Members Can Post Anonymously On This Site
Europa Clipper: NASA’s Mission to Jupiter's Ocean Moon (Mission Trailer)
-
Similar Topics
-
By NASA
In November 1969, Apollo 12 astronauts Commander Charles “Pete” Conrad, Command Module Pilot (CMP) Richard F. Gordon, and Lunar Module Pilot (LMP) Alan L. Bean completed the second crewed lunar landing mission. Conrad and Bean achieved a pinpoint landing in the Ocean of Storms within walking distance of the Surveyor 3 spacecraft that landed there in April 1967. While Gordon conducted science from lunar orbit, Conrad and Bean completed two spacewalks on the lunar surface, deploying science instruments, collecting geology samples, and inspecting Surveyor including retrieving several of it parts for study back on Earth. Preparations continued for the next two missions, Apollo 13 and 14, tentatively planned for March and July 1970, respectively.
Apollo 12
Left: The crew of Apollo 12 – Charles “Pete” Conrad, left, Richard F. Gordon, and Alan L. Bean. Right: The Apollo 12 crew patch.
Left: The Apollo 12 crew of Charles “Pete” Conrad, center, Richard F. Gordon, and Alan L. Bean, facing them, at the traditional prelaunch breakfast, with their mascot “Irving” behind Conrad. Right: Conrad leads Gordon and Bean onto the astronaut van for the ride to Launch Pad 39A.
Left: Apollo 12, moments before liftoff into rainy skies. Middle: Liftoff of Apollo 12. Right: Lightning strikes Launch Pad 39A shortly after the Apollo 12 launch.
Lift off came precisely at 11:22 a.m. EST on Nov. 14, 1969, with the Saturn V launching Apollo 12 into a dark and rainy sky. The flight proceeded normally for the first 36 seconds, with Conrad even commenting that, “It’s a lovely liftoff. It’s not bad at all.” Then everything went haywire. With Apollo 12 at about 6,600 feet altitude and flying through clouds, observers on the ground noted lightning striking the launch pad. Onboard the spacecraft, the astronauts saw a bright flash, followed by many of the spacecraft’s electronics going offline, causing the three power-generating fuel cells to also go offline.
A second event 52 seconds into the flight caused the spacecraft guidance navigation system to go offline. In the Mission Control Center (MCC) at the Manned Spacecraft Center (MSC), now NASA’s Johnson Space Center in Houston, a young engineer named John W. Aaron monitored the spacecraft’s systems through the two incidents. He correctly deduced that the spacecraft’s Signal Conditioning Equipment (SCE) must have suffered some unknown upset and went offline. The simple solution to restoring it to normal function involved moving a seldom-used switch from its Normal to its Auxiliary position. Bean recalled the switch’s location on his panel, carried out the requested action, and restored the spacecraft’s systems. Aaron’s quick action saved the launch from two lightning strikes. Once Conrad understood the cause of the excitement, he radioed to Houston, “I think we need to do a little more all-weather testing.”
Left: View of the Earth shortly after Trans Lunar Injection, with one of the Spacecraft Lunar Module (LM) Adapter panels silhouetted against the clouds. Middle: During Transposition and Docking, the LM Intrepid still attached to the S-IVB third stage. Right: The receding Earth during the translunar coast.
The rest of the ascent continued without incident and Apollo 12 settled into orbit around the Earth. After verifying that all systems continued functioning properly following the lightning strikes, the astronauts received the call, “The good word is you’re Go for TLI,” the Trans Lunar Injection, the second burn of the third stage engine to send them on their way to the Moon. In his characteristic fashion, Conrad replied, “Hoop-ee-doo! We’re ready! We didn’t expect anything else!” The next major event, the Transposition and Docking (T&D) maneuver, began about 25 minutes later.
After the separation of the Command and Service Module (CSM) Yankee Clipper from the S-IVB stage, Gordon turned it around and slowly guided it to a docking with the LM Intrepid still attached to the top of the S-IVB. Conrad commented during the maneuver, “I got an awful pretty looking Intrepid sitting out the window here, gang. We’ll go get her.” After the docking, Gordon backed away from the third stage, extracting the LM in the process, and completing the T&D maneuver. For the next three days, the astronauts continued their journey toward the Moon. Along the way, they inspected Intrepid to verify it came to no harm from the lightning strikes, conducted one midcourse maneuver to ensure their accurate arrival near the Moon, and provided two TV broadcasts showing views of Earth and their spacecraft.
Left: Image from lunar orbit of the Fra Mauro highlands, the proposed landing site for Apollo 13 (inside white circle). Middle: The Lunar Module Intrepid as seen from the Command Module Yankee Clipper shortly after undocking. Right: Yankee Clipper as seen from Intrepid.
The Apollo 12 astronauts awoke for their fourth mission day to find themselves within the Moon’s gravitational sphere of influence. Apollo 12 sailed behind the Moon, losing contact with Earth. Thirteen minutes later, the astronauts fired the Service Propulsion System (SPS) engine for the Lunar Orbit Insertion burn, placing them into an elliptical orbit around the Moon.
Left: Still from 16 mm film looking out Alan L. Bean’s window at about 3,500 feet during the descent, showing the location of Surveyor Crater, the Apollo 12 landing site. Right: Illustration of the Apollo 12 landing site and the two surface traverses.
During the third lunar orbit, the crew fired the SPS engine again to circularize their orbit. The next day, Conrad and Bean donned their spacesuits and reactivated the LM for the separation and landing, extending Intrepid’s landing legs. After undocking and while behind the Moon, Conrad and Bean fired the LM’s Descent Propulsion System engine to lower Intrepid’s orbit. Exactly half a revolution later, Intrepid began the burn to drop it from orbit all the way to the landing in the Ocean of Storms. With Bean providing updates from the guidance computer, Conrad skillfully piloted Intrepid to a smooth landing just northwest of Surveyor Crater, and as they learned later, only 538 feet from Surveyor 3. Without much fanfare, Conrad and Bean completed the postlanding checklist, although Bean allowed himself a little exuberant “Good landing, Pete! Outstanding, man! Beautiful!” Conrad radioed to Mission Control, “Okay, we’re in hot shape, Houston. We’re in real good shape!” They had a chance to look out the windows, with Bean exclaiming, “Holy cran, it’s beautiful out here!” Conrad replied, “It sure is; it’s something else,” later adding, “Man! I can’t wait to get outside!”
Left: Charles “Pete” Conrad on the Lunar Module ladder about to descend to the surface. Middle: Alan L. Bean takes his first steps on the Moon. Right: Conrad working on the central station of the Apollo Lunar Surface Experiment Package, with its various instruments deployed around it.
Conrad and Bean donned their Portable Life Support System (PLSS) backpacks that provided oxygen and communications while on the surface and donned their helmets and gloves. They depressurized the LM, opened the hatch, and Conrad backed out onto the porch, slowly climbing down the ladder. Halfway down, he pulled a lanyard that deployed a color TV camera on the side of the LM’s descent stage, providing a view of him on the LM ladder. After he jumped from the bottom rung onto the footpad, Conrad exclaimed, “Whoopie! Man, that may have been a small one for Neil, but that’s a long one for me,” in reference to Armstrong’s famous words as he took humanity’s first step on the Moon and Conrad’s shorter stature. As he stepped off the pad, he remarked, “Oooh is that soft and queasy.” After taking a few tentative steps, Conrad informed everyone that he could see Surveyor 3 sitting inside the crater. He collected the contingency sample – in case they had to leave quickly due to an emergency, geologists would have one small sample from the Ocean of Storms.
Bean joined Conrad on the surface, both acclimating rapidly to working in one-sixth g. Conrad set up the S-band antenna for communications with Earth, but while setting up the TV camera, Bean accidentally pointed it at the Sun and damaged the vidicon tube, ending the live TV transmission from the Moon. Bean deployed the Solar Wind Collector (SWC), a Swiss experiment that collected particles from the solar wind, and then he and Conrad set up the American flag. They began the primary task of the first spacewalk – setting up the various instruments of the Apollo Lunar Surface Experiment Package (ALSEP). Conrad and Bean carried them to their deployment location about 430 feet to the northwest of Intrepid. They explored the area around the ALSEP site, visiting craters of interest and collecting rock and soil samples before heading back toward Intrepid. They remarked on several occasions how the lunar dust clung to their suits and equipment, and as Conrad quipped, “We’re going to be a couple of dirty boogers.” First Bean then Conrad climbed up the ladder and once inside Intrepid they closed the hatch and repressurized the cabin. Their first spacewalk lasted 3 hours and 56 minutes. They set up hammocks in Intrepid and went to sleep.
Left and middle: Charles “Pete” Conrad and Alan L. Bean with the Surveyor 3 spacecraft, with their Lunar Module (LM) Intrepid visible in the background. Right: View from inside the LM through Bean’s window following the second spacewalk.
