Jump to content

The Marshall Star for November 29, 2023


NASA

Recommended Posts

  • Publishers
15 Min Read

The Marshall Star for November 29, 2023

From left, Artemis II astronauts Jeremy Hansen, Christina Koch, and Victor Glover listen as Commander Reid Wiseman talks during an employee event at NASA’s Marshall Space Flight Center on Nov. 27.

Artemis II Crew Enjoys Visit with Marshall Team Members

By Wayne Smith

From talking about continuing the legacy of NASA’s Marshall Space Flight Center in space exploration to describing their roles in an upcoming historic mission, Artemis II astronauts enjoyed visiting with center team members Nov. 27.

The crew will be the first to ride aboard NASA’s SLS (Space Launch System) rocket and Orion spacecraft. They will launch atop the rocket to venture around the Moon on Artemis II, the first crewed flight for Artemis. Their mission around the Moon will verify capabilities for humans to explore deep space and pave the way for long-term exploration and science on the lunar surface. Marshall manages the SLS Program.

From left, Artemis II astronauts Jeremy Hansen, Christina Koch, and Victor Glover listen as Commander Reid Wiseman talks during an employee event at NASA’s Marshall Space Flight Center on Nov. 27.
From left, Artemis II astronauts Jeremy Hansen, Christina Koch, and Victor Glover listen as Commander Reid Wiseman talks during an employee event at NASA’s Marshall Space Flight Center on Nov. 27.
NASA/Charles Beason

The four-member crew answered questions from a standing-room only crowd for about an hour inside Activities Building 4316 before taking photos with Marshall team members. The crew consists of NASA astronauts Reid Wiseman, who will be the Artemis II commander, Victor Glover (pilot) and Christina Koch (mission specialist), and Canadian Space Agency astronaut Jeremy Hansen (mission specialist).

They even took the time to send a personalized Christmas greeting to the grandmother of Corey Walker, an atmospheric science programmer at Marshall with Jacobs, who said it would be the perfect gift for her. During the question and answer portion of the event, the astronauts had Walker join them on stage and made a short greeting for his grandmother, Brenda Lowery, who lives on Sand Mountain.

“I can’t wait to give this to her because she loves the space program,” Walker said. “She was young when the astronauts went to the Moon the first time. She has lots of mementos at her house of the space program.”

After acting Center Director Joseph Pelfrey welcomed team members to the event, SLS Program Manager John Honeycutt talked about Marshall’s reputation of excellence in rocket propulsion and the success of Artemis I before introducing the astronauts.

Glover, third from left, makes a point during the Artemis II crew event with Marshall team members.
Glover, third from left, makes a point during the Artemis II crew event with Marshall team members.
NASA/Charles Beason

“Since the beginning, NASA astronauts have launched on historic missions and on rockets designed, developed, and built right here at Marshall Space Flight Center and our Michoud Assembly Facility,” Honeycutt said. “… It seems only fitting that when a new era of human space flight launches on a rocket developed here, that that’s the way it should be. We’ve been entrusted not just with an incredibly powerful and capable rocket, but with the lives of four astronauts. Their safety and return are chief among our responsibilities.”

Wiseman acknowledged Marshall’s rocket excellence, but also pointed out the center’s role in research for future missions to the Moon and working in the lunar environment. The Payload Operations Integration Center at Marshall is the control center for scientific operations on the International Space Station.

“(Marshall) means a lot more to us than getting us off this planet,’ Wiseman said. “It’s also our human research side when we are off the planet. When we are working sustainably in the lunar area, and we see humans on Mars, it’s built on the shoulders of POIC (Payload Operations Integration Center), of human research in orbit. That is the bread and butter of what we’re doing. We’re launching humans and living in space, and that is built right here at Marshall.”

Glover, who will be the first African American on a lunar mission, thanked Marshall team members for their work with SLS and the space station. He spent 168 days in space as a flight engineer aboard the space station for Expedition 64.

