Jump to content

NASA’s GUSTO Prepares to Map Space Between the Stars


NASA

Recommended Posts

  • Publishers

6 min read

NASA’s GUSTO Prepares to Map Space Between the Stars

GUSTO's star trackers being calibrated while the payload is suspended by crane payload suspended by crane
 The GUSTO telescope hangs from the hangar crane during telescope pointing tests at the Long Duration Balloon Facility on the Ross Ice Shelf near the U.S. National Science Foundation’s McMurdo Station, Antarctica, on Dec. 6, 2023. Mission specialists were calibrating the star cameras, used to determine the direction of pointing of the telescope.
Credit: José Silva on behalf of the GUSTO Team

On a vast ice sheet in Antarctica, scientists and engineers are preparing a NASA experiment called GUSTO to explore the universe on a balloon. GUSTO will launch from the Ross Ice Shelf, near the U.S. National Science Foundation’s McMurdo Station research base, no earlier than Dec. 21.

GUSTO, which stands for Galactic/Extragalactic ULDB Spectroscopic Terahertz Observatory, will peer into the space between stars called the interstellar medium. The balloon-borne telescope will help scientists make a 3D map of a large part of the Milky Way in extremely high-frequency radio waves. Examining a 100-square-degree area, GUSTO will explore the many phases of the interstellar medium and the abundances of key chemical elements in the galaxy.

By studying the LMC and comparing it to the Milky Way, we’ll be able to understand how galaxies evolve from the early universe until now.

Chris Walker

Chris Walker

GUSTO principal investigator

In particular, GUSTO will scan the interstellar medium for carbon, oxygen, and nitrogen because they are critical for life on Earth. These elements can also help scientists disentangle the complex web of processes that sculpt the interstellar medium.  

While our galaxy brims with billions of stars, including our Sun, that are interesting in their own right, the space between them holds a wealth of clues about how stars and planets are born.

The interstellar medium is where diffuse, cold gas and dust accumulate into gigantic cosmic structures called molecular clouds, which, under the right conditions, can collapse to form new stars. From the swirling disk of material around the young star, planets can form.

GUSTO is unique in its ability to examine the first part of this process, “to understand how these clouds form in the first place,” Chris Walker, principal investigator of GUSTO at the University of Arizona, said. GUSTO is a collaboration between NASA, the University of Arizona, Johns Hopkins Applied Physics Laboratory (APL), and the Netherlands Institute for Space Research (SRON); as well as MIT, JPL, the Smithsonian Astrophysical Observatory, and others.

Flipping GUSTO from horizontal to vertical
The GUSTO telescope is seen on Nov. 9, 2023, as Colombia Scientific Balloon Facility personnel assist the GUSTO team in flipping the observatory from a horizontal position to a vertical position. The photo was taken at the Long Duration Balloon Facility on the Ross Ice Shelf near the U.S. National Science Foundation’s McMurdo Station, Antarctica.
Credit: José Silva on behalf of the GUSTO Team

Eventually, when massive stars die and explode as supernovae, massive shock waves ripple through molecular clouds, which can in turn lead to more stars being born, or simply destroy the clouds. GUSTO can also look at this end stage of the molecular clouds.

GUSTO functions as a cosmic radio, equipped to “listen” for particular cosmic ingredients. That’s because it senses the high-frequency signals that atoms and molecules transmit. The “T” in GUSTO stands for “terahertz” – that’s about a thousand times higher than the frequencies that cellphones operate at.

“We basically have this radio system that we built that we can turn the knob and tune to the frequency of those lines,” Walker said. “And if we hear something, we know it’s them. We know it’s those atoms and molecules.”

As the telescope moves across the sky, scientists will use it to map the intensity and velocities of the signals from particular atoms and molecules at each position. “Then we can go back and connect the dots and create an image that looks like a photograph of what the emission looks like,” Walker said.

Observations like these can’t be done for carbon, nitrogen, and oxygen from Earth-based telescopes because of the water vapor in our atmosphere absorbing the light from the atoms and molecules in question, interfering with measurements. On a balloon about 120,000 feet above the ground, GUSTO will fly above most of that water vapor. “For the type of science we do, it’s as good as being in space,” Walker said.

The GUSTO telescope will also reveal the 3D structure of the Large Magellanic Cloud, or LMC, a dwarf galaxy near our Milky Way. The LMC resembles some of the galaxies of the early universe that NASA’s James Webb Space Telescope is exploring. But since the LMC is much closer than the distant early galaxies, scientists can examine it in greater detail with GUSTO.