After a short night’s rest, Conrad and Bean prepared for their second spacewalk. As before, first Conrad and then Bean descended the ladder to the surface. Conrad walked to the ALSEP to inspect one of the instruments, the seismometer they deployed during the first spacewalk picking up his footsteps. Both then headed west from Intrepid, where Conrad rolled two rocks down into a crater, the vibrations captured by the seismometer. They collected several documented samples, often preceded with expressions like “Oooooh!” and “That’s a beauty!” and dug a trench to expose subsurface material, collecting a sample from about eight inches deep.
They set off toward the main objective of this spacewalk – Surveyor 3, resting on the inner slope of 600-foot-wide Surveyor Crater. Entering the crater from the south rim, they walked counterclockwise while descending down the slope until they reached the robotic spacecraft. After taking “tourist” pictures with Surveyor, the two photographed the craft from all angles, noting that the trenches left by its scoop and the marks from its footpads when it bounced after landing looked as fresh as when Surveyor photographed them in 1967. Using cutters, Conrad removed the craft’s camera, scoop, and other parts for return to Earth, where engineers and scientists examined them for the effects of 31 months in the harsh lunar environment. The work at Surveyor completed, the two returned to Intrepid. Bean retrieved the SWC experiment, overcoming difficulties in rolling it back up. Compared with a short 77-minute exposure during Apollo 11, this SWC collected samples of the solar wind for nearly 19 hours. With everything packed up, Bean followed by Conrad headed up the ladder. After closing the hatch, they repressurized Intrepid, ending the 3-hour 49-minute excursion.
The Apollo 12 landing site photographed by the Lunar Reconnaissance Orbiter in 2011, the inset showing the Lunar Module Intrepid’s descent stage.
Left: A still from 16 mm film recorded aboard Yankee Clipper of Intrepid’s approach just prior to docking. Middle: The Moon shortly after Trans Earth Injection. Right: A receding Moon during the trans Earth coast.
After returning inside Intrepid, Conrad and Bean took photographs out the windows, showing the signs of their visit – numerous footprints, the American flag, the S-band antenna, and in the distance, the ALSEP station. As Gordon in Yankee Clipper flew overhead on his 30th lunar revolution, Intrepid’s Ascent Stage engine ignited, and Conrad and Bean lifted off from the Moon after 31 hours and 31 minutes on the surface. Conrad exclaimed, “Liftoff! And away we go!” with Bean adding, “Boy, did it fire!” Intrepid and Yankee Clipper executed a series of maneuvers that led to their docking about three and a half hours after liftoff from the Moon. Their independent flights had lasted 37 hours and 42 minutes. The three astronauts opened the hatches between the two spacecraft and began transfers from Intrepid into Yankee Clipper, including the lunar samples, cameras, and film. Gordon transferred some unneeded items to be jettisoned in Intrepid. The transfers completed, they closed the hatches between the spacecraft and jettisoned the LM. To calibrate the seismometer left on the Moon, controllers sent a command to Intrepid to fire its thrusters to drop it out of orbit and send it crashing onto the surface. The seismometer recorded signals for nearly one hour after the impact.
Left: Recording from the Apollo 12 seismometer of the intentional crash of Intrepid’s ascent stage. Right: LRO image of the impact area and debris field of Intrepid’s ascent stage, east of the Fra Mauro B crater.
The primary activity for their remaining time around the Moon consisted of photographing potential landing sites for future Apollo missions, such as the Fra Mauro highlands and the Descartes region. On their 45th revolution, they went around to the Moon’s back side for the last time and they fired the SPS for the Trans Earth Injection burn. Apollo 12 left lunar orbit after 3 days 17 hours and 2 minutes. Conrad radioed to Mission Control, “Hello, Houston. Apollo 12’s en route home.”
During the three-day return trip to Earth, the astronauts conducted a midcourse maneuver to refine their trajectory, answered questions from geologists and other scientists, and held a press conference at the end of which they held up a homemade sign to the camera that read, “Yankee Clipper sailed with Intrepid to the Sea of Storms, Moon, November 14, 1969,” signed by all three crew members. With the Sun and the Earth nearly aligned, the astronauts could only see a very thin crescent of their home planet, prompting Conrad to comment, “Houston, we just got our first glimpse of you this morning, and there’s not very much of you out there.”
Left: The Moon continues to shrink in size as Apollo 12 heads for home. Middle: The Earth appearing as a thin crescent. Right: The Apollo 12 astronauts observed a total solar eclipse as they passed into Earth’s shadow shortly before reentry.
Left: The Apollo 12 Command Module Yankee Clipper descends on its three main parachutes seconds before splashdown. Middle: A recovery helicopter hovers over Yankee Clipper in the Stable II, or apex down, position, seconds after splashdown. Right: Image taken by a recovery diver of the decontamination officer assisting Alan L. Bean out of Yankee Clipper, with Richard F. Gordon, left, and Charles “Pete” Conrad already aboard the life raft.
Shortly before reentry, orbital mechanics had a show in store for the astronauts – their trajectory passed through the Earth’s shadow, treating them to a total solar eclipse. Gordon radioed Mission Control, “We’re getting a spectacular view at eclipse,” and Bean added that it was a “fantastic sight.” The excitement of the eclipse over, the astronauts prepared the cabin for reentry. The CM separated from the Service Module and rotated to point its heatshield into the direction of flight. At 400,000 feet, Yankee Clipper now travelling at 24,625 miles per hour encountered the first tendrils of Earth’s atmosphere. About four minutes of radio blackout followed as ionized gases created by the heat of reentry surrounded the spacecraft. As Apollo 12 came out of the blackout, the prime recovery ship U.S.S. Hornet established radar contact with the spacecraft at a distance of 119 miles. At about 24,000 feet, the spacecraft jettisoned its apex cover, then deployed its two drogue parachutes to slow and stabilize the capsule. At 10,000 feet, the three main orange and white parachutes deployed, with Conrad reporting, “Three gorgeous beautiful chutes.” Precisely 244 hours and 36 minutes after lifting off from Florida, Apollo 12 splashed down in the Pacific Ocean less than four miles from Hornet, bringing the second lunar landing mission to a successful conclusion.
Left: Apollo 12 astronauts Richard F. Gordon, left, Alan L. Bean, and Charles “Pete” Conrad aboard the recovery helicopter. Middle: Conrad, front, Gordon, and Bean walk from the helicopter to the Mobile Quarantine Facility (MQF). Right: Admiral John S. McCain addresses the Apollo 12 astronauts in the MQF.
The capsule assumed the apex down Stable 2 position in the water, but in less than five minutes three self-inflating balloons righted the spacecraft into the Stable 1 upright orientation. Five minutes later, a helicopter dropped the first three recovery team swimmers into the water, tasked with securing a flotation collar and rafts to the spacecraft. Decontamination officer Ernest “Ernie” L. Jahncke next dropped into the water and once the crew opened the hatch, he handed them fresh flight suits and respirators. A few minutes later, the crew reopened the hatch, and first Conrad, then Gordon, and finally Bean climbed aboard a life raft where Jahncke used a disinfectant solution to decontaminate the astronauts and the spacecraft. The recovery helicopter lowered a Billy Pugh net to haul the astronauts up from the raft, first Gordon, then Bean, and finally Conrad. Aboard the helicopter, NASA flight surgeon Dr. Clarence A. Jernigan gave each astronaut a brief physical examination during the short flight back to Hornet, declaring all three healthy.
After it landed on Hornet’s deck, sailors lowered the helicopter to the hangar deck, where Conrad, Gordon, and Bean, followed by Dr. Jernigan, walked the few steps to the Mobile Quarantine Facility (MQF) where NASA engineer Brock R. “Randy” Stone awaited them. He sealed the door of the MQF exactly one hour after splashdown. The five men spent the next five days together in the MQF until they arrived at the Lunar Receiving Laboratory (LRL) at MSC. The astronauts took congratulatory phone calls from President Richard M. Nixon, who field-promoted all three from U.S. Navy Commanders to Captains, and from NASA Administrator Thomas O. Paine. After the astronauts talked briefly with their families, Commander-in-Chief of Pacific Naval Forces Admiral John S. McCain formally welcomed them back to Earth, followed by brief speeches by Rear Admiral Donald C. Davis, Commander of Recovery Forces, and Capt. Carl J. Seiberlich, Hornet’s skipper.
Left: Apollo 12 Command Module Yankee Clipper in the water with U.S.S. Hornet approaching as a rescue helicopter circles. Middle: Recovery team members lift Yankee Clipper out of the water. Right: Sailors haul Yankee Clipper aboard the Hornet.
