Jump to content

40 Years Ago: STS-41B, the First Flight of the Manned Maneuvering Unit


NASA

Recommended Posts

  • Publishers

On Feb. 3, 1984, space shuttle Challenger took off on its fourth flight, STS-41B. Its five-person crew of Commander Vance D. Brand, Pilot Robert L. “Hoot” Gibson, and Mission Specialists Ronald E. McNair, Robert L. Stewart, and Bruce McCandless flew an eight-day mission ending with the first return to NASA’s Kennedy Space Center (KSC) in Florida. Many of the flight activities practiced tasks required for the upcoming Solar Maximum Mission satellite retrieval and repair mission. Among these, successful test flights of the Manned Maneuvering Unit (MMU) astronaut propulsion device during two untethered spacewalks proved the most critical, and visually spectacular. The two commercial communications satellites, Westar VI and Palapa-B2, successfully deployed during the mission ended up in non-operational orbits due to upper stage failures.

The STS-41B crew of Commander Vance D. Brand, Mission Specialists Robert L. Stewart, Ronald E. McNair, and Bruce McCandless, and Pilot Robert L. “Hoot” Gibson The STS-41B crew patch Challenger’s payload bay for STS-41B
Left: The STS-41B crew of (clockwise from bottom left) Commander Vance D. Brand, Mission Specialists Robert L. Stewart, Ronald E. McNair, and Bruce McCandless, and Pilot Robert L. “Hoot” Gibson. Middle: The STS-41B crew patch. Right: Challenger’s payload bay for STS-41B.

On Feb. 4, 1983, NASA announced Brand, Gibson, McNair, Stewart, and McCandless as the STS-11 crew. Brand, the flight’s only veteran, had flown on the Apollo-Soyuz Test Project in 1975 and commanded STS-5 in 1982. For the other four, STS-41B represented their first trip into space, although McCandless had served as an astronaut since his selection in 1966. He helped to develop the MMU and as a backup crew member for the Skylab 2 mission in 1973, he helped train astronauts to fly the Astronaut Maneuvering Unit, the MMU’s predecessor, inside Skylab. Gibson, McNair, and Stewart joined NASA as astronauts in 1978. At the time of the crew announcement, the seven-day mission’s objectives included the Large Format Camera for Earth photography, deploying the Palapa-B2 communications satellite for Indonesia, and the Payload Deployment and Retrieval System (PDRS) to test the Canadian-built Remote Manipulator System (RMS), or robotic arm. Over the course of the next year, both the mission’s designation and its payload complement changed due to a shuffling of payloads among shuttle flights. The PDRS moved up to STS-8, replaced by the Westar VI communications satellite for Western Union. In addition to the two spacewalks by McCandless and Stewart to test the MMU, the mission, re-designated STS-41B in September 1983, now included the Shuttle Pallet Satellite-01A (SPAS-01A), a reflight of the German-built deployable satellite flown on STS-7 in June 1983. The mission also included practicing rendezvous maneuvers with the Integrated Rendezvous Target (IRT), an inflatable 6-foot balloon deployed from the payload bay. During their spacewalks, McCandless and Stewart planned to perform the first tests of the Manipulator Foot Restraint (MFR), a work platform attached to the end of the RMS.

Aerial view at NASA’s Kennedy Space Center (KSC) in Florida of the Vehicle Assembly Building (VAB) and the Shuttle Landing Facility, where STS-41B made the first landing of the program Workers in the VAB prepare to lift space shuttle Challenger to mate it with its External Tank and twin Solid Rocket Boosters The STS-41B crew arrives at KSC three days before launch
Left: Aerial view at NASA’s Kennedy Space Center (KSC) in Florida of the Vehicle Assembly Building (VAB) and the Shuttle Landing Facility, where STS-41B made the first landing of the program. Middle: Workers in the VAB prepare to lift space shuttle Challenger to mate it with its External Tank and twin Solid Rocket Boosters. Right: The STS-41B crew arrives at KSC three days before launch.

After its previous mission, STS-8, Challenger arrived at KSC on Sept. 9, 1983, and workers towed it to the Orbiter Processing Facility to refurbish it for STS-41B. They replaced the orbiter’s three Auxiliary Power Units following a fire during Columbia’s landing on STS-9. They towed Challenger to the Vehicle Assembly Building on Jan. 6, 1984, for mating with its External Tank and twin Solid Rocket Boosters, and rolled the completed stack to Launch Pad 39A six days later. The astronauts participated in the Terminal Countdown Demonstration Test, a dress rehearsal for the actual countdown, on Jan. 16, and senior managers held the Flight Readiness Review on Jan. 25 to confirm the Feb. 3 launch date. Engineers began the countdown on Jan. 31, the same day the crew arrived at KSC.