SLS Program Manager John Honeycutt, left, and acting Center Director Joseph Pelfrey, right, join the Artemis II crew for a photo at the employee event in Activities Building 4316.
SLS Program Manager John Honeycutt, left, and acting Center Director Joseph Pelfrey, right, join the Artemis II crew for a photo at the employee event in Activities Building 4316.
NASA/Charles Beason

“Thank you for your work supporting our friends who are working on the space station now and for that amazing legacy that we’ve all had the opportunity to be a part of in one facet or another,” Glover said. “We’re here to do the work and be a part of this team. We hope that what we’re doing makes you proud.”

Koch and Hansen also will make history with the Artemis II mission. Koch will be the first woman on a lunar mission, while Hansen will be the first Canadian.

Andy Buehler, a rocket propulsion engineer at Marshall with Boeing, asked Koch what her message to young girls is as they see a female going to the Moon for the first time.

“Surround yourself with people who are encouraging,” Koch said. “Tell yourself you’re going to do great things one day. You can be that voice for yourself. Don’t just strive to be a part of something, strive to be excellent at what you’re doing.”

Corey Walker, an atmospheric science programmer at Marshall with Jacobs, smiles with the astronauts as they record a video wishing Walker’s grandmother, Brenda Lowery, merry Christmas. During a question and answer session with the astronauts, Walker asked if he could get a video of them for his grandmother as a Christmas gift for her. Walker said his grandmother loves the space program. At far left is Lance D. Davis, Marshall’s news chief, who served as moderator for the event.
Corey Walker, an atmospheric science programmer at Marshall with Jacobs, smiles with the astronauts as they record a video wishing Walker’s grandmother, Brenda Lowery, merry Christmas. During a question and answer session with the astronauts, Walker asked if he could get a video of them for his grandmother as a Christmas gift for her. Walker said his grandmother loves the space program. At far left is Lance D. Davis, Marshall’s news chief, who served as moderator for the event.
NASA/Charles Beason

Hansen said he is excited about the future of Artemis. He told Marshall team members they are part of something that brings value to the world with NASA’s leadership.

“You’re doing that with partners around the world because you’re choosing to lead,” Hansen said. “We need that kind of leadership and that vision more than ever. We really need to be focused on things that lift up humanity. We have a lot of reason for hope for our future.”

Learn more about the Artemis II crew.

Smith, a Media Fusion employee and the Marshall Star editor, supports the Marshall Office of Communications.

› Back to Top

Artemis II Crew Signs NASA Moon Rocket Hardware at Marshall

Artemis II Astronauts Victor Glover, Reid Wiseman, Christina Koch, and Jeremy Hansen visit Marshall Space Flight Center in Huntsville, AL on Nov. 27 and sign the Artemis II Orion stage adapter
Brent Gaddes, lead for the Orion stage adapter in the Spacecraft Payload Integration & Evolution Office in the SLS Program at NASA’s Marshall Space Flight Center, far left, talks with NASA astronauts Reid Wiseman, center, and Christina Koch near the SLS Orion stage adapter for the Artemis II mission during their visit to Marshall on Nov. 27.
NASA/Charles Beason

Artemis II astronauts Victor Glover, Reid Wiseman, and Christina Koch of NASA, and CSA (Canadian Space Agency) astronaut Jeremy Hansen signed the Orion stage adapter for the SLS (Space Launch System) rocket at NASA’s Marshall Space Flight Center on Nov. 27. The hardware is the topmost portion of the SLS rocket that they will launch atop during Artemis II when the four astronauts inside NASA’s Orion spacecraft will venture around the Moon.

The Orion stage adapter is a small ring structure that connects NASA’s Orion spacecraft to the SLS rocket’s interim cryogenic propulsion stage and fully manufactured at Marshall. At five feet tall and weighing 1,800 pounds, the adapter is the smallest major element of the SLS rocket. During Artemis II, the adapter’s diaphragm will serve as a barrier to prevent gases created during launch from entering the spacecraft.