Within an hour after the astronauts arrived on board Hornet, the recovery team hauled Yankee Clipper out of the water and towed it below to the hangar deck next to the MQF. As Hornet set sail for Pearl Harbor, arriving there four days later, workers attached a hermetically sealed plastic tunnel between the MQF and Yankee Clipper, allowing Stone to leave the MQF and open the hatch to the capsule without breaking the biological barrier. He retrieved the two rock boxes containing the lunar samples, the bags containing the Surveyor parts, film cassettes, and mission logs from the capsule. He brought them to the MQF where he sealed them in plastic bags and transferred them to the outside through a transfer lock that included a decontamination wash.
Outside the MQF, NASA engineers placed these items into transport containers and loaded them aboard two separate aircraft. The first aircraft carrying one rock box and a second package containing film departed Hornet within nine hours of the recovery, flying to Pago Pago, American Samoa. From there the two containers were placed aboard a cargo aircraft and flown directly to Ellington Air Force Base (AFB) near MSC in Houston, arriving there late in the afternoon of Nov. 25. A second aircraft departed Hornet 14 hours after the first and included the second rock box, additional film as well as the astronaut medical samples. It flew to Pago Pago where workers transferred the containers to another cargo plane that flew them to Houston. Less than 48 hours after splashdown, scientists in the LRL were examining the lunar samples and processing the film.
Left: Technicians carry the first box of Apollo 12 lunar samples from the cargo plane after its arrival at Ellington Air Force Base in Houston. Middle: Technicians log in the first set of Apollo 12 lunar samples and film at the Lunar Receiving Laboratory’s (LRL) loading dock. Right: A technician weighs the first Apollo 12 Sample Return Container in the LRL.
Left: Technicians place the first Apollo 12 Sample Return Container (SRC) inside a glovebox at the Lunar Receiving Laboratory. Middle: The first Apollo 12 SRC inside a glovebox. Right: Scientists get the first glimpse of the Moon rocks inside the first SRC.
Left: Apollo 12 astronauts Richard F. Gordon, second from left, Alan L. Bean and Charles “Pete” Conrad prepare their mission report inside the MQF. Middle: Workers at Pearl Harbor in Honolulu offload the Mobile Quarantine Facility (MQF) from Hornet with the Apollo 12 crew inside. Right: Workers at Ellington Air Force Base in Houston offload the MQF with the astronauts inside.
Meanwhile, in the Pacific Ocean, Hornet sailed for Pearl Harbor, Hawaii, with the astronauts inside the MQF to maintain the strict back-contamination protocols. They also celebrated Thanksgiving on Nov. 27. Dr. Jernigan conducted regular medical examinations of the astronauts, who showed no ill effects from their ten-day spaceflight or any signs of infection by any lunar microorganisms. The crew members availed themselves of one amenity aboard the MQF that was a novelty at the time – a microwave oven for meal preparation.
On Nov. 28, Hornet arrived at Pearl Harbor. Workers lifted the MQF with the astronauts inside onto a flat-bed trailer. After a brief welcoming ceremony including traditional Hawaiian flower leis, ukulele music, and hula dancers, they drove the MQF to nearby Hickam AFB, where Air Force personnel loaded it onto a cargo aircraft. After an eight-hour flight, the aircraft arrived at Ellington on the morning of Nov. 29, where the MQF was offloaded in front of a waiting crowd of well-wishers including MSC Director Robert R. Gilruth and Apollo 11 astronaut Neil A. Armstrong. The astronauts’ wives and children were on hand to welcome them home to Houston. Workers placed the MQF on a flat-bed truck and drove it to the LRL. Less than two hours after landing in Houston the astronauts arrived inside the Crew Reception Area (CRA) where they spent the next 11 days. During their time in quarantine, they completed many of the postflight debriefs and examined the lunar rocks as well as the parts of Surveyor 3 such as its camera that they returned from the Ocean of Storms.
Left: Robert R. Gilruth, director of the Manned Spacecraft Center, now NASA’s Johnson Space Center in Houston, welcomes the Apollo 12 astronauts home. Middle: The Apollo 12 astronauts’ wives Barbara Gordon, left, Jane Conrad, and Sue Bean and their children welcome their husbands home. Right: Apollo 11 astronaut Neil A. Armstrong greets the Apollo 12 crew upon their return to Ellington.
Left: Workers drive the Apollo 12 astronauts inside the Mobile Quarantine Facility (MQF) from Ellington Air Force Base to the Manned Spacecraft Center (MSC), now NASA’s Johnson Space Center in Houston. Middle: The MQF approaches MSC. Right: The MQF docked the MSC’s Building 37, the Lunar Receiving Laboratory.
Left: Charles “Pete” Conrad examines some of the Moon rocks he and Alan L. Bean returned from the Moon. Middle: Conrad and Richard F. Gordon place the rocks samples back in the collection bags. Right: Conrad examines the camera from Surveyor 3 that he and Bean returned from the Moon.
Left: The Apollo 12 Command Module Yankee Clipper arrives at the Lunar Receiving Laboratory (LRL) at the Manned Spacecraft Center, now NASA’s Johnson Space Center in Houston. Middle: Yankee Clipper temporarily parked outside the LRL before workers roll it inside. Right: In the LRL, Richard F. Gordon writes on Yankee Clipper that served as his home for 10 days.
After the astronauts departed Hornet in Pearl Harbor, workers lifted Yankee Clipper from the carrier’s flight deck to the dock and drove it to Hickam AFB where technicians safed the vehicle by draining its toxic fuels. To preserve back-contamination protocols, Yankee Clipper’s hatch remained sealed. On Dec. 1, workers loaded Yankee Clipper onto a cargo aircraft at Hickam AFB. It arrived at Ellington AFB the next day and workers trucked it to the LRL, then towed it inside the spacecraft room of the CRA. The Apollo 12 astronauts signed their names on the capsule below the same words they held up during their inflight news conference – “Yankee Clipper Sailed with Intrepid to The Ocean of Storms, Moon, November 14, 1969.”
Left: The Apollo 12 Command Module Yankee Clipper on display at the Virginia Air and Space Center in Hampton. Middle: A technician examines the Surveyor 3 camera returned by Apollo 12. Right: The Surveyor 3 camera on display at the Smithsonian Institution’s National Air and Space Museum in Washington, D.C.
Visitors to the Virginia Air and Space Center in Hampton can view the Apollo 12 CM Yankee Clipper on display. Surveyor’s camera is on display at the Smithsonian Institution’s National Air and Space Museum in Washington, D.C.
Apollo 13
Left: Apollo 13 astronaut James A. Lovell preparing to test his spacesuit in a vacuum chamber in the Space Environment Simulation Laboratory at the Manned Spacecraft Center, now NASA’s Johnson Space Center in Houston. Middle: Workers at NASA’s Kennedy Space Center in Florida prepare the Apollo 13 Command and Service Module. Right: Lovell during the geology field trip to Kilbourne Hills, New Mexico.
The next Moon landing mission, Apollo 13, planned to launch on March 12, 1970, and visit the Fra Mauro highlands region of the Moon. With the mission’s increased emphasis on science, geology training for the Apollo 13 prime crew of Commander James A. Lovell, CMP Thomas K. “Ken” Mattingly, and LMP Fred W. Haise, and their backups John W. Young, Jack L. Swigert, and Charles M. Duke, took on greater importance. Lovell, Haise, Young, and Duke, accompanied by several geologists, traveled to Kilbourne Hole, New Mexico, for a one-day geology field trip on Nov. 11. The area’s volcanic origins served as appropriate training for their planned landing site, then believed to be a result of volcanic activity. The astronauts practiced deploying their ALSEP set of instruments, including during suited tests in a vacuum chamber in MSC’s Space Environment Simulation Laboratory. At KSC, workers in the Manned Spacecraft Operations Building (MSOB) continued preparing both the CSM and the LM for Apollo 13 prior to stacking with the Saturn V rocket in December.
Apollo 14
Left: The Apollo 14 Command and Service Modules arrive at NASA’s Kennedy Space Center (KSC) for preflight processing. Middle: The Apollo 14 Lunar Module (LM) descent stage arrives at KSC. Right: The Apollo 14 LM ascent stage arrives at KSC.
Spacecraft components for Apollo 14, then planned for launch around July 1970, arrived at KSC in November 1969. The CM and SM arrived on Nov. 19 and workers in the MSOB mated the two components five days later. The two stages of the LM arrived in the MSOB on Nov. 24.
With special thanks to Robert B. Fish for his expertise on U.S.S. Hornet recovery operations.
To be continued …
News from around the world in November 1969:
November 10 – Sesame Street premieres on PBS.
November 12 – Five Americans and one New Zealander became the first women to visit the South Pole.
November 15 – Wendy’s Hamburgers opens in Columbus, Ohio.