Liftoff of space shuttle Challenger on the STS-41B mission Congressman C. William “Bill” Nelson, left, of Florida cheers on the STS-41B launch Challenger rises into the sky
Left: Liftoff of space shuttle Challenger on the STS-41B mission. Middle: Congressman C. William “Bill” Nelson, left, of Florida cheers on the STS-41B launch. Right: Challenger rises into the sky.

Liftoff occurred on schedule at 8:00 a.m. EST, with Challenger taking its five-member crew into the skies. Among the guests on hand to view the launch, Florida Congressman C. William “Bill” Nelson, who two years later flew on Columbia’s STS-61C mission, and in 2021 became NASA’s 14th administrator. Nine minutes after liftoff, Challenger’s three main engines cut off. The astronauts had reached space and experienced weightlessness for the first time, although they had not yet achieved orbit. The shuttle’s two Orbital Maneuvering System engines fired twice to complete the insertion into a circular 190-mile-high orbit.

Astronauts Ronald E. McNair, left, and Robert L. Stewart minutes after Challenger reached orbit Deploy of the Westar VI communications satellite for Western Union Deploy of the Palapa-B2 communications satellite for Indonesia
Left: Astronauts Ronald E. McNair, left, and Robert L. Stewart minutes after Challenger reached orbit. Middle: Deploy of the Westar VI communications satellite for Western Union. Right: Deploy of the Palapa-B2 communications satellite for Indonesia.

Once in orbit, the astronauts opened Challenger’s payload bay doors, deployed the Ku-band high-gain antenna to communicate with the Tracking and Data Relay Satellite, and closed the protective sunshields around the two satellites at the back of the payload bay. They tested the cameras in the payload bay and found that the one on the forward bulkhead’s starboard side did not tilt and panned only slowly, and only provided black and white imagery. Approximately eight hours into their first day, after opening its sunshield, the astronauts deployed the Westar VI communications satellite. Although the deployment went perfectly, 45 minutes later when the satellite’s Payload Assist Module-D (PAM-D) upper stage ignited to send it to geosynchronous transfer orbit, it fired for only a few seconds, stranding the satellite in a low, elliptical, and operationally useless orbit. Mission managers decided to delay the deployment of the Palapa satellite from the mission’s second day to the fourth day since it used an identical PAM-D upper stage. This provided engineers time to determine the cause of the first PAM-D failure. In place of the delayed deployment, the astronauts began several of the mission’s experiments, including activating the SPAS, and performed an initial checkout of the spacesuits. The third flight day included two retrograde OMS burns to lower Challenger’s orbit to a circular 173-mile-high orbit, and had planned to include the rendezvous operations with the IRT. However, shortly after its deployment from the payload bay, the balloon initially failed to inflate and then exploded, leaving no suitable target for a rendezvous. Using the shuttle’s radar and star trackers, the astronauts tracked the remains of the balloon to a distance of about 63 miles before abandoning the activity. In place of the IRT rendezvous, the crew checked out the RMS, with McNair at the controls.

The Shuttle Pallet Satellite-01A (SPAS-01A) in Challenger’s payload bay Robert L. Stewart wears the launch entry helmet during a prebreathe activity prior to a spacewalk
Left: The Shuttle Pallet Satellite-01A (SPAS-01A) in Challenger’s payload bay. Right: Robert L. Stewart wears the launch entry helmet during a prebreathe activity prior to a spacewalk.

The morning of flight day four, the astronauts decreased the shuttle’s cabin pressure from 14.7 pounds per square inch (psi) to 10.2 psi. This reduced the time the two spacewalkers needed to prebreathe pure oxygen to rid their blood of excess nitrogen that could result in the bends when working in their spacesuits at 4.3 psi. The astronauts deployed the Palapa satellite, and oriented the orbiter so that cameras on the RMS could observe the firing of the PAM-D engine. The burn initially appeared to go as planned, but engineers later determined that this engine suffered the same failure as the Westar PAM-D, similarly stranding Palapa in a low, elliptical, and operationally useless orbit. As a footnote, spacewalking astronauts flying MMUs retrieved both satellites during the STS-51A mission in November 1984 and returned them to Earth for reflight.

View of Bruce McCandless during the first test flight of the Manned Maneuvering Unit View of Bruce McCandless during the first test flight of the Manned Maneuvering Unit View of Bruce McCandless during the first test flight of the Manned Maneuvering Unit View of Challenger from McCandless’ vantage point
Views of Bruce McCandless during the first test flight of the Manned Maneuvering Unit, and a view, right, of Challenger from McCandless’ vantage point.