“By studying the LMC and comparing it to the Milky Way, we’ll be able to understand how galaxies evolve from the early universe until now,” Walker explained.

GUSTO is expected to fly for at least 55 days on a 39 million cubic-foot zero-pressure balloon, a type of balloon that can fly high for long periods of time in the Austral Summer over Antarctica and has the diameter of a football field as it floats.

LDBF sign at McMurdo
GUSTO team member José Silva, Ph.D. student at the Netherlands Institute for Space Research (SRON), stands next to the Long Duration Balloon Facility sign on the Ross Ice Shelf, 8 miles from the U.S. National Science Foundation’s McMurdo Station, Antarctica, on Nov. 9, 2023.
Credit: Geoffrey Palo on behalf of the GUSTO Team

Antarctica provides an ideal launch location for GUSTO. During the southern hemisphere’s summer, the continent gets constant sunlight, so a scientific balloon can be extra stable there. Plus, the atmospheric zone around the South Pole generates cold rotating air – creating a phenomenon called an anticyclone, which enables balloons to fly in circles without disturbance.

“Missions will fly in circles around the South Pole for days or weeks at a time, which is really valuable to the science community,” said Andrew Hamilton, chief of the NASA Balloon Program Office at the Wallops Flight Facility in Virginia. “The longer they have for observation, the more science they can get. 

GUSTO is the first balloon-borne experiment in NASA’s Explorer program. It has the same scientific reach as the program’s space-borne satellites, such as TESS (the Transiting Exoplanet Survey Satellite) and IXPE (Imaging X-Ray Polarimetry Explorer).

“With GUSTO, we’re really trying to trailblaze,” said Kieran Hegarty, Program Manager for GUSTO at APL. “We want to show that balloon investigations do return compelling science.”

A total of twelve mission team members from University of Arizona and APL are on site in Antarctica performing the final checks before GUSTO’s launch.

With seals and penguins nearby, Walker and colleagues are hard at work readying this experiment for its ultimate adventure in the sky. For Walker, GUSTO represents some 30 years of effort, the outgrowth of many experiments from Earth-based telescopes and other balloon efforts.

“We all feel very fortunate and privileged to do a mission like this – to have the opportunity to put together the world’s most advanced terahertz instrument ever created, and then drag it halfway around the world and then launch it,” he said. “It’s a challenge, but we feel honored and humbled to be in the position to do it.”

About the Mission

In March 2017, NASA Astrophysics Division selected the Explorer Mission of Opportunity GUSTO (Galactic/Extragalactic ULDB Spectroscopic Terahertz Observatory) to measure emissions from the interstellar medium to help scientists determine the life cycle of interstellar gas by surveying a large region of our Milky Way galaxy and the Large Magellanic Cloud. The GUSTO mission is led by Principal Investigator Christopher Walker from the University of Arizona in Tucson. The team also includes the Johns Hopkins University Applied Physics Laboratory in Laurel, Maryland, which provided the balloon platform to mount the instrumentation, known as the gondola, and the GUSTO project management. The University of Arizona provided the GUSTO telescope and the focal plane instrument, which incorporates detector technologies from NASA’s Jet Propulsion Laboratory in Pasadena, California, the Massachusetts Institute of Technology in Cambridge, Arizona State University in Tempe, and SRON Netherlands Institute for Space Research.

Media Contacts

Elizabeth Landau
Headquarters, Washington
202-358-0845
elizabeth.r.landau@nasa.gov

