Members Can Post Anonymously On This Site
February’s Night Sky Notes: Constant Companions: Circumpolar Constellations, Part I
-
Similar Topics
-
By NASA
2 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater)
The public is invited to celebrate International Observe the Moon Night on Saturday, Sept. 14, from 6 to 9 p.m. EDT at NASA Goddard’s Visitor Center in Greenbelt, Maryland.
International Observe the Moon Night is a time to come together with fellow Moon enthusiasts and curious people around the world. The public is invited to learn about lunar science and exploration, take part in celestial observations, and honor cultural and personal connections to the Moon.
Save the date! International Observe the Moon Night is September 14, 2024!NASA During the Goddard event, attendees will be able to participate in a variety of interactive hands-on activities. There will also be a photo booth, Moon-themed presentations, and lunar and astronomical observing with telescopes.
This free event is open to the public and will occur rain or shine.
International Observe the Moon Night occurs annually in September or October, when the Moon is around first quarter – a great phase for evening observing. Last year, almost a million people participated in 123 countries and all 7 continents. This year, NASA is celebrating 15 years of the program!
International Observe the Moon Night is sponsored by NASA’s LRO (Lunar Reconnaissance Orbiter) mission and the Solar System Exploration Division of NASA’s Goddard Space Flight Center, with support from many partners. LRO is managed by Goddard for the Science Mission Directorate at NASA Headquarters in Washington.
No registration is needed.
To participate in International Observe the Moon Night from wherever you may be, tune into our NASA+ broadcast or watch live streams of the Moon from telescopes around the world on our Live Streams page on Sept. 14: https://moon.nasa.gov/observe-the-moon-night/participate/live-streams/.
For directions to the Goddard Visitor Center, go to:
https://www.nasa.gov/centers/goddard/visitor/directions/index.html
To learn more about the program, visit:
https://moon.nasa.gov/observe-the-moon-night
For more information about LRO, visit:
https://science.nasa.gov/mission/lro
Share
Details
Last Updated Sep 09, 2024 EditorWilliam SteigerwaldContactNancy N. Jonesnancy.n.jones@nasa.govLocationGoddard Space Flight Center Related Terms
Earth's Moon Lunar Reconnaissance Orbiter (LRO) Explore More
2 min read Artemis IV: Gateway Gadget Fuels Deep Space Dining
Learn about the handy device NASA is developing to help astronauts rehydrate their meals aboard…
Article 4 days ago 2 min read Gateway: Energizing Exploration
Discover the cutting-edge technology powering Gateway, humanity's first lunar space station.
Article 3 weeks ago 4 min read Super Blue Moons: Your Questions Answered
The Moon of August 30-31, 2023, is a full moon, a supermoon, and a blue…
Article 3 weeks ago View the full article
-
By NASA
NASA’s Advanced Composite Solar Sail System is seen orbiting Earth in this 13-second exposure photograph, Monday, Sept. 2, 2024, from Arlington, Virginia. The mission team confirmed the spacecraft’s unique composite boom system unfurled its reflective sail on Thursday, Aug. 29, 2024, accomplishing a critical milestone in the agency’s demonstration of next-generation solar sail technology that will allow small spacecraft to “sail on sunlight.” Just as a sailboat is powered by wind in a sail, a spacecraft can use the pressure of sunlight on a solar sail for propulsion. This technology demonstration serves as a pathfinder for future missions powered by solar sail technology.NASA/Bill Ingalls Now that its reflective sail has deployed fully open in orbit, the Advanced Composite Solar Sail System can be seen in the night sky from many locations across the world!
Stargazers can join NASA’s #SpotTheSail campaign by using the NASA app on mobile platforms to find out when the spacecraft will be visible at their location. The app, which is free to use and available on iOS and Android, provides a location-specific schedule of upcoming sighting opportunities. A built-in augmented reality tool points users to the location of the spacecraft in real time.
Can you spot the solar sail? Share your viewing experience online using the hashtag #SpotTheSail for a chance to be featured on NASA’s website and social media channels.