On flight day five, McCandless and Stewart began the second spacewalk of the shuttle program. After opening the airlock hatch, McCandless checked out the MMUs, donning the port side unit, designated with a number “3,” while Stewart prepared the Trunnion Pin Attachment Device (TPAD) and the MFR for use later in the spacewalk. As he began his first test flight in the MMU, McCandless said, “that may have been one small step for Neil, but it’s a heck of a big leap for me,” humorously echoing Apollo 11 astronaut Neil A. Armstrong’s first words after stepping onto the lunar surface. As an historical footnote, McCandless has served as capsule communicator during Armstrong’s historic Moonwalk. Floating just outside the flight deck aft windows, McCandless checked out the MMU’s flying in all three axes. He next translated down the length of the payload bay before beginning his long-distance travel. He flew 150 feet away from the orbiter, with a helmet mounted camera showing the receding shuttle, returned to the spacecraft, then backed out again to 320 feet before returning to the payload bay and stowing the MMU. With McNair operating the RMS, Stewart attached the MFR to the arm’s end effector. With the astronauts running slightly behind schedule, Mission Control decided to skip Stewart’s checkout of the MFR so he could proceed to his checkout of the MMU, the same unit McCandless just finished flying. McNair maneuvered McCandless in the MFR to the the SPAS to practice activities required for the Solar Max repair mission. Meanwhile Stewart began his test of the MMU, flying out to 150 feet, stopping, flying out to 300 feet, and returning to the payload bay. Once there, he attached the TPAD to the front of the MMU and practiced docking to the trunnion pin attached to the SPAS. He then returned the MMU to its stowage location. The two astronauts ended the spacewalk after 5 hours 55 minutes.

View in Mission Control at NASA’s Johnson Space Center in Houston during the first STS-41B spacewalk
View in Mission Control at NASA’s Johnson Space Center in Houston during the first STS-41B spacewalk as Bruce McCandless makes the first flight of the Manned Maneuvering Unit.

View of Bruce McCandless testing the Manipulator Foot Restraint at the end of the Remote Manipulator System, operated by Ronald E. McNair View of Bruce McCandless testing the Manipulator Foot Restraint at the end of the Remote Manipulator System, operated by Ronald E. McNair View of Bruce McCandless testing the Manipulator Foot Restraint at the end of the Remote Manipulator System, operated by Ronald E. McNair
Three views of Bruce McCandless testing the Manipulator Foot Restraint at the end of the Remote Manipulator System, operated by Ronald E. McNair.

Robert L. Stewart begins his first test flight of the Manned Maneuvering Unit (MMU) Stewart during his flight away from the payload bay Bruce McCandless prepares to dock his MMU with the attached Trunnion Pin Attachment Device to the SPAS-01A in Challenger’s payload bay
Left: Robert L. Stewart begins his first test flight of the Manned Maneuvering Unit (MMU). Middle: Stewart during his flight away from the payload bay. Right: Bruce McCandless prepares to dock his MMU with the attached Trunnion Pin Attachment Device to the SPAS-01A in Challenger’s payload bay.

Astronaut Ronald E. McNair poses with the camera for the Cinema 360 project, wearing a humorous “Cecil B. McNair” name tag, sunglasses, and beret McNair plays the soprano saxophone while floating in the middeck
Left: Astronaut Ronald E. McNair poses with the camera for the Cinema 360 project, wearing a humorous “Cecil B. McNair” name tag, sunglasses, and beret. Right: McNair plays the soprano saxophone while floating in the middeck.

On flight day six, McCandless and Stewart busied themselves with cleaning and recharging their spacesuits for the next day’s second spacewalk. McNair, an accomplished saxophonist, took some free time to play an instrument he brought along, the first musical instrument played on the shuttle. Space limitations in the shuttle precluded McNair flying his favorite tenor sax, so he learned to play the smaller soprano version of the instrument. McNair encountered unexpected effects of weightlessness on his playing. The water that normally accumulates inside wind instruments on Earth resulted instead in unwanted “bubbly” effects. The shuttle cabin’s dry air had unplanned effects on the instrument’s felt and leather pads, requiring several minutes of “rehydration” before proper playing. The reduced cabin atmospheric pressure for the spacewalks also required special reeds and mode of playing. Another historic event on this day, the Soviet Union launched a trio of cosmonauts to their Salyut-7 space station, bringing the total number of people in space to a then record-setting eight. This prompted one of the astronauts to comment, “It’s really getting to be populated up here.”

Bruce McCandless flies the Manned Maneuvering Unit (MMU) above Challenger’s payload bay during the second spacewalk McCandless grabs the Manipulator Foot Restraint that had floated away Robert L. Stewart flies the MMU above Challenger’s payload bay
Left: Bruce McCandless flies the Manned Maneuvering Unit (MMU) above Challenger’s payload bay during the second spacewalk. Middle: McCandless grabs the Manipulator Foot Restraint that had floated away. Right: Robert L. Stewart flies the MMU above Challenger’s payload bay.

