Members Can Post Anonymously On This Site
-
Similar Topics
-
By NASA
X-ray: NASA/CXC/Technion/N. Keshet et al.; Illustration: NASA/CXC/SAO/M. Weiss People often think about archaeology happening deep in jungles or inside ancient pyramids. However, a team of astronomers has shown that they can use stars and the remains they leave behind to conduct a special kind of archaeology in space.
Mining data from NASA’s Chandra X-ray Observatory, the team of astronomers studied the relics that one star left behind after it exploded. This “supernova archaeology” uncovered important clues about a star that self-destructed – probably more than a million years ago.
Today, the system called GRO J1655-40 contains a black hole with nearly seven times the mass of the Sun and a star with about half as much mass. However, this was not always the case.
Originally GRO J1655-40 had two shining stars. The more massive of the two stars, however, burned through all of its nuclear fuel and then exploded in what astronomers call a supernova. The debris from the destroyed star then rained onto the companion star in orbit around it, as shown in the artist’s concept.
This artist’s impression shows the effects of the collapse and supernova explosion of a massive star. A black hole (right) was formed in the collapse and debris from the supernova explosion is raining down onto a companion star (left), polluting its atmosphere.CXC/SAO/M. Weiss With its outer layers expelled, including some striking its neighbor, the rest of the exploded star collapsed onto itself and formed the black hole that exists today. The separation between the black hole and its companion would have shrunk over time because of energy being lost from the system, mainly through the production of gravitational waves. When the separation became small enough, the black hole, with its strong gravitational pull, began pulling matter from its companion, wrenching back some of the material its exploded parent star originally deposited.
While most of this material sank into the black hole, a small amount of it fell into a disk that orbits around the black hole. Through the effects of powerful magnetic fields and friction in the disk, material is being sent out into interstellar space in the form of powerful winds.
This is where the X-ray archaeological hunt enters the story. Astronomers used Chandra to observe the GRO J1655-40 system in 2005 when it was particularly bright in X-rays. Chandra detected signatures of individual elements found in the black hole’s winds by getting detailed spectra – giving X-ray brightness at different wavelengths – embedded in the X-ray light. Some of these elements are highlighted in the spectrum shown in the inset.
The team of astronomers digging through the Chandra data were able to reconstruct key physical characteristics of the star that exploded from the clues imprinted in the X-ray light by comparing the spectra with computer models of stars that explode as supernovae. They discovered that, based on the amounts of 18 different elements in the wind, the long-gone star destroyed in the supernova was about 25 times the mass of the Sun, and was much richer in elements heavier than helium in comparison with the Sun.
This analysis paves the way for more supernova archaeology studies using other outbursts of double star systems.
A paper describing these results titled “Supernova Archaeology with X-Ray Binary Winds: The Case of GRO J1655−40” was published in The Astrophysical Journal in May 2024. The authors of this study are Noa Keshet (Technion — Israel Institute of Technology), Ehud Behar (Technion), and Timothy Kallman (NASA’s Goddard Space Flight Center).
NASA’s Marshall Space Flight Center in Huntsville, Alabama, manages the Chandra program. The Smithsonian Astrophysical Observatory’s Chandra X-ray Center controls science operations from Cambridge, Massachusetts, and flight operations from Burlington, Massachusetts.
Read more from NASA’s Chandra X-ray Observatory.
Learn more about the Chandra X-ray Observatory and its mission here:
https://www.nasa.gov/chandra
https://chandra.si.edu
Visual Description
This release features an artist’s rendering of a supernova explosion, inset with a spectrum graph.
The artist’s illustration features a star and a black hole in a system called GRO J1655-40. Here, the black hole is represented by a black sphere to our upper right of center. The star is represented by a bright yellow sphere to our lower left of center. In this illustration, the artist captures the immensely powerful supernova as a black hole is created from the collapse of a massive star, with an intense burst of blurred beams radiating from the black sphere. The blurred beams of red, orange, and yellow light show debris from the supernova streaking across the entire image in rippling waves. These beams rain debris on the bright yellow star.