November 20 – Brazilian soccer star Pelé scores his 1,000th goal.
November 22 – Isolation of a single gene announced by scientists at Harvard University.
Explore More
12 min read 40 Years Ago: STS-51A – “The Ace Repo Company”
Article 6 days ago 1 min read Oral History with Jon A. McBride, 1943 – 2024
Article 7 days ago 9 min read 30 Years Ago: STS-66, the ATLAS-3 Mission to Study the Earth’s Atmosphere
Article 1 week ago View the full article
-
By NASA
5 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater)
NASA’s EMIT collected this hyperspectral image of the Amazon River in northern Brazil on June 30 as part of an effort to map global ecosystem biodiversity. The instrument was originally tasked with mapping minerals over deserts; its data is now being used in research on a diverse range of topics. NASA/JPL-Caltech The imaging spectrometer measures the colors of light reflected from Earth’s surface to study fields such as agriculture, hydrology, and climate science.
Observing our planet from the International Space Station since July 2022, NASA’s EMIT (Earth Surface Mineral Dust Source Investigation) mission is beginning its next act.
At first the imaging spectrometer was solely aimed at mapping minerals over Earth’s desert regions to help determine the cooling and heating effects that dust can have on regional and global climate. The instrument soon added another skill: pinpointing greenhouse gas emission sources, including landfills and fossil fuel infrastructure.
Following a mission extension this year, EMIT is now collecting data from regions beyond deserts, addressing topics as varied as agriculture, hydrology, and climate science.
Imaging spectrometers like EMIT detect the light reflected from Earth, and they separate visible and infrared light into hundreds of wavelength bands — colors, essentially. Scientists use patterns of reflection and absorption at different wavelengths to determine the composition of what the instrument is observing. The approach echoes Isaac Newton’s prism experiments in 1672, in which the physicist discovered that visible light is composed of a rainbow of colors.
Perched on the International Space Station, NASA’s EMIT can differentiate between types of vegetation to help researchers understand the distribution and traits of plant communities. The instrument collected this data over the mid-Atlantic U.S. on April 23.NASA/JPL-Caltech “Breakthroughs in optics, physics, and chemistry led to where we are today with this incredible instrument, providing data to help address pressing questions on our planet,” said Dana Chadwick, EMIT’s applications lead at NASA’s Jet Propulsion Laboratory in Southern California.
New Science Projects
In its extended mission, EMIT’s data will be the focus of 16 new projects under NASA’s Research Opportunities in Space and Earth Science (ROSES) program, which funds science investigations at universities, research institutions, and NASA.
For example, the U.S. Geological Survey (USGS) and the U.S. Department of Agriculture’s (USDA) Agricultural Research Service are exploring how EMIT can assess climate-smart agricultural practices. Those practices — winter cover crops and conservation tillage — involve protecting cropland during non-growing seasons with either living plants or dead plant matter to prevent erosion and manage nitrogen.
Imaging spectrometers are capable of gathering data on the distribution and characteristics of plants and plant matter, based on the patterns of light they reflect. The information can help agricultural agencies incentivize farmers to use sustainable practices and potentially help farmers manage their fields.
“We’re adding more accuracy and reducing error on the measurements we are supplying to end users,” said Jyoti Jennewein, an Agricultural Research Service research physical scientist based in Fort Collins, Colorado, and a project co-lead.
The USGS-USDA project is also informing analytical approaches for NASA’s future Surface Biology and Geology-Visible Shortwave Infrared mission. The satellite will cover Earth’s land and coasts more frequently than EMIT, with finer spatial resolution.
Looking at Snowmelt
Another new project will test whether EMIT data can help refine estimates of snowpack melting rates. Such an improvement could inform water management in states like California, where meltwater makes up the majority of the agricultural water supply.
Imaging spectrometers like EMIT measure the albedo of snow — the percentage of solar radiation it’s reflecting. What isn’t reflected is absorbed, so the observations indicate how much energy snow is taking in, which in turn helps with estimates of snow melt rates. The instruments also discern what’s affecting albedo: snow-grain size, dust or soot contamination, or both.
For this work, EMIT’s ability to measure beyond visible light is key. Ice is “pretty absorptive at near-infrared and the shortwave infrared wavelengths,” said Jeff Dozier, a University of California, Santa Barbara professor emeritus and the project’s principal investigator.
Other ROSES-funded projects focus on wildflower blooming, phytoplankton and carbon dynamics in inland waters, ecosystem biodiversity, and functional traits of forests.
Dust Impacts
Researchers with EMIT will continue to study the climate effects of dust. When lofted into the air by windstorms, darker, iron-filled dust absorbs the Sun’s heat and warms the surrounding air, while lighter-colored, clay-rich particles do the opposite. Scientists have been uncertain whether airborne dust has overall cooling or warming effects on the planet. Before EMIT, they could only assume the color of particles in a region.
The EMIT mission is “giving us lab-quality results, everywhere we need to know,” said Natalie Mahowald, the mission’s deputy principal investigator and an Earth system scientist at Cornell University in Ithaca, New York. Feeding the data into Earth system computer models, Mahowald expects to get closer to pinpointing dust’s climate impact as Earth warms.
Greenhouse Gas Detection
The mission will continue to identify point-source emissions of methane and carbon dioxide, the greenhouse gases most responsible for climate change, and observations are available through EMIT’s data portal and the U.S. Greenhouse Gas Center.
The EMIT team is also refining the software that identifies and measures greenhouse-gas plumes in the data, and they’re working to streamline the process with machine-learning automation. Aligning with NASA’s open science initiative, they are sharing code with public, private, and nonprofit organizations doing similar work.
“Making this work publicly accessible has fundamentally pushed the science of measuring point-source emissions forward and expanded the use of EMIT data,” said Andrew Thorpe, the JPL research technologist heading the EMIT greenhouse gas effort.
More About EMIT
The EMIT instrument was developed by NASA’s Jet Propulsion Laboratory, which is managed for the agency by Caltech in Pasadena, California. Launched to the International Space Station in July 2022, EMIT is on an extended three-year mission in which it’s supporting a range of research projects. EMIT’s data products are available at the NASA Land Processes Distributed Active Archive Center for use by other researchers and the public.
To learn more about the mission, visit:
https://earth.jpl.nasa.gov/emit/
How the new NISAR satellite will track Earth’s changing surface A planet-rumbling Greenland tsunami seen from above News Media Contacts
Andrew Wang / Jane J. Lee
Jet Propulsion Laboratory, Pasadena, Calif.
626-379-6874 / 818-354-0307
andrew.wang@jpl.nasa.gov / jane.j.lee@jpl.nasa.gov
2024-159
Share
Details
Last Updated Nov 14, 2024 Related Terms
EMIT (Earth Surface Mineral Dust Source Investigation) Earth Earth Science Earth Science Division Jet Propulsion Laboratory Explore More
4 min read NASA and Forest Service Use Balloon to Help Firefighters Communicate
Article 12 mins ago 9 min read The Earth Observer Editor’s Corner: Fall 2024
On September 18, 2024, the National Oceanic and Atmospheric Administration (NOAA) shared the first images…
Article 35 mins ago 3 min read Summary of Aura 20th Anniversary Event
Snippets from The Earth Observer’s Editor’s Corner The last of NASA’s three EOS Flagships –…
Article 37 mins ago Keep Exploring Discover Related Topics
Missions
Humans in Space
Climate Change
Solar System
View the full article
-
By NASA
This photo shows the Optical Telescope Assembly for NASA’s Nancy Grace Roman Space Telescope, which was recently delivered to the largest clean room at the agency’s Goddard Space Flight Center in Greenbelt, Md.NASA/Chris Gunn NASA’s Nancy Grace Roman Space Telescope is one giant step closer to unlocking the mysteries of the universe. The mission has now received its final major delivery: the Optical Telescope Assembly, which includes a 7.9-foot (2.4-meter) primary mirror, nine additional mirrors, and supporting structures and electronics. The assembly was delivered Nov. 7. to the largest clean room at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, where the observatory is being built.
The telescope will focus cosmic light and send it to Roman’s instruments, revealing many billions of objects strewn throughout space and time. Using the mission’s Wide Field Instrument, a 300-megapixel infrared camera, astronomers will survey the cosmos all the way from the outskirts of our solar system toward the edge of the observable universe. Scientists will use Roman’s Coronagraph Instrument to test new technologies for dimming host stars to image planets and dusty disks around them in far better detail than ever before.
“We have a top-notch telescope that’s well aligned and has great optical performance at the cold temperatures it will see in space,” said Bente Eegholm, optics lead for Roman’s Optical Telescope Assembly at NASA Goddard. “I am now looking forward to the next phase where the telescope and instruments will be put together to form the Roman observatory.”