On the seventh flight day, when Gibson began to operate the RMS, it did not respond as expected due to a failure in its wrist joint, and Mission Control requested that he stow it. Without the RMS, McCandless and Stewart could not practice docking with a slowly rotating SPAS, a critical test for the Solar Max mission. Instead, they practiced docking with the satellite berthed in the payload bay. McCandless placed himself in the starboard MMU, designated with a “2,” attached the TPAD, and practiced dockings before returning the MMU to its stowage location. Meanwhile, Stewart recharged the port MMU’s nitrogen tanks and took flight to practice dockings with the TPAD to the SPAS. He then returned the MMU to its portside location. At one point during the spacewalk, the MFR got loose and began drifting away. In an impromptu demonstration of rescuing an untethered astronaut, Brand maneuvered the orbiter so McCandless could retrieve it. McCandless donned the portside MMU to conduct evaluations of its automatic attitude hold and translation and rotational acceleration capabilities. In the meantime, Stewart practiced a hydrazine transfer operation using red-dyed freon as a substitute for the hazardous fuel. President Ronald W. Reagan called the astronauts during the spacewalk to congratulate them. McCandless returned the MMU to the port station while Stewart put away the fuel transfer equipment and tools. They climbed back into the airlock to close out the 6-hour 17-minute spacewalk, the longest of the shuttle program up to that time. Shortly after, the astronauts removed their spacesuits, exited the airlock, and repressurized Challenger’s cabin to 14.7 psi.

The STS-41B crew members pose near the end of their successful mission, in the middeck The STS-41B crew members pose near the end of their successful mission on the flight deck
The STS-41B crew members pose near the end of their successful mission, in the middeck, left, and on the flight deck, right.

On flight day eight, the day before entry, the astronauts busied themselves with stowing equipment. Brand and Gibson tested Challenger’s reaction control system thrusters and flight control surfaces in preparation for the next day’s landing. They held a 30-minute press conference with reporters on the ground asking them questions about their mission, with special emphasis on the historic spacewalks.

The astronauts close the payload bay doors at the end of the STS-41B mission Orange glow outside the windows during Challenger’s reentry A chase plane photographs Challenger during its descent to NASA’s Kennedy Space Center in Florida
Left: The astronauts close the payload bay doors at the end of the STS-41B mission. Middle: Orange glow outside the windows during Challenger’s reentry. Right: A chase plane photographs Challenger during its descent to NASA’s Kennedy Space Center in Florida.

Space shuttle Challenger touches down on the Shuttle Landing Facility at NASA’s Kennedy Space Center in Florida
Space shuttle Challenger touches down on the Shuttle Landing Facility at NASA’s Kennedy Space Center in Florida.

Space shuttle Challenger rolls down the Shuttle Landing Facility (SLF) at NASA’s Kennedy Space Center (KSC) in Florida STS-41B astronauts depart space shuttle Challenger at the SLF A welcome home ceremony for the STS-41B crew at the KSC Visitor Center
Left: Space shuttle Challenger rolls down the Shuttle Landing Facility (SLF) at NASA’s Kennedy Space Center (KSC) in Florida. Middle: STS-41B astronauts depart space shuttle Challenger at the SLF. Right: A welcome home ceremony for the STS-41B crew at the KSC Visitor Center.

On entry day, Feb. 11, the astronauts opened the two sunshields that protected the two satellites before their deployments, retracted and stowed the Ku antenna, and closed the payload bay doors. Brand and Gibson oriented Challenger with its tail in the direction of flight and fired its two OMS engines to slow the spacecraft enough to drop it out of orbit. They reoriented the orbiter to fly with its heat shield exposed to the direction of flight as it entered Earth’s atmosphere. The buildup of ionized gases caused by the heat of reentry prevented communications for about 15 minutes. The shuttle’s reentry path took it over the U.S. Gulf coast as it traveled toward the Shuttle Landing Facility at KSC. At an altitude of 110,000 feet and traveling at Mach 4.3, Challenger crossed Florida’s west coast, carrying out roll reversal maneuvers to reduce its speed. As the shuttle went subsonic, it made its final turn onto the KSC runway. Gibson lowered Challenger’s landing gear and Brand brought the shuttle down for its first landing at KSC, just a few miles from where it launched 7 days 23 hours 16 minutes earlier.

Enjoy the crew narrated video of the STS-41B mission. Read Brand’s and Gibson’s recollections of the STS-41B mission in their oral histories with the JSC History Office.