Alise Fisher
Headquarters, Washington
202-358-2546
alise.m.fisher@nasa.gov

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By European Space Agency
      Image: ESA’s Metal 3D Printer has produced the first metal part ever created in space. 
      The technology demonstrator, built by Airbus and its partners, was launched to the International Space Station at the start of this year, where ESA astronaut Andreas Mogensen installed the payload in the European Drawer Rack of ESA’s Columbus module. In August, the printer successfully printed the first 3D metal shape in space.  
      This product, along with three others planned during the rest of the experiment, will return to Earth for quality analysis: two of the samples will go to ESA’s technical heart in the Netherlands (ESTEC), another will go to ESA’s astronaut training centre in Cologne (EAC) for use in the LUNA facility, and the fourth will go to the Technical University of Denmark (DTU). 
      As exploration of the Moon and Mars will increase mission duration and distance from Earth, resupplying spacecraft will be more challenging.  Additive manufacturing in space will give autonomy for the mission and its crew, providing a solution to manufacture needed parts, to repair equipment or construct dedicated tools, on demand during the mission, rather than relying on resupplies and redundancies. 
      ESA’s technology demonstrator is the first to successfully print a metal component in microgravity conditions. In the past, the International Space Station has hosted plastic 3D printers.
      View the full article
    • By European Space Agency
      Image: The Copernicus Sentinel-2B satellite captured this image over Europe’s Spaceport in French Guiana on 2 September, just ahead of the Sentinel-2C launch. View the full article
    • By NASA
      2 min read
      Preparations for Next Moonwalk Simulations Underway (and Underwater)
      A prototype of the Mini Potable Water Dispenser, currently in development at NASA’s Marshall Space Flight Center, is displayed alongside various food pouches during a demonstration at NASA’s Johnson Space Center. NASA/David DeHoyos NASA engineers are working hard to ensure no astronaut goes hungry on the Artemis IV mission.
      When international teams of astronauts live on Gateway, humanity’s first space station to orbit the Moon, they’ll need innovative gadgets like the Mini Potable Water Dispenser. Vaguely resembling a toy water soaker, it manually dispenses water for hygiene bags, to rehydrate food, or simply to drink. It is designed to be compact, lightweight, portable and manual, making it ideal for Gateway’s relatively small size and remote location compared to the International Space Station closer to Earth.
      The team at NASA’s Marshall Space Flight Center in Huntsville, Alabama leading the development of the dispenser understands that when it comes to deep space cuisine, the food astronauts eat is so much more than just fuel to keep them alive.
      “Food doesn’t just provide body nourishment but also soul nourishment,” said Shaun Glasgow, project manager at Marshall. “So ultimately this device will help provide that little piece of soul nourishment. After a long day, the crew can float back and enjoy some pasta or scrambled eggs, a small sense of normalcy in a place far from home.”
      As NASA continues to innovate and push the boundaries of deep space exploration, devices like the compact, lightweight dispenser demonstrate a blend of practicality and ingenuity that will help humanity chart its path to the Moon, Mars, and beyond.
      An engineer demonstrates the use of the Mini Potable Water Dispenser by rehydrating a food pouch during a testing session at Johnson Space Center on June 6, 2024. This compact, lightweight dispenser is designed to help astronauts prepare meals in deep space.NASA/David DeHoyos A close-up view of the Mini Potable Water Dispenser prototype during a testing demonstration at NASA’s Johnson Space Center on June 6, 2024.NASA/David DeHoyos NASA food scientists rehydrate a food pouch during a test of the Mini Potable Water Dispenser at Johnson Space Center on June 6, 2024. NASA/David DeHoyos A NASA food scientist captures video of the Mini Potable Water Dispenser during testing at Johnson Space Center.NASA/David DeHoyos Matt Rowell, an engineer from the Marshall Space Flight Center demonstrates the Mini Potable Water Dispenser to NASA food scientists during a testing session.NASA/David DeHoyos Project manager Shaun Glasgow (right) demonstrates the Mini Potable Water Dispenser. NASA/David DeHoyos Brett Montoya, a lead space architect in the Center for Design and Space Architecture at Johnson Space Center, rehydrates a package of food using the Mini Potable Water Dispenser.NASA/David DeHoyos Learn More about Gateway Facebook logo @NASAGateway @NASA_Gateway Instagram logo @nasaartemis Share
      Details
      Last Updated Sep 04, 2024 EditorBriana R. ZamoraContactBriana R. Zamorabriana.r.zamora@nasa.govLocationJohnson Space Center Related Terms
      Artemis Earth's Moon Exploration Systems Development Mission Directorate Gateway Program Gateway Space Station Johnson Space Center Marshall Space Flight Center Explore More
      2 min read Gateway: Energizing Exploration
      Discover the cutting-edge technology powering Gateway, humanity's first lunar space station.
      Article 2 weeks ago 3 min read Gateway: Up Close in Stunning Detail
      Witness Gateway in stunning detail with this video that brings the future of lunar exploration…
      Article 2 months ago 2 min read Earth to Gateway: Electric Field Tests Enhance Lunar Communication
      Learn how engineers at NASA's Johnson Space Center are using electric field testing to optimize…
      Article 1 month ago Keep Exploring Discover More Topics From NASA
      Missions
      Humans in Space
      Climate Change
      Solar System
      View the full article
    • By Space Force
      U.S. Space Force Lt. Gen. David N. Miller, Jr., Space Operations Command commander, and Chief Master Sgt. Caleb Lloyd, SpOC senior enlisted leader, met with Airmen, Guardians and UK counterparts during a visit Aug. 27-30.