In this photo, optical engineer Bente Eegholm inspects the surface of the primary mirror for NASA’s Nancy Grace Roman Space Telescope. This 7.9-foot (2.4-meter) mirror is a major component of the Optical Telescope Assembly, which also contains nine additional mirrors and supporting structures and electronics.NASA/Chris Gunn Designed and built by L3Harris Technologies in Rochester, New York, the assembly incorporates key optics (including the primary mirror) that were made available to NASA by the National Reconnaissance Office. The team at L3Harris then reshaped the mirror and built upon the inherited hardware to ensure it would meet Roman’s specifications for expansive, sensitive infrared observations.
“The telescope will be the foundation of all of the science Roman will do, so its design and performance are among the largest factors in the mission’s survey capability,” said Josh Abel, lead Optical Telescope Assembly systems engineer at NASA Goddard.
The team at Goddard worked closely with L3Harris to ensure these stringent requirements were met and that the telescope assembly will integrate smoothly into the rest of the Roman observatory.
The assembly’s design and performance will largely determine the quality of the mission’s results, so the manufacturing and testing processes were extremely rigorous. Each optical component was tested individually prior to being assembled and assessed together earlier this year. The tests helped ensure that the alignment of the telescope’s mirrors will change as expected when the telescope reaches its operating temperature in space.
Then, the telescope was put through tests simulating the extreme shaking and intense sound waves associated with launch. Engineers also made sure that tiny components called actuators, which will adjust some of the mirrors in space, move as predicted. And the team measured gases released from the assembly as it transitioned from normal air pressure to a vacuum –– the same phenomenon that has led astronauts to report that space smells gunpowdery or metallic. If not carefully controlled, these gases could contaminate the telescope or instruments.
Upon arrival at NASA’s Goddard Space Flight Center, the Optical Telescope Assembly for the agency’s Nancy Grace Roman Space Telescope was lifted out of the shipping fixture and placed with other mission hardware in Goddard’s largest clean room. Now, it will be installed onto Roman’s Instrument Carrier, a structure that will keep the telescope and Roman’s two instruments optically aligned. The assembly’s electronics box –– essentially the telescope’s brain –– will be mounted within the spacecraft along with Roman’s other electronics.NASA/Chris Gunn Finally, the telescope underwent a month-long thermal vacuum test to ensure it will withstand the temperature and pressure environment of space. The team closely monitored it during cold operating conditions to ensure the telescope’s temperature will remain constant to within a fraction of a degree. Holding the temperature constant allows the telescope to remain in stable focus, making Roman’s high-resolution images consistently sharp. Nearly 100 heaters on the telescope will help keep all parts of it at a very stable temperature.
“It is very difficult to design and build a system to hold temperatures to such a tight stability, and the telescope performed exceptionally,” said Christine Cottingham, thermal lead for Roman’s Optical Telescope Assembly at NASA Goddard.
Now that the assembly has arrived at Goddard, it will be installed onto Roman’s Instrument Carrier, a structure that will keep the telescope and Roman’s two instruments optically aligned. The assembly’s electronics box –– essentially the telescope’s brain –– will be mounted within the spacecraft along with Roman’s other electronics.
With this milestone, Roman remains on track for launch by May 2027.
“Congratulations to the team on this stellar accomplishment!” said J. Scott Smith, the assembly’s telescope manager at NASA Goddard. “The completion of the telescope marks the end of an epoch and incredible journey for this team, and yet only a chapter in building Roman. The team’s efforts have advanced technology and ignited the imaginations of those who dream of exploring the stars.”
Virtually tour an interactive version of the telescope The Nancy Grace Roman Space Telescope is managed at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, with participation by NASA’s Jet Propulsion Laboratory and Caltech/IPAC in Southern California, the Space Telescope Science Institute in Baltimore, and a science team comprising scientists from various research institutions. The primary industrial partners are BAE Systems Inc. in Boulder, Colorado; L3Harris Technologies in Rochester, New York; and Teledyne Scientific & Imaging in Thousand Oaks, California.
By Ashley Balzer
NASA’s Goddard Space Flight Center, Greenbelt, Md.
Media Contact:
Claire Andreoli
NASA’s Goddard Space Flight Center, Greenbelt, Md.
claire.andreoli@nasa.gov
301-286-1940
Explore More
3 min read NASA’s Roman Space Telescope’s ‘Eyes’ Pass First Vision Test
Article 7 months ago 6 min read NASA Successfully Integrates Coronagraph for Roman Space Telescope
Article 2 weeks ago 6 min read Primary Instrument for Roman Space Telescope Arrives at NASA Goddard
Article 3 months ago Share
Details
Last Updated Nov 14, 2024 EditorAshley BalzerContactAshley Balzerashley.m.balzer@nasa.govLocationGoddard Space Flight Center Related Terms
Nancy Grace Roman Space Telescope Exoplanets Goddard Space Flight Center The Universe View the full article
-
By NASA
Skywatching Skywatching Home Eclipses What’s Up Explore the Night Sky Night Sky Network More Tips and Guides FAQ 24 Min Read The Next Full Moon Will Be the Last of Four Consecutive Supermoons
Guardians of Traffic statue in Cleveland, Ohio, in front of the supermoon that was visible on Sept. 17, 2024. On this day, the full moon was a partial lunar eclipse; a supermoon; and a harvest moon. Credits:
NASA/GRC/Sara Lowthian-Hanna The Next Full Moon is a Supermoon; the Beaver, Frost, Frosty, or Snow Moon; Kartik Purnima; Loy Krathong; the Bon Om Touk (”Boat Racing Festival”) Moon, the Tazaungdaing Festival Moon; and Ill Poya.
The next full Moon will be Friday afternoon, November 15, 2024, at 4:29 PM EST. This will be early Saturday morning from Kamchatka and Fiji Time eastwards to the International Date Line. The Pleiades star cluster will appear near the full Moon. The Moon will appear full for about 3 days around this time, from a few hours before sunrise on Thursday morning to a few hours before sunrise on Sunday morning.
This full Moon will be the last of four consecutive supermoons, slightly closer and brighter than the first of the four in mid-August.
The Maine Farmers’ Almanac began publishing Native American names for full Moons in the 1930s. Over time these names have become widely known and used. According to this almanac, as the full Moon in November this is the Beaver Moon, the Frost or Frosty Moon, or the Snow Moon. For the Beaver Moon, one interpretation is that mid-Fall was the time to set beaver traps before the swamps freeze to ensure a supply of warm winter furs. Another interpretation suggests that the name Beaver Moon came from how active the beavers are in this season as they prepare for winter. The Frost, Frosty, or Snow Moon names come from the frosts and early snows that begin this time of year, particularly in northeastern North America.
This is Kartik Purnima (the full Moon of the Hindu lunar month of Kartik) and is celebrated by Hindus, Jains, and Sikhs (each for different reasons).
In Thailand and nearby countries this full Moon is Loy Krathong, a festival that includes decorating baskets and floating them on a river.
In Cambodia this full Moon corresponds with the 3-day Bon Om Touk (“Boat Racing Festival”), the Cambodian Water Festival featuring dragon boat races.
In Myanmar this is the Tazaungdaing Festival, a festival that predates the introduction of Buddhism and includes the launching of hot air balloons (sometimes flaming or laden with fireworks).
In Sri Lanka this is Ill (or Il) Poya, commemorating the Buddha’s ordination of sixty disciples as the first Buddhist missionaries.
In many traditional Moon-based calendars the full Moons fall on or near the middle of each month. This full Moon is near the middle of the tenth month of the Chinese year of the Dragon, Marcheshvan in the Hebrew calendar, a name often shortened to Cheshvan or Heshvan, and Jumādā al-ʾŪlā, the fifth month of the Islamic year.
As usual, the wearing of suitably celebratory celestial attire is encouraged in honor of the full Moon. Get ready for winter, visit a local river (particularly if there are any festivals or boat races), but please don’t launch flaming hot air balloons filled with fireworks (some online videos make it quite clear why this is a bad idea), especially in areas subject to wildfires!
The next month or two should be a great time for Jupiter and Saturn watching. Both will continue to shift westward each night, gradually making them easier to see earlier in the evening sky.
Gordon Johnston
Retired NASA Program Executive
As for other celestial events between now and the full Moon after next (with specific times and angles based on the location of NASA Headquarters in Washington, DC):
As Autumn continues the daily periods of sunlight continue shortening.
On Friday, November 15, (the day of the full Moon), morning twilight will begin at 5:51 AM EST, sunrise will be at 6:51 AM, solar noon will be at 11:53 AM when the Sun will reach its maximum altitude of 32.4 degrees, sunset will be at 4:54 PM, and evening twilight will end at 5:55 PM.