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By European Space Agency
      Image: Getting Proba-3 fit for flight View the full article
    • By NASA
      2 min read
      Preparations for Next Moonwalk Simulations Underway (and Underwater)
      NASA/Quincy Eggert The design and build of a unique NASA pod, produced to advance computer vision for autonomous aviation, was recently completed in-house at NASA’s Armstrong Flight Research Center in Edwards, California, by using the center’s unique fabrication capabilities. The pod is called the NASA Airborne Instrumentation for Real-world Video of Urban Environments (AIRVUE). NASA Armstrong can take an idea from a drawing to flight with help from the center’s Experimental Fabrication Shop.  
      NASA researcher James Cowart adds the top back onto the NASA Airborne Instrumentation for Real-world Video of Urban Environments (AIRVUE) sensor pod at NASA’s Armstrong Flight Research Center in Edwards, California, in late February 2024. The pod houses sensors, wiring and cameras. The AIRVUE pod was flown on a helicopter at NASA’s Kennedy Space Center in Florida and is used to collect data for future autonomous aircraft.NASA/Genaro Vavuris NASA subject matter experts developed the idea for the project, after which engineers drew up plans and selected materials. The Experimental Fabrication Shop received those plans and gathered the materials to fabricate the pod.  
      After the pod was built, it moved to NASA Armstrong’s Engineering Support Branch, where electronics technicians and other specialists installed instruments inside of it. Once completed, the pod went through a series of tests at NASA Armstrong to make sure it was safe to fly at NASA’s Kennedy Space Center in Florida on an Airbus H135 helicopter. The engineering team made final adjustments to ensure the pod would collect the correct data prior to installation. More about the design and fabrication process, and the pod’s capabilities, is available to view in a NASA video.
      NASA researchers James Cowart and Elizabeth Nail add sensors, wiring and cameras, to the NASA Airborne Instrumentation for Real-world Video of Urban Environments (AIRVUE) sensor pod at NASA’s Armstrong Flight Research Center in Edwards, California, in late February 2024. The AIRVUE pod was flown on a helicopter at NASA’s Kennedy Space Center in Florida and is used to collect data for future autonomous aircraft.NASA/Genaro Vavuris Share
      Details
      Last Updated Nov 12, 2024 EditorDede DiniusContactTeresa Whitingteresa.whiting@nasa.gov Related Terms
      Advanced Air Mobility Aeronautics Ames Research Center Armstrong Flight Research Center Drones & You Glenn Research Center Kennedy Space Center Langley Research Center Explore More
      5 min read NASA Funds New Studies Looking at Future of Sustainable Aircraft
      Article 31 mins ago 4 min read Interview with OCEANOS Instructor María Fernanda Barbarena-Arias
      Article 1 day ago 3 min read Interview with OCEANOS Instructor Samuel Suleiman
      Article 1 day ago Keep Exploring Discover More Topics From NASA
      Armstrong Flight Research Center
      Aeronautics
      Advanced Air Mobility Mission
      NASA’s Advanced Air Mobility (AAM) research will transform our communities by bringing the movement of people and goods off the ground, on…
      Armstrong Capabilities & Facilities
      View the full article
    • By NASA
      Dr. Annie Meier (second from left) and her team inside the Applied Chemistry Lab at NASA’s Kennedy Space Center in Florida began supplementing their normal workload in mid-2023 with efforts to improve the lab’s sustainable practices. In 2024, the laboratory became the first at NASA to receive certification from the non-profit My Green Lab for its efforts in sustainability.NASA/Kim Shiflett NASA’s Kennedy Space Center in Florida has a long record of achievements in sustainability and recently added another to the list when the spaceport’s Applied Chemistry Lab became the first in the agency to be certified for its environmentally conscious practices.
      The My Green Lab Certification recognizes sustainability best practices in research facilities around the world. The certification program run by My Green Lab, a non-profit dedicated to creating a culture of sustainability through science, is considered a key measure of progress towards a zero-carbon future by the United Nations Race to Zero campaign.
      “When I heard our lab achieved certification, I was so happy,” said Dr. Annie Meier, one of the laboratory’s chemical engineers. “It meant we could now make a conscious effort to share these green practices with all who work in our lab. We even added them to our training materials for new and incoming members in the lab.”
      The lab performs research and technology development for a wide range of chemistry and engineering-related applications to solve the unique operational needs of NASA and outside partners. The lab primarily focuses on in-situ resource utilization and addressing technology gaps related to lunar and Martian sustainability. The lab’s scientists also provide expertise in the fields of logistics reduction, plasma science, hypergolic fuels, analytical instrumentation, and gas analysis.
      While sustainability has long been a focus of the lab, the journey to the certification began when Riley Yager, a doctoral student from University of Alabama at Birmingham – where Meier was a technical monitor – shared her knowledge of the program after pursuing green lab practices at her university.
      “I work as a sustainability ambassador at my university, so I knew of this program,” Yager said. “Sustainable practices are something woven into my everyday life, so naturally I wanted to bring those practices into my lab environments.”
      After learning about the program from Yager and discovering the many other academic institutions and companies certified globally, Meier submitted a proposal to NASA and obtained funding to pursue certification for the Applied Chemistry Lab.
      After a kickoff event hosted by My Green Lab in April 2023, the lab’s path to certification began with a self-assessment survey, in which members of the lab answered a series of questions about their practices in areas such as cold storage, green chemistry, infrastructure energy, resource management, waste reduction, and water. My Green Lab collected and analyzed the answers, providing a baseline assessment and recommendations to improve the lab’s sustainable practices.
      “We took their initial survey and learned we had lots of room for improvements as a lab,” Meier said. “Then I worked with a few interns over the summer to spearhead the ‘green team’ to implement changes and get momentum from the entire lab.”
      The lab began with minimizing purchases by improving efficiencies during the inventory process. The team also performed a waste audit of all seven of its laboratories. They adopted nitrile glove and pipette tip box recycling, reviewed the “12 principles of green chemistry” with the lab members, and installed stickers and signage about what can and cannot be unplugged to save energy. Additionally, they installed low-flow aerators on the lab tap sinks to reduce flow, and the lab now uses a recycling sink to save on water or solvents for cleaning parts.
      As luck would have it, Yager ended up working at the Applied Chemistry Lab on a NASA fellowship and became a member of the green team.
      “It was really fun to see that come full circle,” Meier said. “Almost all members of the lab, from our fellows to most senior members, used their self-motivation to get on the sustainability train.”
      The green team continued to grow as the lab implemented changes to become more sustainable. Just over six months after the kickoff event, they completed another assessment survey. With possible certification levels of bronze, silver, gold, platinum, and green – the level that adheres closest to My Green Lab’s highest standards – the ACL was certified green, marking the first time any NASA center obtained a My Green Lab Certification.
      “Our lab is looking to sustain these green practices and achieve the same status when we are reassessed in the future,” Meier said. “This effort could be a wonderful catalyst to inspire other work groups to lean towards more ‘green’ practices at the frontline in our laboratories.”
      The NASA Kennedy lab joined over 2,500 labs in a range of sectors that received the My Green Lab certification. Maintaining the distinction will require recertification every two years.
      View the full article
    • By NASA
      Successfully deployed from the space shuttle Challenger during the February 1984 STS-41B mission, the Westar 6 and Palapa B2 communications satellites ended up in incorrect orbits due to failures of their upper stage rockets. During STS-51A in November 1984, Discovery’s second trip into space, the crew of Commander Frederick H. “Rick” Hauck, Pilot David M. Walker, and Mission Specialists Joseph P. Allen, Anna L. Fisher, and Dale A. Gardner worked as a team to not only deploy two new satellites but also to retrieve the two wayward but otherwise healthy satellites for return to Earth. Hauck and Walker piloted Discovery to rendezvous with each satellite in turn, Allen and Gardner retrieved them during two spacewalks, and Fisher grappled and placed them in the payload bay for return to Earth. After refurbishment, both satellites returned to space.