Artemis II Astronaut Jeremy Hansen visits Marshall Space Flight Center in Huntsville, AL on Nov. 27 and signs the Artemis II Orion stage adapter. Artemis II Astronaut Christina Koch visits Marshall Space Flight Center in Huntsville, AL on Nov. 27 and signs the Artemis II Orion stage adapter. Artemis II Astronaut Victor Glover visits Marshall Space Flight Center in Huntsville, AL on Nov. 27 and signs the Artemis II Orion stage adapter. Artemis II Astronaut Reid Wiseman visits Marshall Space Flight Center in Huntsville, AL on Nov. 27 and signs the Artemis II Orion stage adapter.
From left, Artemis II astronauts Jeremy Hansen, Christina Koch, Victor Glover, and Reid Wiseman sign the SLS Orion stage adapter for the Artemis II mission.
NASA/Charles Beason

In addition to signing the Orion stage adapter, Wiseman and Koch also visited the Systems Integration Lab at Marshall prior to an employee event.

Dan Mitchell, lead SLS integrated avionics and software engineer, talks with Wiseman and Koch as they visit the Systems Integration Lab at Marshall.
Dan Mitchell, lead SLS integrated avionics and software engineer, talks with Wiseman and Koch as they visit the Systems Integration Lab at Marshall.
NASA/Charles Beason

NASA is working to land the first woman and first person of color on the Moon under Artemis. SLS is part of NASA’s backbone for deep space exploration, along with the Orion spacecraft, advanced spacesuits and rovers, the Gateway in orbit around the Moon, and commercial human landing systems. SLS is the only rocket that can send Orion, astronauts, and supplies to the Moon in a single mission. Through Artemis, NASA will explore more of the lunar surface than ever before and prepare for the next giant leap: sending astronauts to Mars.

› Back to Top

Monthly Brown Bag Seminars Shine Spotlight on Marshall’s Business Units

By Jessica Barnett

With thousands of employees across hundreds of departments and teams, there’s no shortage of cool things happening at NASA’s Marshall Space Flight Center. To help keep Marshall team members up to date, the center recently started a series of monthly brown bag seminars aimed at highlighting its business units.

Each month features a different business unit. On Nov. 7, nearly 300 Marshall team members attended the first seminar, which focused on Marshall’s Moon/Mars Surface Technologies and Systems. In doing so, the participants learned more about the center’s strategy.

Geologist Jennifer Edmunson, from right, discusses lunar regolith and infrastructure plans during a brown bag seminar Nov. 7 at NASA’s Marshall Space Flight Center that highlighted the center’s Moon/Mars Surface Technologies and Systems business unit.
Geologist Jennifer Edmunson, from right, discusses lunar regolith and infrastructure plans during a brown bag seminar Nov. 7 at NASA’s Marshall Space Flight Center that highlighted the center’s Moon/Mars Surface Technologies and Systems business unit.
NASA/Charles Beason

“We’re in between the hopes and dreams of what you might find out there or what the vision of the future on the lunar surface might look like, and what is actually practical,” said Michael Zanetti, a lunar and planetary geologist at Marshall who was also one of the speakers during the Nov. 7 seminar.

Zanetti discussed GPS-denied LiDAR navigation systems, including KNaCK (Kinematic Navigation and Cartography Knapsack), a proof-of-concept 3D terrain mapping, navigation, and algorithm development tool that can be used to determine the layout of portions of the lunar or Martian surface even when there is no light source or GPS to guide it.

He also talked about Marshall’s Lunar Regolith Terrain Facility – a 125-by-125-foot area covered in 500 tons of lunar regolith simulant that can be quickly modified as needed for robotics testing.

“If we’re going to send anything to the lunar surface, we need to make sure that technology is going to be able to function when it gets there,” said Jennifer Edmunson, project manager for Marshall’s Moon-to-Mars Planetary Autonomous Construction Technology Project, or MMPACT. “Testing with regolith is important to do that, but since we don’t have enough regolith material from the Apollo missions, we rely on simulants.”