When astronomers used the Chandra X-ray Observatory to observe the system in 2005, they detected signatures of individual elements embedded in the X-ray light. Some of those elements are highlighted in the spectrum graph shown in the inset, positioned at our upper lefthand corner.
The graph’s vertical axis, on our left, indicates X-ray brightness from 0.0 up to 0.7 in intensity units. The horizontal axis, at the bottom of the graph, indicates Wavelength from 6 to 12 in units of Angstroms. On the graph, a tight zigzagging line begins near the top of the vertical axis, and slopes down toward the far end of the horizontal axis. The sharp dips show wavelengths where the light has been absorbed by different elements, decreasing the X-ray brightness. Some of the elements causing these dips have been labeled, including Silicon, Magnesium, Iron, Nickel, Neon, and Cobalt.
News Media Contact
Megan Watzke
Chandra X-ray Center
Cambridge, Mass.
617-496-7998
mwatzke@cfa.harvard.edu
Lane Figueroa
Marshall Space Flight Center, Huntsville, Alabama
256-544-0034
lane.e.figueroa@nasa.gov
View the full article
-
By NASA
5 min read
Atomic Layer Processing Coating Techniques Enable Missions to See Further into the Ultraviolet
Astrophysics observations at ultraviolet (UV) wavelengths often probe the most dynamic aspects of the universe. However, the high energy of ultraviolet photons means that their interaction with the materials that make up an observing instrument are less efficient, resulting in low overall throughput. New approaches in the development of thin film coatings are addressing this shortcoming by engineering the coatings of instrument structures at the atomic scale.
Researchers at the NASA Jet Propulsion Laboratory (JPL) are employing atomic layer deposition (ALD) and atomic layer etching (ALE) to enable new coating technologies for instruments measuring ultraviolet light. Conventional optical coatings largely rely on physical vapor deposition (PVD) methods like evaporation, where the coating layer is formed by vaporizing the source material and then condensing it onto the intended substrate. In contrast, ALD and ALE rely on a cyclic series of self-limiting chemical reactions that result in the deposition (or removal) of material one atomic layer at a time. This self-limiting characteristic results in a coating or etchings that are conformal over arbitrary shapes with precisely controlled layer thickness determined by the number of ALD or ALE cycles performed.
The ALD and ALE techniques are common in the semiconductor industry where they are used to fabricate high-performance transistors. Their use as an optical coating method is less common, particularly at ultraviolet wavelengths where the choice of optical coating material is largely restricted to metal fluorides instead of more common metal oxides, due to the larger optical band energy of fluoride materials, which minimizes absorption losses in the coatings. Using an approach based on co-reaction with hydrogen fluoride, the team at JPL has developed a variety of fluoride-based ALD and ALE processes.
(left) The Supernova remnants and Proxies for ReIonization Testbed Experiment (SPRITE) CubeSat primary mirror inside the ALD coating facility at JPL, the mirror is 18 cm on the long and is the largest optic coated in this chamber to-date. (right) Flight optic coating inside JPL ALD chamber for Pioneers Aspera Mission. Like SPRITE, the Aspera coating combines a lithium fluoride process developed at NASA GSFC with thin ALD encapsulation of magnesium fluoride at JPL. Image Credit: NASA-JPL In addition to these metal-fluoride materials, layers of aluminum are often used to construct structures like reflective mirrors and bandpass filters for instruments operating in the UV. Although aluminum has high intrinsic UV reflectance, it also readily forms a surface oxide that strongly absorbs UV light. The role of the metal fluoride coating is then to protect the aluminum surface from oxidation while maintaining enough transparency to create a mirror with high reflectance.