Here’s how to use the sighting prediction tool:
Install and open the NASA app on an iOS or Android device. Tap on the “Featured” tab on the bottom navigation bar. Tap on the Advanced Composite Solar Sail System mission from the Featured Missions at the top of the screen. Tap on the “Sightings” tab on the bottom navigation bar. A list of all the upcoming sightings for your location will be displayed. If you are using an iOS device, you can tap on the “Sky View” link for an augmented reality guide to help you locate the spacecraft’s real-time location during the visible pass. NASA’s Advanced Composite Solar Sail System is testing new technologies in low Earth orbit, including a composite boom system that supports a four-piece sail. Not to be confused with solar panels, solar sails allow small spacecraft to “sail on sunlight,” eliminating the need for rocket fuel or other conventional propellants. This propulsion technology can enable low-cost deep space missions to increase access to space.
For ongoing mission updates, follow us on social media:
X: @NASAAmes, @NASA
Facebook: NASA Ames, NASA
Instagram: @NASAAmes, @NASA
NASA’s Ames Research Center in California’s Silicon Valley manages the Advanced Composite Solar Sail System project and designed and built the onboard camera diagnostic system. NASA’s Langley Research Center in Hampton, Virginia, designed and built the deployable composite booms and solar sail system. NASA’s Small Spacecraft Technology program office based at NASA Ames and led by the agency’s Space Technology Mission Directorate (STMD) in Washington, funds and manages the mission. NASA STMD’s Game Changing Development program developed the deployable composite boom technology. Rocket Lab USA, Inc of Long Beach, California, provided launch services. NanoAvionics provided the spacecraft bus.
View the full article
-
-
By NASA
NASA research mathematician Katherine Johnson is photographed at her desk at NASA Langley Research Center with a globe, or “Celestial Training Device,” in 1962. Credit: NASA / Langley Research Center NASA Administrator Bill Nelson will represent the agency during a Congressional Gold Medal ceremony at 3 p.m. EDT Wednesday, Sept. 18, recognizing the women who contributed to the space race, including the NASA mathematicians who helped land the first astronauts on the Moon under the agency’s Apollo Program.
Hosted by House Speaker Mike Johnson, the Congressional Gold Medal Ceremony will take place inside Emancipation Hall at the U.S. Capitol in Washington. Nelson is expected to be among the speakers.
The event will stream live on the speaker’s YouTube channel. The agency will share a direct link on this advisory in advance of the event.
Media without current congressional credentials on the Hill interested in participating in the event must RSVP by Sept. 13, to Abby Ronson at: abby.ronson@mail.house.gov.
Medal Information
Introduced by Rep. Eddie Bernice Johnson on Feb. 27, 2019, H.R.1396 – Hidden Figures Congressional Gold Medal Act – was signed into law later that year. Awards will include:
Congressional Gold Medal to Katherine Johnson, in recognition of her service to the United States as a mathematician Congressional Gold Medal to Dr. Christine Darden, for her service to the United States as an aeronautical engineer Congressional Gold Medals in commemoration of the lives of Dorothy Vaughan and Mary Jackson, in recognition of their service to the United States during the space race Congressional Gold Medal in recognition of all the women who served as computers, mathematicians, and engineers at the National Advisory Committee for Aeronautics and NASA between the 1930s and the 1970s. For more information about NASA missions, visit:
https://www.nasa.gov
-end-
Meira Bernstein / Cheryl Warner
Headquarters, Washington
202-358-1600
meira.b.bernstein@nasa.gov / cheryl.m.warner@nasa.gov
View the full article
-
By European Space Agency
Image: ESA’s Metal 3D Printer has produced the first metal part ever created in space.
The technology demonstrator, built by Airbus and its partners, was launched to the International Space Station at the start of this year, where ESA astronaut Andreas Mogensen installed the payload in the European Drawer Rack of ESA’s Columbus module. In August, the printer successfully printed the first 3D metal shape in space.
This product, along with three others planned during the rest of the experiment, will return to Earth for quality analysis: two of the samples will go to ESA’s technical heart in the Netherlands (ESTEC), another will go to ESA’s astronaut training centre in Cologne (EAC) for use in the LUNA facility, and the fourth will go to the Technical University of Denmark (DTU).
As exploration of the Moon and Mars will increase mission duration and distance from Earth, resupplying spacecraft will be more challenging. Additive manufacturing in space will give autonomy for the mission and its crew, providing a solution to manufacture needed parts, to repair equipment or construct dedicated tools, on demand during the mission, rather than relying on resupplies and redundancies.
ESA’s technology demonstrator is the first to successfully print a metal component in microgravity conditions. In the past, the International Space Station has hosted plastic 3D printers.
View the full article
-
-
Check out these Videos
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.