Materials test engineer Annette Gray, far left at table, explains how participants in Marshall’s MERCRII (Metallic Environmentally Resistant Coatings Rapid Innovation Initiative) worked with other centers and NASA partners to develop a radiation-resistant coating to improve the wear resistance of mechanism joints on the lunar or Martian surface.
Materials test engineer Annette Gray, far left at table, explains how participants in Marshall’s MERCRII (Metallic Environmentally Resistant Coatings Rapid Innovation Initiative) worked with other centers and NASA partners to develop a radiation-resistant coating to improve the wear resistance of mechanism joints on the lunar or Martian surface.

MMPACT is currently working to determine how best to build infrastructure on the lunar surface using the regolith and resources already available there. Edmunson shared how the project aims to build landing pads and even habitats on the Moon, but that it’s important to find ways of building that can withstand the extreme temperature variations, lengthy moonquakes, and other challenges that would be faced on the lunar surface.

Joining Edmunson and Zanetti at the seminar was Annette Gray, a materials test engineer who was part of MERCRII (Metallic Environmentally Resistant Coatings Rapid Innovation Initiative). Gray explained how the early career initiative project worked with other centers and NASA partners to develop a radiation-resistant coating to improve the wear resistance of mechanism joints on the lunar or Martian surface.

Part of the initiative included acquiring a Planetary, Lunar, and Asteroid Natural Environment Testbed, or PLANET. Gray said the PLANET was a 2-meter-by-3-meter chamber with up to 1 ton of regolith simulant inside that could test high vacuum, low-density plasma, and various atmospheric conditions.

Attendees at Marshall’s first brown bag seminar check out lunar regolith samples, view informational displays, and further discuss the featured topics following the seminar.
Attendees at Marshall’s first brown bag seminar check out lunar regolith samples, view informational displays, and further discuss the featured topics following the seminar.
NASA/Ray Osorio

The seminar ended with a question-and-answer session and a chance for in-person attendees to check out regolith simulant samples.

“It was an excellent way to showcase how the varied work we do at Marshall is enabling future NASA missions and addressing critical gaps,” said MMSTS Strategy Lead Shawn Maynor. “The excitement was palpable, and the discussion was lively. I truly feel that Marshall is in a unique position to capitalize on the evolving space industry.”

The next brown bag seminar is set for January 2024, after the winter holiday season.

Barnett, a Media Fusion employee, supports the Marshall Office of Communications.

› Back to Top

NASA Releases Its First International Space Station Tour in Spanish

Lee esta nota de prensa en español aquí.

Record-breaking NASA astronaut Frank Rubio provides the agency’s first Spanish-language video tour of humanity’s home in space – the International Space Station.

Rubio welcomes the public aboard the microgravity science laboratory in a behind-the-scenes look at living and working in space recorded during his 371-day mission aboard the space station, the longest single spaceflight in history by an American.

The station tour is available to watch on the agency’s NASA+ streaming platform, NASA app, NASA Television, YouTube, and the agency’s website.

Continuously inhabited for more than 23 years, the space station is a scientific platform where crew members conduct experiments across multiple disciplines of research, including Earth and space science, biology, human physiology, physical sciences, and technology demonstrations that could not be performed on Earth.

The Payload Operations Integration Center at NASA’s Marshall Space Flight Center operates, plans, and coordinates the science experiments onboard the space station 365 days a year, 24 hours a day.

The crew living aboard the station are the hands of thousands of researchers on the ground conducting more than 3,300 experiments in microgravity. During his record-breaking mission, Rubio spent many hours contributing to scientific activities aboard the orbiting laboratory, conducting everything from human health studies to plant research.

Rubio returned to Earth in September, having completed approximately 5,936 orbits of the Earth and a journey of more than 157 million miles during his first spaceflight, roughly the equivalent of 328 trips to the Moon and back.

Get the latest NASA space station news, images and features on InstagramFacebook, and X.

› Back to Top

NASA’s Dragonfly to Proceed with Final Mission Design Work

NASA’s Dragonfly mission has been authorized to proceed with work on final mission design and fabrication – known as Phase C – during FY (fiscal year) 2024. The agency is postponing formal confirmation of the mission (including its total cost and schedule) until mid-2024, following the release of the FY 2025 President’s Budget Request.