The use of ALD in this context has initially been pursued in the development of telescope optics for two SmallSat astrophysics missions that will operate in the UV: the Supernova remnants and Proxies for ReIonization Testbed Experiment (SPRITE) CubeSat mission led by Brian Fleming at the University of Colorado Boulder, and the Aspera mission led by Carlos Vargas at the University of Arizona. The mirrors for SPRITE and Aspera have reflective coatings that utilize aluminum protected by lithium fluoride using a novel PVD processes developed at NASA Goddard Space Flight Center, and an additional very thin top coating of magnesium fluoride deposited via ALD.
Team member John Hennessy prepares to load a sample wafer in the ALD coating chamber at JPL. Image Credit: NASA JPL The use of lithium fluoride enables SPRITE and Aspera to “see” further into the UV than other missions like NASA’s Hubble Space Telescope, which uses only magnesium fluoride to protect its aluminum mirror surfaces. However, a drawback of lithium fluoride is its sensitivity to moisture, which in some cases can cause the performance of these mirror coatings to degrade on the ground prior to launch. To circumvent this issue, very thin layers (~1.5 nanometers) of magnesium fluoride were deposited by ALD on top of the lithium fluoride on the SPRITE and Aspera mirrors. The magnesium fluoride layers are thin enough to not strongly impact the performance of the mirror at the shortest wavelengths, but thick enough to enhance the stability against humidity during ground phases of the missions. Similar approaches are being considered for the mirror coatings of the future NASA flagship Habitable Worlds Observatory (HWO).
Multilayer structures of aluminum and metal fluorides can also function as bandpass filters (filters that allow only signals within a selected range of wavelengths to pass through to be recorded) in the UV. Here, ALD is an attractive option due to the inherent repeatability and precise thickness control of the process. There is currently no suitable ALD process to deposit aluminum, and so additional work by the JPL team has explored the development of a custom vacuum coating chamber that combines the PVD aluminum and ALD fluoride processes described above. This system has been used to develop UV bandpass filters that can be deposited directly onto imaging sensors like silicon (Si) CCDs. These coatings can enable such sensors to operate with high UV efficiency, but low sensitivity to longer wavelength visible photons that would otherwise add background noise to the UV observations.
Structures composed of multilayer aluminum and metal fluoride coatings have recently been delivered as part of a UV camera to the Star-Planet Activity Research CubeSat (SPARCS) mission led by Evgenya Shkolnik at Arizona State University. The JPL-developed camera incorporates a delta-doped Si CCD with the ALD/PVD filter coating on the far ultraviolet channel, yielding a sensor with high efficiency in a band centered near 160 nm with low response to out-of-band light.
A prototype of a back-illuminated CCD incorporating a multi-layer metal-dielectric bandpass filter coating deposited by a combination of thermal evaporation and ALD. This coating combined with JPL back surface passivation approaches enable the Si CCD to operate with high UV efficiency while rejecting longer wavelength light. Image credit: NASA JPL Next, the JPL team that developed these coating processes plans to focus on implementing a similar bandpass filter on an array of larger-format Si Complementary Metal-Oxide-Semiconductor (CMOS) sensors for the recently selected NASA Medium-Class Explorer (MIDEX) UltraViolet EXplorer (UVEX) mission led by Fiona Harrison at the California Institute of Technology, which is targeted to launch in the early 2030s.
For additional details, see the entry for this project on NASA TechPort
Project Lead: Dr. John Hennessy, Jet Propulsion Laboratory (JPL)
Share
Details
Last Updated Mar 18, 2025 Related Terms
Technology Highlights Astrophysics Astrophysics Division Jet Propulsion Laboratory Science-enabling Technology Explore More
5 min read NASA’s Webb Images Young, Giant Exoplanets, Detects Carbon Dioxide
Article
1 day ago
2 min read Hubble Sees a Spiral and a Star
Article
4 days ago
4 min read Discovery Alert: ‘Super-Earth’ Swings from Super-Heated to Super-Chill
Article
7 days ago
View the full article
-
By NASA
Students, mentors, and team supporters donning team colors watch robots clash on the playing field at the FIRST Robotics Los Angeles regional competition in El Segundo on March 16. NASA/JPL-Caltech Robots built by high schoolers vied for points in a fast-moving game inspired by complex ocean ecosystems at the FIRST Robotics Los Angeles regional competition.
