 min read 60 Years Ago: The First Flight of the Lunar Landing Research Vehicle
Article 4 months ago View the full article
-
By NASA
Modeling properties of thunderstorm discharges
Researchers report detailed physical properties of different types of corona discharges, including single- and multi-pulse blue discharges linked to powerful but short-lived electrical bursts near the tops of clouds. These details provide a reference for further investigation into the physical mechanisms behind these discharges and their role in the initiation of lightning, an important problem in lightning physics.
An ESA (European Space Agency) instrument used to study thunderstorms, Atmosphere-Space Interactions Monitor (ASIM) provides insights into their role in Earth’s atmosphere and climate, including mechanisms behind the creation of lightning. Understanding how thunderstorms and lightning disturb the upper atmosphere could improve atmospheric models along with climate and weather predictions. These high-altitude discharges also affect aircraft and spacecraft safety.
An artist’s impression of a blue jet as observed from the International Space Station.Mount Visual/University of Bergen/DTU Space Evaluating effects of climate change on oceans
Researchers conclude that the space station’s ECOSTRESS instrument yields highly accurate sea surface temperature data. Given the instrument’s global coverage and high spatial resolution, these data have potential use in studies of biological and physical oceanography to evaluate regional and local effects of climate change.
ECOSTRESS resolves oceanographic features not detectable in imagery from NOAA’s Visible Infrared Imaging Radiometer Suite satellite, and has open-ocean coverage, unlike Landsat. Satellites are a fundamental tool to measure sea surface temperatures, which are rising across all oceans due to atmospheric warming induced by climate change.
The ECOSTRESS instrument, the white box in the center, is visible on the outside of the station.NASA Describing a gamma ray burst
Researchers report detailed observations and analysis of emissions from an exceptionally bright gamma ray burst (GRB), 210619B, detected by the station’s ASIM and other satellite and ground-based instruments. These observations could be useful in determining various properties of GRBs and how they change during different phases.
Believed to be generated by the collapse of massive stars, GRBs are the brightest, most explosive transient electromagnetic events in the universe. ASIM can observe thunderstorm discharges difficult to observe from the ground. It has a mode where a detected event triggers observation and onboard storage of data.
A view of ASIM mounted on the outside of the space station. NASAView the full article
-
By Space Force
The U.S. Space Force made a strong showing at the Daytona 500 to recruit the next generation of service members on February 16, 2025.
View the full article
-
By NASA
Measuring water loss from space
This study showed that the International Space Station’s ECOSTRESS instrument estimates of evapotranspiration (transfer of water to the atmosphere from Earth’s surface and plants) are comparable to ground-based reference values. This finding suggests space measurements could provide guidance for improved water management on large scales.
Worsening droughts due to climate change require better water management. Evapotranspiration is a critical part of the hydrologic cycle, but data are lacking on local water conditions and demands. California’s Eastern Municipal Water District uses the ground-based California Irrigation Management Information System to track evapotranspiration, but it has limited spatial coverage and consistency. Space-based estimates could be better and more consistent.
The ECOSTRESS instrument, the white box in the center, is visible on the outside of the station.NASA
Four-legged robotic retrievers
Space station crew members successfully located and retrieved an object in a simulated Mars environment using a remotely controlled four-legged robot, Bert. Legged robots could provide the ability to explore and survey different extraterrestrial surfaces on future missions.
On uneven lunar and planetary surfaces, robots with legs could explore areas inaccessible to wheeled rovers. Surface Avatar, an investigation from ESA (European Space Agency), evaluated remote control of multiple robots in space, providing information on how human operators respond to physical feedback (such as feeling a bump when a robot arm makes contact) and identifying challenges for orbit-to-ground remote operation of robots. The German Aerospace Center is developing Bert.
ESA astronaut Samantha Cristoforetti practices maneuvers for the Surface Avatar investigation.NASA
Technology supports atmospheric studies
Researchers found that the Compact Thermal Imager (CTI) on the space station produced scientifically useful imagery of atmospheric phenomena, including gravity waves, clouds, and volcanic plumes. This technology could change current practices and instrument design for remote sensing of Earth from space.
The CTI is mounted on hardware for Robotic Refueling Mission 3, which tested technology for the robotic transfer and storage of cryogenic fluids in microgravity. The station’s orbit provides near-global coverage and CTI has reduced size, energy use, and cost. Its images can measure fires, ice sheets, glaciers, and snow surface temperatures on the ground and the transfer of water from soil and plants into the atmosphere.
NASA astronaut Anne McClain and CSA astronaut David Saint-Jacques installing the RRM3 hardware.NASAView the full article
-
By NASA
Ambiguity.
That’s the word that comes to mind when documentary photographers start each day at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.
PACE mission photographer Denny Henry and lead documentary photographer Desiree Stover pose for selfies in the clean room.Credits: NASA “You walk in and think one thing is happening,” said OCI’s lead documentary photographer Desiree Stover. “But in an instant things change – maybe goes wrong –- and you need to be ready to capture it.”