Earlier this year, Dragonfly – a mission to send a rotorcraft to explore Saturn’s moon Titan – passed all the success criteria of its Preliminary Design Review. The Dragonfly team conducted a re-plan of the mission based on expected funding available in FY 2024 and estimate a revised launch readiness date of July 2028. The agency will officially assess the mission’s launch readiness date in mid-2024 at the agency Program Management Council.

NASA's Dragonfly rotorcraft-lander animation
Artist’s impression of Dragonfly heading off toward its next landing spot on Titan.
NASA/Johns Hopkins APL/Steve Gribben

“The Dragonfly team has successfully overcome a number of technical and programmatic challenges in this daring endeavor to gather new science on Titan,” said Nicola Fox, associate administrator of NASA’s Science Mission Directorate at NASA Headquarters. “I am proud of this team and their ability to keep all aspects of the mission moving toward confirmation.”

Dragonfly takes a novel approach to planetary exploration, for the first time employing a rotorcraft-lander to travel between and sample diverse sites on Titan. Dragonfly’s goal is to characterize the habitability of the moon’s environment, investigate the progression of prebiotic chemistry in an environment where carbon-rich material and liquid water may have mixed for an extended period, and even search for chemical indications of whether water-based or hydrocarbon-based life once existed on Titan.

Dragonfly is being designed and built under the direction of the Johns Hopkins Applied Physics Laboratory in Laurel, Maryland, which manages the mission for NASA. The team includes key partners at NASA’s Goddard Space Flight Center; Lockheed Martin Space in Littleton, Colorado; Sikorsky, a Lockheed Martin company; NASA’s Ames Research Center; NASA’s Langley Research Center; Penn State University in State College, Pennsylvania; Malin Space Science Systems in San Diego, California; Honeybee Robotics in Pasadena, California; NASA’s Jet Propulsion Laboratory; CNES (Centre National d’Etudes Spatiales), the French space agency, in Paris, France; DLR (German Aerospace Center) in Cologne, Germany; and JAXA (Japan Aerospace Exploration Agency) in Tokyo, Japan.

Dragonfly is the fourth mission in NASA’s New Frontiers Program, managed by NASA’s Marshall Space Flight Center for the Science Mission Directorate.

› Back to Top

Webb Telescope: A Prominent Protostar in Perseus

A new Picture of the Month from the NASA/ESA/CSA James Webb Space Telescope reveals intricate details of the Herbig Haro object 797, known as HH 797.

Herbig-Haro objects are luminous regions surrounding newborn stars (known as protostars), and are formed when stellar winds or jets of gas spewing from these newborn stars form shockwaves colliding with nearby gas and dust at high speeds. HH 797, which dominates the lower half of the image, is located close to the young open star cluster IC 348, which is located near the eastern edge of the Perseus dark cloud complex. The bright infrared objects in the upper portion of the image are thought to host two further protostars.

In the lower half of the image is a narrow, horizontal nebula that stretches from edge to edge. It is brightly coloured with more variety on its right side. In the upper half there is a glowing point with multi-coloured light radiating from it in all directions. A bright star with long diffraction spikes lies along the right edge, and a few smaller stars are spread around. The background is covered in a thin haze.
The NASA/ESA/CSA James Webb Space Telescope reveals intricate details of the Herbig Haro object 797, or HH 797. HH 797, which dominates the lower half of this image, is located close to the young open star cluster IC 348, which is located near the eastern edge of the Perseus dark cloud complex. The bright infrared objects in the upper portion of the image are thought to host two further protostars. This image was captured with Webb’s Near-InfraRed Camera (NIRCam).
ESA/Webb, NASA & CSA, T. Ray (Dublin Institute for Advanced Studies)

The image was captured with Webb’s NIRCam (Near-InfraRed Camera). Infrared imaging is powerful in studying newborn stars and their outflows, because the youngest stars are invariably still embedded within the gas and dust from which they are formed. The infrared emission of the star’s outflows penetrates the obscuring gas and dust, making Herbig-Haro objects ideal for observation with Webb’s sensitive infrared instruments. Molecules excited by the turbulent conditions, including molecular hydrogen and carbon monoxide, emit infrared light that Webb can collect to visualize the structure of the outflows. NIRCam is particularly good at observing the hot (thousands of degree Celsius) molecules that are excited as a result of shocks.