High school students who spent weeks designing, assembling, and testing 125-pound rolling robots put their fast-moving creations into the ring over the weekend, facing off at the annual Los Angeles regional FIRST Robotics Competition, an event supported by NASA’s Jet Propulsion Laboratory in Southern California.
Four of the 43 participating teams earned a chance to compete in April at the FIRST international championship tournament in Houston, which draws winning teams from across the country.
Held March 14 to 16 at the Da Vinci Schools campus in El Segundo, the event is one of many supported by the nonprofit FIRST (For Inspiration and Recognition of Science and Technology), which pairs students with STEM professionals. Teams receive the game rules, which change every year, in January and sprint toward competition, assembling their robot based on FIRST’s specifications. The global competition not only gives students engineering experience but also helps them develop business skills with a range of activities, from fundraising for their team to marketing.
For this year’s game, called “Reefscape,” two alliances of three teams competed for points during each 2½-minute match. That meant six robots at a time sped across the floor, knocking into each other and angling to seed “coral” (pieces of PVC pipe) on “reefs” and harvesting “algae” (rubber balls). In the final seconds of each round, teams could earn extra points if their robots were able to hoist themselves into the air and dangle from hanging cages, as though they were ascending to the ocean surface.
The action was set to a bouncy soundtrack that reverberated through the gym, while in the bleachers there were choreographed dancing, loud cheers, pom-poms, and even some tears.
The winning alliance was composed of Warbots from Downey’s Warren High School, TorBots from Torrance’s South High School, and West Torrance Robotics from Torrance’s West High School. The Robo-Nerds of Benjamin Franklin High in Los Angeles’ Highland Park and Robo’Lyon from Notre Dame de Bellegarde outside Lyon, France, won awards that mean they’ll also get to compete in Houston, alongside the Warbots and the TorBots.
NASA and its Robotics Alliance Project provide grants for high school teams across the country and support FIRST Robotics competitions to encourage students to pursue STEM careers in aerospace. For the L.A. regional competition, JPL has coordinated volunteers — and provided coaching and mentoring to teams, judges, and other competition support — for 25 years.
For more information about the FIRST Los Angeles regional, visit:
https://cafirst.org/frc/losangeles/
News Media Contact
Melissa Pamer
Jet Propulsion Laboratory, Pasadena, Calif.
626-314-4928
melissa.pamer@jpl.nasa.gov
2025-037
Share
Details
Last Updated Mar 17, 2025 Related Terms
Jet Propulsion Laboratory Explore More
3 min read NASA Analysis Shows Unexpected Amount of Sea Level Rise in 2024
Article 4 days ago 6 min read Cosmic Mapmaker: NASA’s SPHEREx Space Telescope Ready to Launch
Article 1 week ago 5 min read NASA Turns Off 2 Voyager Science Instruments to Extend Mission
Article 2 weeks ago Keep Exploring Discover More Topics From NASA
Missions
Humans in Space
Climate Change
Solar System
View the full article
-
By NASA
This video sparkles with synthetic supernovae from the OpenUniverse project, which simulates observations from NASA’s upcoming Nancy Grace Roman Space Telescope. More than a million exploding stars flare into visibility and then slowly fade away. The true brightness of each transient event has been magnified by a factor of 10,000 for visibility, and no background light has been added to the simulated images. The pattern of squares shows Roman’s full field of view.Credit: NASA’s Goddard Space Flight Center and M. Troxel The universe is ballooning outward at an ever-faster clip under the power of an unknown force dubbed dark energy. One of the major goals for NASA’s upcoming Nancy Grace Roman Space Telescope is to help astronomers gather clues to the mystery. One team is setting the stage now to help astronomers prepare for this exciting science.