      View the full article
    • By NASA
      3 min read
      Preparations for Next Moonwalk Simulations Underway (and Underwater)
      A fisheye lens attached to an electronic still camera was used to capture this image of NASA astronaut Don Pettit.NASA Science ideas are everywhere. Some of the greatest discoveries have come from tinkering and toying with new concepts and ideas. NASA astronaut Don Pettit is no stranger to inventing and discovering. During his previous missions, Pettit has contributed to advancements for human space exploration aboard the International Space Station resulting in several published scientific papers and breakthroughs.

      Pettit, accompanied by cosmonauts Alexey Ovchinin and Ivan Vagner, will launch to the orbiting laboratory in September 2024. In preparation for his fourth spaceflight, read about previous “science of opportunity” experiments Pettit performed during his free time with materials readily available to the crew or included in his personal kit.

      Freezing Ice in Space
      Thin ice under polarized light frozen aboard the International Space Station.NASA Have you ever noticed a white bubble inside the ice in your ice tray at home? This is trapped air that accumulates in one area due to gravity. Pettit took this knowledge, access to a -90° Celsius freezer aboard the space station, and an open weekend to figure out how water freezes in microgravity compared to on Earth. This photo uses polarized light to show thin frozen water and the visible differences from the ice we typically freeze here on Earth, providing more insight into physics concepts in microgravity.

      Space Cup
      NASA astronaut Don Pettit demonstrates how surface tension, wetting, and container shape hold coffee in the space cup.NASA Microgravity affects even the most mundane tasks, like sipping your morning tea. Typically, crews drink beverages from a specially sealed bag with a straw. Using an overhead transparency film, Pettit invented the prototype of the Capillary Beverage, or Space Cup. The cup uses surface tension, wetting, and container shape to mimic the role of gravity in drinking on Earth, making drinking beverages in space easier to consume and showing how discoveries aboard station can be used to design new systems.
      Planetary Formation
      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Astronaut Don Pettit demonstrates a mixture of coffee grounds and sugar sticking together in microgravity to understand planetary formation. NASA Using materials that break into very small particles, such as table salt, sugar, and coffee, Pettit experimented to understand planetary formation. A crucial early step in planet formation is the aggregation or clumping of tiny particles, but scientists do not fully understand this process. Pettit placed different particulate mixtures in plastic bags, filled them with air, thoroughly shook the bags, and observed that the particles clumped within seconds due to what appears to be an electrostatic process. Studying the behavior of tiny particles in microgravity may provide valuable insight into how material composition, density, and turbulence play a role in planetary formation.
      Orbital Motion
      Charged water particles orbit a knitting needle, showing electrostatic processes in space. NASA Knitting needles made of different materials arrived aboard station as personal crew items. Pettit electrically charged the needles by rubbing each one with paper. Then, he released charged water from a Teflon syringe and observed the water droplets orbit the knitting needle, demonstrating electrostatic orbits in microgravity. The study was later repeated in a simulation that included atmospheric drag, and the 3D motion accurately matched the orbits seen in the space station demonstration. These observations could be analogous to the behavior of charged particles in Earth’s magnetic field and prove useful in designing future spacecraft systems.
      Astrophotography
      Top: NASA astronaut Don Pettit photographed in the International Space Station cupola surrounded by cameras. Bottom: Star trails photographed by NASA astronaut Don Pettit in March of 2012.NASA An innovative photographer, Pettit has used time exposure, multiple cameras, infrared, and other techniques to contribute breathtaking images of Earth and star trails from the space station’s unique viewpoint. These photos contribute to a database researchers use to understand Earth’s changing landscapes, and this imagery can inspire the public’s interest in human spaceflight.

      Christine Giraldo
      International Space Station Research Communications Team
      NASA’s Johnson Space Center
      Keep Exploring Discover More Topics
      Missions
      Humans in Space
      Climate Change
      Solar System
      View the full article
  • Check out these Videos

×
×
  • Create New...