Our 24-hour clock is based on the average length of the solar day. The day of the winter solstice is sometimes called the “shortest day of the year” (because it has the shortest period of sunlight). But it could also be called the “longest day of the year” because the longest solar day is on or just after the solstice. Because the solar days are longer, the earliest sunset of the year occurs before the solstice and the latest sunrise of the year (ignoring Daylight Savings Time) occurs after the solstice. For the Washington, DC area, the sunsets on Friday and Saturday, December 6 and 7, 2024, are tied for the earliest sunsets. On Friday, morning twilight will begin at 6:10 AM EST, sunrise will be at 7:13 AM, solar noon will be at 11:59 AM when the Sun will reach its maximum altitude of 28.5 degrees, sunset will be at 4:45:50 PM, and evening twilight will end at 5:49 PM. On Saturday, morning twilight will begin at 6:11 AM EST, sunrise will be at 7:14 AM, solar noon will actually be at noon (12:00 PM) when the Sun will reach its maximum altitude of 28.4 degrees, sunset will be at 4:45:50 PM, and evening twilight will end at 5:49 PM.
By Sunday, December 15, (the day of the full Moon after next), morning twilight will begin at 6:16 AM EST, sunrise will be at 7:20 AM, solar noon will be at 12:04 PM when the Sun will reach its maximum altitude of 27.8 degrees, sunset will be at 4:47 PM, and evening twilight will end at 5:51 PM.
The next month or two should be a great time for Jupiter and Saturn watching, especially with a backyard telescope. Saturn was at its closest and brightest on September 7 and is high in the southern sky as evening twilight ends. Jupiter will be shifting into the evening sky during this lunar cycle. On November 15 Jupiter will be rising about a half hour after evening twilight ends. Jupiter will be at its closest and brightest on December 7, rising around sunset and setting around sunrise. By the full Moon after next on December 15, Jupiter will be 19 degrees above the horizon as evening twilight ends. Both Jupiter and Saturn will continue to shift westward each night, gradually making them easier to see earlier in the evening sky (and friendlier for backyard stargazing, especially if you have young ones with earlier bedtimes). With clear skies and a telescope you should be able to see Jupiter’s four bright moons, Ganymede, Callisto, Europa, and Io, noticeably shifting positions in the course of an evening. For Saturn, you should be able to see Saturn’s rings and its bright moon Titan. The rings are appearing thinner and will be edge-on to the Earth in March 2025. We won’t get the “classic” view of Saturn showing off its rings until 2026.
Comets
Of the two comets described in my last Moon Missive, one remains visible through large binoculars or a telescope during this lunar cycle. The sungrazing Comet C/2024 S1 (ATLAS) disintegrated during its very close pass by the Sun and is no longer visible. Comet C/2023 A3 (Tsuchinshan-ATLAS) will be in the evening sky, fading from visual magnitude 8 to 10.3 as it moves away from the Earth and Sun.
In addition, comet 33P/LINEAR should be visible with large binoculars or a telescope in November and December, shining at about magnitude 10 around its perihelion on November 29 and closest approach to Earth on December 9. The next comet that we anticipate might be visible to the unaided eye is C/2024 G3 (ATLAS), which will reach its closest to the Sun and Earth in mid January 2025. It is another sungrazing comet that might put on a good show or might break apart and vanish.
Meteor Showers
Unfortunately, one of the three major meteor showers of the year, the Geminids (004 GEM), will peak the morning of December 14, with the light of the nearly full Moon interfering. According to the International Meteor Organization, observers south of about 30 degrees north might be able to see these meteors for an hour or so between moonset and the first light of dawn (although the radiant for this meteor shower is at 33 degrees north latitude, so observers too far south of the equator will also have limited visibility). In a good year, this shower can produce 150 visible meteors per hour under ideal conditions, but this will not be a good year. For the Washington, DC area the MeteorActive app predicts that at about 2 AM EST on the morning of December 14, under bright suburban sky conditions, the peak rate from the Geminids and all other background sources might reach 20 meteors per hour.
If the weather cooperates by being clear with no clouds or hazes and you do go looking for meteors, try to find a place as far as possible from light sources that has a clear view of a wide expanse of the sky. Give your eyes plenty of time to adapt to the dark. Your color vision (cone cells), concentrated in the center of your field of view, will adapt to darkness in about 10 minutes. Your more sensitive night vision rod cells will continue to improve for an hour or more (with most of the improvement in the first 35 to 45 minutes). The more sensitive your eyes are, the more chance you will have of seeing meteors. Since some meteors are faint, you will tend to see more meteors from the “corner of your eye.” Even a short exposure to light (from passing car headlights, etc.) will start the adaptation over again (so no turning on a light or your cell phone to check what time it is).
In addition, a number of relatively minor meteor showers will peak during this lunar cycle. The light of the waning Moon will interfere with the Leonids (013 LEO) on November 17, α-Monocerotids (246 AMO) on November 21, and November Orionids (250 NOO) on November 28. The Phoenicids (254 PHO), best seen from the Southern Hemisphere, may peak around December 1. Models predict low rates and faint meteors this year but not much is known about this meteor shower. Most years the rates are low, but as reported by the International Meteor Organization, significant activity was observed in 2014. Once, in 1956, the Phoenicids reached an estimated rate of 100 visible meteors per hour. Another Southern Hemisphere shower is the Puppid-Velids (301 PUP), expected to peak sometime around December 4 at about 10 meteors per hour (under ideal conditions). The Monocerotids (019 MON) and σ-Hydrids (016 HYD) are both expected to peak on December 9 at 3 meteors per hour and 7 meteors per hour, respectively. These rates are low enough that seeing them from our light-polluted urban areas will be unlikely.
Evening Sky Highlights
On the evening of Friday, November 15 (the evening of the full Moon), as twilight ends (at 5:55 PM EST), the rising Moon will be 14 degrees above the east-northeastern horizon with the Pleiades star cluster 5 degrees to the lower left. The brightest planet in the sky will be Venus at 12 degrees above the southwestern horizon. Next in brightness will be Mercury at less than a degree above the west-southwestern horizon. Saturn will be 38 degrees above the south-southeastern horizon. Comet C/2023 A3 (Tsuchinshan-ATLAS) will be 39 degrees above the west-southwestern horizon, with its current brightness curve predicting it will have faded to magnitude 8, too faint to see with the unaided eye. The bright star closest to overhead will be Deneb at 79 degrees above the northwestern horizon. Deneb (visual magnitude 1.3) is the 19th brightest star in our night sky and is the brightest star in the constellation Cygnus the swan. One of the three bright stars of the “Summer Triangle” (along with Vega and Altair). Deneb is about 20 times more massive than our Sun but has used up its hydrogen, becoming a blue-white supergiant about 200 times the diameter of the Sun. If Deneb were where our Sun is, it would extend to about the orbit of the Earth. Deneb is about 2,600 light years from us.
As this lunar cycle progresses, Saturn and the background of stars will appear to shift westward each evening (as the Earth moves around the Sun). Bright Venus will shift to the left and higher in the sky along the southwestern horizon. Mercury, shining brighter than Saturn, will initially shift left along the southwestern horizon until November 19, after which it will shift to the right. On November 22 Jupiter will join the planets Venus, Mercury and Saturn in the sky as twilight ends, shining brighter than Mercury. November 24 will be the last evening Mercury will be above the horizon as evening twilight ends, although it will remain visible in the glow of dusk for a few more evenings as it dims and shifts towards its passage between the Earth and the Sun on December 5. Jupiter will be at its closest and brightest for the year on December 7. The waxing Moon will pass by Venus on December 4, Saturn on December 7, and the Pleiades on December 13.
By the evening of Saturday, December 14 (the start of the night of the December 15 full Moon), as twilight ends (at 5:50 PM EST), the rising Moon will be 19 degrees above the east-northeastern horizon with bright planet Jupiter 6 degrees to the right and the bright star Aldebaran father to the right. The brightest planet visible will be Venus at 21 degrees above the southwestern horizon. Next in brightness will be Jupiter. Saturn will be 43 degrees above the southern horizon. The bright star closest to overhead will still be Deneb at 61 degrees above the west-northwestern horizon.
Morning Sky Highlights
On the morning of Friday, November 15 (the morning of the full Moon after next), as twilight begins (at 5:51 AM EST), the setting full Moon will be 7 degrees above the west-northwestern horizon. The brightest planet in the sky will be Jupiter at 35 degrees above the western horizon. Mars will be at 68 degrees above the southwestern horizon. Comet C/2024 S1 (ATLAS) will not be visible, even with a telescope, as it broke apart into pieces too small to see as it passed its closest to the Sun on October 28. The bright star appearing closest to overhead will be Pollux at 69 degrees above the west-southwestern horizon (higher than Mars by about a half degree). Pollux is the 17th brightest star in our night sky and the brighter of the twin stars in the constellation Gemini. It is an orange tinted star about 34 lightyears from Earth. Pollux is not quite twice the mass of our Sun but about 9 times the diameter and 33 times the brightness.