“Roman will scan the cosmos a thousand times faster than NASA’s Hubble Space Telescope can while offering Hubble-like image quality,” said Rebekah Hounsell, an assistant research scientist at the University of Maryland-Baltimore county working at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, and a co-principal investigator of the Supernova Cosmology Project Infrastructure Team preparing for the mission’s High-Latitude Time-Domain Survey. “We’re going to have an overwhelming amount of data, and we want to make it so scientists can use it from day one.”
Roman will repeatedly look at wide, deep regions of the sky in near-infrared light, opening up a whole new view of the universe and revealing all sorts of things going bump in the night. That includes stars being shredded as they pass too close to a black hole, intense emissions from galaxy centers, and a variety of stellar explosions called supernovae.
To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
This data sonification transforms a vast simulation of a cosmic survey from NASA’s upcoming Nancy Grace Roman Space Telescope into a symphony of stellar explosions. Each supernova’s brightness controls its volume, while its color sets its pitch –– redder, more distant supernovae correspond to deep, low tones while bluer, nearer ones correspond to higher frequencies. The sound in stereo mirrors their locations in the sky. The result sounds like celestial wind chimes, offering a way to “listen” to cosmic fireworks. Credit: NASA’s Goddard Space Flight Center, M. Troxel, SYSTEM Sounds (M. Russo, A. Santaguida) Cosmic Radar Guns
Scientists estimate around half a dozen stars explode somewhere in the observable universe every minute. On average, one of them will be a special variety called type Ia that can help astronomers measure the universe.
These explosions peak at a similar intrinsic brightness, allowing scientists to find their distances simply by measuring how bright they appear.
Scientists can also study the light of these supernovae to find out how quickly they are moving away from us. By comparing how fast they’re receding at different distances, scientists will trace cosmic expansion over time.
Using dozens of type Ia supernovae, scientists discovered that the universe’s expansion is accelerating. Roman will find tens of thousands, including very distant ones, offering more clues about the nature of dark energy and how it may have changed throughout the history of the universe.
“Roman’s near-infrared view will help us peer farther because more distant light is stretched, or reddened, as it travels across expanding space,” said Benjamin Rose, an assistant professor at Baylor University in Waco, Texas, and a co-principal investigator of the infrastructure team. “And opening a bigger window, so to speak, will help us get a better understanding of these objects as a whole,” which would allow scientists to learn more about dark energy. That could include discovering new physics, or figuring out the universe’s fate.
The People’s Telescope
Members of the planning team have been part of the community process to seek input from scientists worldwide on how the survey should be designed and how the analysis pipeline should work. Gathering public input in this way is unusual for a space telescope, but it’s essential for Roman because each large, deep observation will enable a wealth of science in addition to fulfilling the survey’s main goal of probing dark energy.
Rather than requiring that many individual scientists submit proposals to reserve their own slice of space telescope time, Roman’s major surveys will be coordinated openly, and all the data will become public right away.
“Instead of a single team pursuing one science goal, everyone will be able to comb through Roman’s data for a wide variety of purposes,” Rose said. “Everyone will get to play right away.”
This animation shows a possible tiling pattern of part of NASA’s Nancy Grace Roman Space Telescope’s High Latitude Time-Domain Survey. The observing program, which is being designed by a community process, is expected to have two components: wide (covering 18 square degrees, a region of sky as large as about 90 full moons) and deep (covering about 5.5 square degrees, about as large as 25 full moons). This animation shows the deeper portion, which would peer back to when the universe was about 500 million years old, less than 4 percent of its current age of 13.8 billion years.Credit: NASA’s Goddard Space Flight Center This Is a Drill
NASA plans to announce the survey design for Roman’s three core surveys, including the High-Latitude Time-Domain Survey, this spring. Then the planning team will simulate it in its entirety.
“It’s kind of like a recipe,” Hounsell said. “You put in your observing strategy — how many days, which filters — and add in ‘spices’ like uncertainties, calibration effects, and the things we don’t know so well about the instrument or supernovae themselves that would affect our results. We can inject supernovae into the synthetic images and develop the tools we’ll need to analyze and evaluate the data.”