From build to testing to launch, one figure is always present in the background capturing the story of each Goddard mission – the documentary photographer.
In honor of #WorldPhotoDay, follow along as two of our documentarians share what it’s like to capture the story of Goddard’s latest mission build PACE.
PACE or Plankton, Aerosol, Cloud, ocean Ecosystem, is set to launch in early 2024. Its goal is to see ocean and atmosphere features in unparalleled detail. By measuring the intensity of the color that reflects from Earth’s ocean surface, PACE will capture fine details about tiny plant-like organisms and algae that live in the ocean, called phytoplankton, that are the basis of the marine food web and generate half of Earth’s oxygen.
Crafting the Story
For Stover and her partner Denny Henry, PACE’s lead mission photographer, the story starts with the smallest details.
“I think one of the first things I photographed was the outside of a circuit port box. It was literally an empty metal box,” said Henry, who started photographing PACE in 2020, right before the pandemic. “It might be small, but it’s part of a system that’s going to do big things.”
Mark Walter, David Kim, Melyane Ortiz-acosta, and Ariel Obaldo discuss plans for testing the PACE flight Solar Array Panels.Credits: NASA’s Goddard Space Flight Center/Denny Henry A typical day for these photographers usually starts with a morning meeting, assignments and getting ready. By the end of the day, the original plan has likely been changed, multiple times.
“Some days we might shoot eight photos, other days it might be hundreds or more,” Stover said.
PACE, or Plankton, Aerosol, Cloud, ocean Ecosystem, is set to launch in early 2024. Its goal is to see ocean and atmosphere features in unparalleled detail.Credits: NASA Images captured during shoots are used for a variety of things, especially technical components of the mission. This includes documenting builds, spotting mistakes and testing.
Stover got her start at Goddard by photographing NASA’s James Webb Space Telescope before switching to capturing imagery of Goddard’s small instruments, including PACE’s Ocean Color Instrument, or OCI. This advanced sensor will enable continuous measurement of light throughout the ultraviolet to shortwave infrared spectrum to better understand Earth’s ocean and atmosphere.
She says she’s still in awe that her teammates trust her “eye.”
“One of the most fascinating things about working here is that we have a specific job,” she said. “And even though engineers can pick up a camera and take photos, they don’t. They know we’re the experts at it. They trust our eyes to tell and capture the story.”
Henry said one of the most memorable days he’s documented so far was watching the PACE team integrate the SPEXone instrument into the spacecraft.
“All the partners were there as I photographed. It was a big deal,” he said. “I captured every bolt all the way to the mounting. It’s important to get these details. Six months from now someone who wasn’t there might want to see what was done in what order.”
Henry said that capturing images is only part of the job. For every hour of shooting, there’s also an hour spent processing and working with partners to ensure things were documented correctly.
Playing Detective
While telling the story is important, Stover says that part of the job is speaking up, especially when you notice something wrong.
During one assignment documenting vibration testing, Stover noticed that OCI’s Earth shade looked different.
“We took the bagging off and could see tape peeling off the radiator panels, possibly loose wires in certain places,” she said. “When I saw this, I thought back to what it was like when we shot this the first time.”
Physical Science Technician Kristen Washington performs a contamination inspection of the OCI Flight Fold Flat Mirror optic.Credits: Desiree Stover, NASA Goddard It’s common for the photographers to shoot things twice to examine how things might change when in testing. When Stover saw the tape, she got to work ensuring her hunch was right.
She sent a series of images to the thermal team lead letting him know what she found. Plans were already underway to change the design.
The unexpected
Stover and Henry agree that documenting missions has come with some interesting experiences.
Both had to undergo fall protection harness training in the event they had to climb around one of Goddard’s cleanrooms, something that happened to Stover during one assignment.
“Once I was up in Building 29’s high bay. Like up at the very top in the crane rafters shooting. I never thought I was afraid of heights until that moment,” she said. “But I focused on the image and what task I was accomplishing and completed the assignment without issue.”
Henry said adjusting to Covid-19 required a lot of flexibility, especially with sudden changes.
“This is not a job you can do from home,” he said. “After a few months, we adapted.”
Radio Frequency testing of the PACE Earth Coverage Antenna in the Electromagnetic Anechoic Chamber at Goddard Space Flight Center.Credits: NASA’s Goddard Space Flight Center/Denny Henry Henry said that many times mission teams will find that engineering drawings won’t match up with what was actually built. With the pandemic restrictions, PACE heavily relied on his images to note how things changed and why issues occurred.
As PACE heads toward big milestones in the next year, both Stover and Henry are excited to see their work come together, including the day of launch.
They both agreed that photographing the teams involved in each aspect of PACE’s build is especially rewarding as they help create mementos that go along with their mission’s story.
By: Sara Blumberg
NASA’s Goddard Space Flight Center, Greenbelt, Md.
View the full article
-
-
Check out these Videos
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.