As this lunar cycle progresses, Jupiter, Mars, and the background of stars will appear to shift westward each evening, with Mars passing near the Beehive star cluster in early December. The waning Moon will pass by the Pleiades star cluster on November 16, Jupiter on November 17, Mars and Pollux on November 20, appear on the other side of Mars on November 21, Regulus on November 22 and 23, and Spica on November 27 (passing in front of Spica for parts of the USA and Canada). Jupiter will be at its closest and brightest on December 7, rising around sunset and setting around sunrise. December 12 will be the first morning Mercury will be above the east-southeastern horizon as morning twilight begins, though it will be visible in the glow of dawn for a few days before.
By the morning of Sunday, December 15 (the morning of the full Moon after next), as twilight begins (at 6:16 AM EST), the setting full Moon will be 15 degrees above the west-northwestern horizon. The brightest planet in the sky will be Jupiter, appearing below the Moon at 5 degrees above the horizon. Second in brightness will be Mars at 46 degrees above the western horizon, then Mercury at 4 degrees above the east-southeastern horizon. The bright star appearing closest to overhead will be Regulus at 55 degrees above the southwestern horizon, with Arcturus a close second at 52 degrees above the east-southeastern horizon. Regulus is the 21st brightest star in our night sky and the brightest star in the constellation Leo the lion. The Arabic name for Regulus translates as “the heart of the lion.” Although we see Regulus as a single star, it is actually four stars (two pairs of stars orbiting each other). Regulus is about 79 light years from us. Arcturus is the brightest star in the constellation Boötes the herdsman or plowman and the 4th brightest star in our night sky. It is 36.7 light years from us. While it has about the same mass as our Sun, it is about 2.6 billion years older and has used up its core hydrogen, becoming a red giant 25 times the size and 170 times the brightness of our Sun. One way to identify Arcturus in the night sky is to start at the Big Dipper, then follow the arc of the handle as it “arcs towards Arcturus.”
Detailed Daily Guide
Here for your reference is a day-by-day listing of celestial events between now and the full Moon on December 15, 2024. The times and angles are based on the location of NASA Headquarters in Washington, DC, and some of these details may differ for where you are (I use parentheses to indicate times specific to the DC area). If your latitude is significantly different than 39 degrees north (and especially for my Southern Hemisphere readers), I recommend using an astronomy app set for your location or a star-watching guide from a local observatory, news outlet, or astronomy club.
Thursday morning, November 14, at 6:18 EST, the Moon will be at perigee, its closest to the Earth for this orbit.
As mentioned above, the full Moon will be Friday afternoon, November 15, 2024, at 4:29 PM EST. This will be early Saturday morning from Kamchatka and Fiji Time eastwards to the International Date Line. It will be the last of four consecutive supermoons. The Pleiades star cluster will appear near the full Moon. The Moon will appear full for about 3 days around this time, from a few hours before sunrise Thursday morning to a few hours before sunrise Sunday morning.
Friday evening into Saturday morning, November 15 to 16, the Pleiades star cluster will appear near the full Moon. This may best be viewed with binoculars, as the brightness of the full Moon may make it hard to see the stars in this star cluster. As evening twilight ends (at 5:55 PM EST), the Pleiades will appear 5 degrees to the lower left of the full Moon. By the time the Moon reaches its highest for the night (Saturday morning at 12:07 AM), the Pleiades will be 2 degrees to the upper left. The Moon will pass in front of the Pleiades in the early morning hours. By the time morning twilight begins (at 5:52 AM) the Pleiades will be a degree to the lower right of the Moon.
Saturday, November 16, will be when the planet Mercury reaches its greatest angular separation from the Sun as seen from the Earth for this apparition (called greatest elongation). Because the angle between the line from the Sun to Mercury and the line of the horizon changes with the seasons, the date when Mercury and the Sun are farthest apart as seen from the Earth is not always the same as when Mercury appears highest above the southwestern horizon as evening twilight ends, which will occur three evenings later, on November 19.
Saturday night into Sunday morning, November 16 to 17, the planet Uranus will be at its closest and brightest for the year, called “opposition” because on Saturday night it will be opposite the Earth from the Sun. At opposition Uranus can be bright enough to see with the unaided eye (under very clear, dark sky conditions). From our light-polluted urban locations you will need binoculars or a telescope.
Also on Saturday night into Sunday morning, November 16 to 17, the planet Jupiter will appear near the full Moon. As Jupiter rises on the east-northeastern horizon (at 6:14 PM EST) it will be 10 degrees to the lower left of the Moon. The Moon will reach its highest for the night about 7 hours later (at 1:09 AM), with Jupiter 7.5 degrees to the lower left. By the time morning twilight begins (at 5:52 AM) Jupiter will be 6 degrees to the left of the Moon.
Tuesday night into Wednesday morning, November 19 to 20, the bright star Pollux and the bright planet Mars will appear near the waning gibbous Moon. As the Moon rises on the northeastern horizon (at 8:20 PM EST), Pollux will be 2.5 degrees to the upper left of the Moon. By the time the Moon reaches its highest in the sky (at 4:11 AM) Pollux will be 5 degrees to the upper right of the Moon, with Mars 7.5 degrees to the lower left of the Moon, such that these three appear aligned. By the time morning twilight begins (at 5:55 AM) Mars will be 7 degrees to the upper left and Pollux 5.5 degrees to the lower right.
Wednesday night into Thursday morning, November 20 to 21, the waning gibbous Moon will have shifted to the other side of Mars. As the Moon rises on the east-northeastern horizon (at 9:29 PM EST) Mars will be 4 degrees to the upper right of the Moon. By the time the Moon reaches its highest for the night (at 5:03 AM) Mars will be 7 degrees to the right of the Moon. Morning twilight will begin less than an hour later (at 5:56 AM) with Mars 7 degrees to the lower right of the Moon.
Friday evening, November 22, will be the first evening the bright planet Jupiter will be above the east-northeastern horizon as evening twilight ends (at 5:51 PM EST).
Also on Friday evening, the waning Moon will appear half-full as it reaches its last quarter at 8:28 PM EST (when we can’t see it).
Friday night into Saturday morning, November 22 to 23, the bright star Regulus will appear near the waning half-Moon. As Regulus rises on the east-northeastern horizon (at 11:29 PM EST) it will be 9 degrees below the Moon, with Mars farther to the upper right and Pollux beyond Mars. By the time the Moon reaches its highest for the night (at 5:49 AM) Regulus will be 7 degrees to the lower left, and morning twilight will begin 8 minutes later (at 5:57 AM).
Saturday night into Sunday morning, November 23 to 24, the waning crescent Moon will have shifted to the other side of Regulus. When the Moon rises on the east-northeastern horizon (at 11:38 PM EST) Regulus will be 4 degrees to the upper right of the Moon. The pair will separate as the night progresses. By the time morning twilight begins (at 5:58 AM) Regulus will be 6.5 degrees to the upper right of the Moon.
Sunday evening, November 24, will be the last evening the planet Mercury will be above the west-southwestern horizon as evening twilight ends, although it should remain visible in the glow of dusk before twilight ends for a few more evenings as it dims and shifts towards its passage between the Earth and the Sun on December 5.
Tuesday morning, November 26, at 6:57 AM EST, the Moon will be at apogee, its farthest from the Earth for this orbit.
On Wednesday morning, November 27, the bright star Spica will appear near the waning crescent Moon. As Spica rises on the east-southeastern horizon (at 3:41 AM EST) it will be a degree below the Moon. As morning progresses the Moon will shift towards Spica, and for much of the Eastern USA and Canada the Moon will block Spica from view. See http://www.lunar-occultations.com/iota/bstar/1127zc1925.htm for a map and information on the areas that will be able to see this eclipse. Times will vary by location, but for the Washington, DC area, Spica will vanish behind the illuminated limb of the Moon at 5:34 AM and the Moon will still be blocking Spica from sight as morning twilight begins at 6:02 AM.
Early Sunday morning, December 1, at 1:22 AM EST, will be the new Moon, when the Moon passes between the Earth and the Sun and will not be visible from the Earth.
The day of or the day after the New Moon marks the start of the new month for most moon-based calendars. The eleventh month of the Chinese year of the Dragon starts on Sunday, December 1. Sundown on Sunday, December 1, marks the start of Kislev in the Hebrew calendar. Hanukkah will begin towards the end of Kislev. In the Islamic calendar the months traditionally start with the first sighting of the waxing crescent Moon. Many Muslim communities now follow the Umm al-Qura Calendar of Saudi Arabia, which uses astronomical calculations to start months in a more predictable way. Using this calendar, sundown on Sunday, December 1, will probably mark the beginning of Jumādā ath-Thāniyah, also known as Jumādā al-ʾĀkhirah.