Scientists will continue using the synthetic data even after Roman begins observing, tweaking all aspects of the simulation and correcting unknowns to see which resulting images best match real observations. Scientists can then fine-tune our understanding of the universe’s underlying physics.
“We assume that all supernovae are the same regardless of when they occurred in the history of the universe, but that might not be the case,” Hounsell said. “We’re going to look further back in time than we’ve ever done with type Ia supernovae, and we’re not completely sure if the physics we understand now will hold up.”
There are reasons to suspect they may not. The very first stars were made almost exclusively of hydrogen and helium, compared to stars today which contain several dozen elements. Those ancient stars also lived in very different environments than stars today. Galaxies were growing and merging, and stars were forming at a furious pace before things began calming down between about 8 and 10 billion years ago.
“Roman will very dramatically add to our understanding of this cosmic era,” Rose said. “We’ll learn more about cosmic evolution and dark energy, and thanks to Roman’s large deep view, we’ll get to do much more science too with the same data. Our work will help everyone hit the ground running after Roman launches.”
For more information about the Roman Space Telescope visit www.nasa.gov/roman.
The Nancy Grace Roman Space Telescope is managed at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, with participation by NASA’s Jet Propulsion Laboratory and Caltech/IPAC in Southern California, the Space Telescope Science Institute in Baltimore, and a science team comprising scientists from various research institutions. The primary industrial partners are BAE Systems Inc. in Boulder, Colorado; L3Harris Technologies in Rochester, New York; and Teledyne Scientific & Imaging in Thousand Oaks, California.
By Ashley Balzer
NASA’s Goddard Space Flight Center, Greenbelt, Md.
Media contact:
Claire Andreoli
NASA’s Goddard Space Flight Center, Greenbelt, Md.
301-286-1940
Explore More
7 min read NASA’s Roman and ESA’s Euclid Will Team Up To Investigate Dark Energy
Article 2 years ago 7 min read NASA’s Roman Mission to Probe Cosmic Secrets Using Exploding Stars
Article 4 years ago 4 min read NASA Successfully Joins Sunshade to Roman Observatory’s ‘Exoskeleton’
Article 4 weeks ago Share
Details
Last Updated Mar 11, 2025 EditorAshley BalzerContactAshley Balzerashley.m.balzer@nasa.govLocationGoddard Space Flight Center Related Terms
Nancy Grace Roman Space Telescope Dark Energy Goddard Space Flight Center Stars The Universe View the full article
-
By NASA
The NASA Ames Science Directorate recognizes the outstanding contributions of (pictured left to right) Jessica Kong, Josh Alwood, and Sam Kim. Their commitment to the NASA mission represents the entrepreneurial spirit, technical expertise, and collaborative disposition needed to explore this world and beyond.
Space Science and Astrobiology Star: Jessica Kong
Jessica Kong is serving as the Facility Service Manager (FSM) for the Astrobiology and Life Science Lab building for the Exobiology Branch while the FSM is away on parental leave. She has applied her expertise as a chemist to connect seamlessly and effectively with N239 staff, and safety, and facility personnel, as well as to coordinate repairs and building shutdowns while minimizing disruption to laboratory research.
Space Biosciences Star: Josh Alwood
Josh Alwood is a researcher for the Space Biosciences Research Branch, focusing on bone biology and biomechanics, reproductive biology, and the nervous system. His pioneering research on molecular mechanisms of skeletal adaptation during spaceflight has advanced the development of countermeasures to protect astronaut health on long-duration missions.
Earth Science Star: Sam Kim
Sam Kim, a systems administrator and deputy project manager with the Earth Science Project Office (ESPO), serves many roles and excels in each one of them. During the 2024 ASIA-AQ field mission, Sam deployed for over two months as a key member of the advanced staging team at each of the mission’s four overseas field sites, ensuring that the facilities were ready for the arrival of the ASIA-AQ science and instrument team, while still performing his mission-critical role as systems administrator.
View the full article
-
-
Check out these Videos
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.