      Left: The STS-51A crew of Dale A. Gardner, left, David M. Walker, Anna L. Fisher, Frederick “Rick” H. Hauck, and Joseph P. Allen. Right: The STS-51A crew patch.
      NASA originally designated Hauck, Walker, Allen, Fisher, and Gardner as a crew in November 1983 and assigned them to STS-41H, a mission aboard Challenger planned for late September 1984 to either deploy the second Tracking and Data Relay Satellite (TDRS) or fly a classified payload for the Department of Defense. Due to ongoing problems with the Inertial Upper Stage that failed to put the first TDRS satellite in its correct orbit during STS-6, NASA canceled STS-41H and shifted Hauck’s crew to STS-51A. In February 1984, an agreement between NASA and the Canadian government added an as-yet unnamed Canadian payload specialist to the STS-51A crew. Managers later named the Canadian as Marc Garneau and reassigned him to STS-41G.
      A shuffling of payloads following the STS-41D launch abort resulted in STS-51A now deploying the Anik D2 satellite for Canada and Leasat 1 (also known as Syncom IV-1) for the U.S. Navy. By early August, the launch date had slipped to Nov. 2, with NASA considering the possibility of retrieving the two wayward satellites from STS-41B, officially adding that task on Aug. 13. NASA selected Allen in 1967 as one of 11 scientist-astronauts, while the rest of the crew hail from the Class of 1978. Hauck, on his second mission after serving as pilot on STS-7, has the distinction as the first from his class to command a shuttle mission. Allen and Gardner had each flown one previous mission, STS-5 and STS-8, respectively, while for Walker and Fisher STS-51A represented their first flight. Fisher has the distinction as the first mother in space. 

      Left: After its arrival from the Orbiter Processing Facility, workers in the Vehicle Assembly Building (VAB) prepare to lift Discovery for mating with an External Tank (ET) and Solid Rocket Boosters (SRBs). Middle: Workers lift Discovery to stack it with the ET and SRBs. Right: The completed stack prepares to leave the VAB for the rollout to Launch Pad 39A.
      Discovery arrived back at NASA’s Kennedy Space Center (KSC) in Florida on Sept. 10, returning from Edwards Air Force Base in California following the STS-41D mission. Workers towed it to the Orbiter Processing Facility (OPF) the next day to begin the process of refurbishing it for STS-51A. On Oct. 18, they rolled it over to the Vehicle Assembly Building (VAB), for stacking with an External Tank and twin Solid Rocket Boosters.