Wednesday evening, December 4, the bright planet Venus will appear 3 degrees to the upper right of the waxing crescent Moon. The Moon will be 15 degrees above the southwestern horizon as evening twilight ends (at 5:49 PM EST). The Moon will set 2 hours later (at 7:46 PM).
Thursday evening, December 5, the planet Mercury will be passing between the Earth and the Sun as seen from the Earth, called inferior conjunction. Planets that orbit inside of the orbit of Earth can have two types of conjunctions with the Sun, inferior (when passing between the Earth and the Sun) and superior (when passing on the far side of the Sun as seen from the Earth). Mercury will be shifting from the evening sky to the morning sky and will begin emerging from the glow of dawn on the eastern horizon in less than a week.
Saturday afternoon, December 7, the planet Jupiter will be at its closest and brightest for the year, called “opposition” because it will be opposite the Earth from the Sun, effectively a “full” Jupiter. Jupiter will be 12 degrees above the east-northeastern horizon as evening twilight ends (at 5:49 PM EST), will reach its highest in the sky right around midnight (11:59 PM), and will be 11 degrees above the west-northwestern horizon as morning twilight begins (Sunday morning at 6:11 AM). Only planets that orbit farther from the Sun than the Earth can be seen at opposition.
Saturday evening, December 7, the planet Saturn will appear to the upper left of the waxing crescent Moon. They will be 6 degrees apart as evening twilight ends (at 5:49 PM EST). Saturn will appear to shift clockwise and closer to the Moon, so that by the time the Moon sets 5.5 hours later (at 11:18 PM) Saturn will be 3.5 degrees above the Moon on the west-southwestern horizon. For a swath in the Pacific Ocean off the coast of Asia the Moon will actually block Saturn from view, see http://lunar-occultations.com/iota/planets/1208saturn.htm for a map and information on the locations that can see this eclipse.
Sunday morning, December 8, the Moon will appear half-full as it reaches its first quarter at 10:27 AM EST (when we can’t see it).
Thursday morning, December 12, will be the first morning the planet Mercury will be above the east-southeastern horizon as morning twilight begins (at 6:14 AM EST).
Thursday morning, December 12, at 8:18 AM EST, the Moon will be at perigee, its closest to the Earth for this orbit.
Friday evening into Saturday morning, December 13 to 14, the Pleiades star cluster will appear near the full Moon. This may best be viewed with binoculars, as the brightness of the full Moon may make it hard to see the stars in this star cluster. As evening twilight ends (at 5:50 PM EST), the Pleiades will appear 4 degrees to the upper right of the full Moon. By the time the Moon reaches its highest for the night (at 10:49 PM), the Pleiades will be 6 degrees to the right. By about 2 AM the Pleiades will be 8 degrees to the lower right of the Moon and they will continue to separate as the morning progresses.
As mentioned above, one of the three major meteor showers of the year, the Geminids (004 GEM), will peak Saturday morning, December 14. The light of the nearly full Moon will interfere. In a good year, this shower can produce 150 visible meteors per hour under ideal conditions, but this will not be a good year. For the Washington, DC area the MeteorActive app predicts that at about 2 AM EST on the morning of December 14, under bright suburban sky conditions, the peak rate from the Geminids and all other background sources might reach 20 meteors per hour. See the meteor summary above for suggestions for meteor viewing.
Saturday morning, December 14, the full Moon, the bright planet Jupiter, and the bright star Aldebaran will form a triangle. As Aldebaran sets on the west-northwestern horizon (at 6:10 AM EST) it will be 9 degrees to the lower left of the Moon with Jupiter 7 degrees to the upper left of the Moon. Morning twilight will begin 6 minutes later.
Saturday evening, December 15, the full Moon will have shifted to the other side of Jupiter. Jupiter will be 6 degrees to the right of the Moon as evening twilight ends (at 5:50 PM EST) and the pair will separate as the night progresses.
The full Moon after next will be Sunday morning, December 15, 2024, at 4:02 AM EST. This will be Saturday evening from Alaska Time westwards to the International Date Line. The Moon will appear full for about 3 days around this time, from Friday evening through Monday morning, making this a full Moon weekend.
Share
Details
Last Updated Nov 13, 2024 Related Terms
Earth’s Moon Skywatching Skywatching Tips Supermoons Keep Exploring Discover More Topics From NASA
Moon Phases
Moon Viewing Guide
Asteroids, Comets & Meteors
Planets
View the full article
-
By NASA
MuSat2 at Vandenberg Air Force Base, prior to launch. MuSat2 leverages a dual-frequency science antenna developed with support from NASA to measure phenomena such as ocean wind speed. Muon Space A science antenna developed with support from NASA’s Earth Science Technology Office (ESTO) is now in low-Earth orbit aboard MuSat2, a commercial remote-sensing satellite flown by the aerospace company Muon Space. The dual-frequency science antenna was originally developed as part of the Next Generation GNSS Bistatic Radar Instrument (NGRx). Aboard MuSat2, it will help measure ocean surface wind speed—an essential data point for scientists trying to forecast how severe a burgeoning hurricane will become.
“We’re very interested in adopting this technology and pushing it forward, both from a technology perspective and a product perspective,” said Jonathan Dyer, CEO of Muon.
Using this antenna, MuSat2 will gather signals transmitted by navigation satellites as they scatter off Earth’s surface and back into space. By recording how those scattered navigation signals change as they interact with Earth’s surface, MuSat2 will provide meteorologists with data points they can use to study severe weather.
“We use the standard GPS signals you know—the navigation signals that work for your car and your cell phone,” explained Chris Ruf, director of the University of Michigan Space Institute and principal investigator for NGRx.
Ruf designed the entire NGRx system to be an updated version of the sensors on NASA’s Cyclone Global Navigation Satellite System (CYGNSS), another technology he developed with support from ESTO. Since 2016, data from CYGNSS has been a critical resource for people dedicated to forecasting hurricanes.
The science antenna aboard MuSat2 enables two key improvements to the original CYGNSS design. First, the antenna allows MuSat2 to gather measurements from satellites outside the U.S.-based GPS system, such as the European Space Agency’s Galileo satellites. This capability enables MuSat2 to collect more data as it orbits Earth, improving its assessments of conditions on the planet’s surface.
Second, whereas CYGNSS only collected cross-polar radar signals, the updated science antenna also collects co-polar radar signals. This additional information could provide improved information about soil moisture, sea ice, and vegetation. “There’s a whole lot of science value in looking at both polarization components scattering from the Earth’s surface. You can separate apart the effects of vegetation from the effects of surface, itself,” explained Ruf.
Hurricane Ida, as seen from the International Space Station. NASA-developed technology onboard MuSat2 will help supply the U.S. Air Force with critical data for producing reliable weather forecasts. NASA For Muon Space, this technology infusion has been helpful to the company’s business and science missions. Dallas Masters, Vice President of Muon’s Signals of Opportunity Program, explains that NASA’s investments in NGRx technology made it much easier to produce a viable commercial remote sensing satellite. According to Masters, “NGRx-derived technology allowed us to start planning a flight mission early in our company’s existence, based around a payload we knew had flight heritage.”
Dyer agrees. “The fact that ESTO proves out these measurement approaches – the technology and the instrument, the science that you can actually derive, the products from that instrument – is a huge enabler for companies like ours, because we can adopt it knowing that much of the physics risk has been retired,” he said.
Ultimately, this advanced antenna technology for measuring ocean surface wind speed will make it easier for researchers to turn raw data into actionable science products and to develop more accurate forecasts.
“Information is absolutely precious. When it comes to forecast models and trying to understand what’s about to happen, you have to have as good an idea as you can of what’s already happening in the real world,” said oceanographer Lew Gramer, an Associate Scientist with the Cooperative Institute For Marine And Atmospheric Studies and NOAA’s Hurricane Research Division.
Project Lead: Chris Ruf, University of Michigan
Sponsoring Organizations: NASA’s Earth Science Technology Office and Muon Space
Share
Details
Last Updated Nov 12, 2024 Related Terms
CYGNSS (Cyclone Global Navigation Satellite System) Earth Science Earth Science Division Earth Science Technology Office Oceans Science-enabling Technology Technology Highlights Explore More
22 min read Summary of the Second OMI–TROPOMI Science Team Meeting
Article
1 hour ago
3 min read Integrating Relevant Science Investigations into Migrant Children Education
Article
6 days ago
2 min read Sadie Coffin Named Association for Advancing Participatory Sciences/NASA Citizen Science Leaders Series Fellow
Article
1 week ago
View the full article
-
-
Check out these Videos
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.