      At NASA’s Kennedy Space Center in Florida, space shuttle Discovery rolls out to Launch Pad 39A, with the Saturn V rocket on display in the foreground.
      The completed stack rolled out to Launch Pad 39A on Oct. 23. Two days later, the five-member STS-51A crew participated in the Terminal Countdown Demonstration Test, essentially a dress rehearsal for the actual countdown to launch. The crew returned to KSC on Nov. 5, the day the countdown began for a planned Nov. 7 launch. High upper-level winds that day forced a one-day delay.

      Left: STS-51A astronaut Dale A. Gardner trains for the capture of a satellite using the Apogee Kick Motor Capture Device. Middle: Astronaut Anna L. Fisher trains to use the Canadian-built Remote Manipulator System, or robotic arm. Right: As part of the Terminal Countdown Demonstration Test, the STS-51A astronauts practice rapid evacuation from the launch pad.
      Following deployment from Challenger during STS-41B, the upper stages of both the Westar 6 and Palapa B2 satellites malfunctioned, leaving them in non-useable 160-by-600-mile-high orbits instead of the intended 22,300-mile-high geostationary orbits required for their normal operations. While both satellites remained healthy, their own thrusters could not boost them to the proper orbits. NASA devised a plan to have astronauts retrieve the satellites during spacewalks using the jetpack known as the Manned Maneuvering Unit (MMU), after which the shuttle’s Canadian-built Remote Manipulator System (RMS) or robot arm would grapple them and place them into the cargo bay for return to Earth. Astronauts had demonstrated the capability of the MMU during the STS-41C Solar Max satellite repair mission in April 1984 and NASA felt confident of its ability to capture and return Westar and Palapa. 
      In the weeks prior to STS-51A, ground controllers lowered the orbits of both satellites and reduced their spin rates from 50 to 1 rpm to enable capture by the shuttle astronauts. Engineers at NASA’s Johnson Space Center in Houston developed the Apogee Kick Motor Capture Device (ACD), otherwise known as the stinger due to its appearance, to allow an astronaut to capture the satellites while flying the MMU. Once relocated over the payload bay, a second astronaut would remove the satellite’s omnidirectional antenna with pruning shears and install an Antenna Bridge Structure (ABS) with a grapple fixture over the satellite’s main antenna dish. Allen would fly the MMU to capture Palapa, then he would switch roles with Gardner who would capture Westar. Fisher would use the RMS to grapple the satellites by this second fixture and lower them into specially built cradles to secure them into the payload bay.

      Left: The STS-51A crew leaves crew quarters on their way to Launch Pad 39A. Middle: Liftoff of Discovery on the STS-51A mission. Right: View inside Discovery’s payload bay shortly after orbital insertion – the top of Anik D2 is visible, with Leasat 1 hidden behind it.
      Space shuttle Discovery roared off KSC’s Launch Pad 39A on Nov. 8, 1984, to begin the STS-51A mission and mark the orbiter’s first return to space. For Gardner, launch day coincided with his 36th birthday. The launch took place just 26 days after the landing of the previous mission, STS-41G, a then record-breaking turnaround time between shuttle flights. Eight and a half minutes after liftoff, Discovery and its five-member crew reached space and shortly thereafter settled into a 182-by-172-mile-high initial orbit. As their first order of business, the crew checked out the RMS to ensure its functionality for the satellite captures later in the mission. They also performed the first rendezvous burn to begin the approach to the Palapa satellite. The crew then settled down for its first night’s sleep in orbit.

      Left: Nighttime deploy of the Anik D2 satellite. Middle: Deploy of the Leasat 1 satellite. Right: Leasat 1 as it departs from Discovery.
      The primary activity of the second flight day involved Allen deploying the 2,727-pound Anik D2 satellite via a spring ejection mechanism, occurring on time and with no issues. The crew also circularized the shuttle’s orbit at 186 miles. The next day, Gardner deployed the 17,000-pound Leasat 1 using the Frisbee style mechanism used to deploy the first Leasat during STS-41D two months earlier. With the satellite deployments complete, the crew began to focus on the rendezvous maneuvers to bring them close to the Palapa B2 satellite while Allen and Gardner verified the functionality of their spacesuits. On flight day 4, the astronauts reduced the pressure inside the shuttle from 14.7 pounds per square inch (psi) to 10.2 psi in order to prevent the spacewalking astronauts from developing the bends inside the spacesuits that operated at 4.3 psi.

      Left: During the first spacewalk, Jospeh P. Allen captures the Palapa B2 satellite. Middle: Anna L. Fisher grasps Allen and Palapa with the Remote Manipulator System, or robotic arm. Right: Allen, left, and Dale A. Gardner prepare to place Palapa in its cradle in the payload bay.
      On the fifth mission day, after Hauck and Walker piloted Discovery to within 35 feet of Palapa, Allen and Gardner exited the airlock to begin the spacewalk portion of the satellite capture. Allen donned the MMU mounted on the side wall of the cargo bay, attached the stinger to its arms, and flew out to Palapa. Once there, he inserted the stinger into the satellite’s Apogee Kick Motor bell and using the MMU’s attitude control system stopped Palapa’s spin.
      Fisher then steered the RMS to capture a grapple fixture mounted on the stinger between Allen and the satellite. She then maneuvered them over the payload bay where Gardner waited to remove its omnidirectional antenna and install the bridge structure. However, Gardner could not attach the ABS to the satellite due to an unexpected clearance issue on the satellite. Using a backup plan, Allen undocked from the stinger, leaving it attached to the satellite as well as the RMS, and stowed the MMU in the payload bay. With Allen now holding the satellite by its antenna, Gardner attached an adaptor to the bottom end of the satellite to secure it in its cradle in the payload bay. This plan worked and Allen and Gardner completed the spacewalk in exactly six hours.

      Left: Dale A. Gardner flies the Manned Maneuvering Unit to capture Westar 6 during the second spacewalk. Middle: Anna L. Fisher operates the Remote Manipulator System from Discovery’s aft flight deck. Right: Gardner, left, and Joseph P. Allen maneuver Westar prior to placing it in its cradle in the payload bay.
      Between the two spacewalk days, the crew serviced the spacesuits, conducted routine maintenance on the shuttle, and prepared for the second rendezvous, this time to retrieve Westar. Allen and Gardner switched roles for the second spacewalk on flight day seven, with Gardner flying the MMU to capture Westar. The astronauts repeated the procedure from the first spacewalk, except for not removing the omni antenna so they could use it as a handhold. With Westar secured in the payload bay, Gardner and Allen completed the second spacewalk in 5 hours and 42 minutes.

      Left: Dale A. Gardner, left, and Joseph P. Allen pose at the end of the Remote Manipulator System controlled by Anna L. Fisher, holding a For Sale sign above the two retrieved satellites secured in Discovery’s payload bay. Middle: Inflight photo of the STS-51A crew after the successful satellite retrievals. Right: View inside Discovery’s payload bay shortly before the deorbit burn, with Westar 6 in the foreground and Palapa B2 behind it.
      During their final full day in space, Discovery’s crew repressurized the shuttle’s cabin to 14.7 psi and tidied the cabin in preparation for reentry. On Nov. 16, the astronauts closed the payload bay doors and fired the Orbital Maneuvering System engines to begin the descent back to Earth. Hauck guided Discovery to a smooth landing at KSC, completing a flight of 7 days, 23 hours, and 45 minutes. The crew had traveled nearly 3.3 million miles and completed 127 orbits around the Earth. The next day, workers towed Discovery to the OPF to begin preparing it for its next flight, STS-51C in January 1985.

      Left: Discovery streaks over Houston on its way to land at NASA’s Kennedy Space Center (KSC) in Florida. Middle: Discovery moments before touchdown at KSC. Right: NASA officials greet the STS-51A astronauts as they exit Discovery.
      As a postscript, STS-51A marked the last flight to use the MMUs, and the last untethered spacewalks until 1994 when STS-64 astronauts tested the Simplified Aid for EVA Rescue (SAFER). All subsequent spacewalks on the space shuttle and the International Space Station used safety tethers, with the SAFER as a backup in case a crew member disconnects from the vehicle.

      Left: In the Orbiter Processing Facility at NASA’s Kennedy Space Center in Florida, workers inspect the Westar 6, left, and Palapa B2 satellites in Discovery’s payload bay. Right: The STS-51A crew, with Lloyd’s of London representative Stephen Merritt, sitting at right, during their visit to London.
      On Dec. 7, 1984, in a ceremony at the White House, President Ronald W. Reagan presented the STS-51A crew with the Lloyd’s of London – the company had insured the two satellites they returned to Earth – Silver Medal for Meritorious Salvage Operations. Fisher has the distinction as only the second woman to receive that award. In February 1985, Lloyd’s flew the crew to London on the Concorde for a week of activities, including addressing the Lloyd’s underwriters and tea with Prince Charles at Kensington Palace.
      Hong Kong-based AsiaSat purchased the Westar 6 satellite, refurbished it, and relaunched it as AsiaSat 1 on April 7, 1990, on a Chinese CZ-3 rocket. Title to the Palapa B2 satellite returned to Indonesia after its relaunch as Palapa B2R on April 13, 1990, aboard a Delta rocket.
      Read recollections of the STS-51A mission by Hauck, Allen, and Fisher in their oral histories with the JSC History Office. Enjoy the crew’s narration of a video about the STS-51A mission.
      Explore More
      1 min read Oral History with Jon A. McBride, 1943 – 2024
      Article 18 hours ago 9 min read 30 Years Ago: STS-66, the ATLAS-3 Mission to Study the Earth’s Atmosphere
      Article 4 days ago 3 min read Halloween on the International Space Station
      Article 1 week ago View the full article
    • By SpaceX
      Starship | Fifth Flight Test
  • Check out these Videos

×
×
  • Create New...