Using ground-based observations, researchers have previously found that for cold molecular gas associated with HH 797, most of the red-shifted gas (moving away from us) is found to the south (bottom right), while the blue-shifted gas (moving towards us) is to the north (bottom left). A gradient was also found across the outflow, such that at a given distance from the young central star, the velocity of the gas near the eastern edge of the jet is more red-shifted than that of the gas on the western edge. Astronomers in the past thought this was due to the outflow’s rotation. In this higher resolution Webb image, however, we can see that what was thought to be one outflow is in fact made up of two almost parallel outflows with their own separate series of shocks (which explains the velocity asymmetries). The source, located in the small dark region (bottom right of center), and already known from previous observations, is therefore not a single but a double star. Each star is producing its own dramatic outflow. Other outflows are also seen in this image, including one from the protostar in the top right of center along with its illuminated cavity walls.

HH 797 resides directly north of HH 211 (separated by approximately 30 arcseconds), which was the feature of a Webb image release in September 2023.

The James Webb Space Telescope is the world’s premier space science observatory. Webb is solving mysteries in our solar system, looking beyond to distant worlds around other stars, and probing the mysterious structures and origins of our universe and our place in it. Webb is an international program led by NASA with its partners, ESA (European Space Agency) and the Canadian Space Agency. Several NASA centers contributed to the project, including NASA’s Marshall Space Flight Center.

› Back to Top

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By NASA
      NASA’s Human Landing System (HLS) will transport the next astronauts that land on the Moon, including the first woman and first person of color, beginning with Artemis III. For safety and mission success, the landers and other equipment in development for NASA’s Artemis campaign must work reliably in the harshest of environments.
      The Hub for Innovative Thermal Technology Maturation and Prototyping (HI-TTeMP) lab at NASA’s Marshall Space Flight Center in Huntsville, Alabama, provides engineers with thermal analysis of materials that may be a prototype or in an early developmental stage using a vacuum chamber, back left, and a conduction chamber, right. NASA/Ken Hall Engineers at NASA’s Marshall Space Flight Center in Huntsville, Alabama, are currently testing how well prototype insulation for SpaceX’s Starship HLS will insulate interior environments, including propellant storage tanks and the crew cabin. Starship HLS will land astronauts on the lunar surface during Artemis III and Artemis IV.
      Marshall’s Hub for Innovative Thermal Technology Maturation and Prototyping (HI-TTeMP) laboratory provides the resources and tools for an early, quick-check evaluation of insulation materials destined for Artemis deep space missions.
      “Marshall’s HI-TTeMP lab gives us a key testing capability to help determine how well the current materials being designed for vehicles like SpaceX’s orbital propellant storage depot and Starship HLS, will insulate the liquid oxygen and methane propellants,” said HLS chief engineer Rene Ortega. “By using this lab and the expertise provided by the thermal engineers at Marshall, we are gaining valuable feedback earlier in the design and development process that will provide additional information before qualifying hardware for deep space missions.”
      A peek inside the conductive test chamber at NASA Marshall’s HI-TTeMP lab where thermal engineers design, set up, execute, and analyze materials destined for deep space to better understand how they will perform in the cold near-vacuum of space. NASA/Ken Hall On the Moon, spaceflight hardware like Starship HLS will face extreme temperatures. On the Moon’s south pole during lunar night, temperatures can plummet to -370 degrees Fahrenheit (-223 degrees Celsius). Elsewhere in deep space temperatures can range from roughly 250 degrees Fahrenheit (120 degrees Celsius) in direct sunlight to just above absolute zero in the shadows.
      There are two primary means of managing thermal conditions: active and passive. Passive thermal controls include materials such as insulation, white paint, thermal blankets, and reflective metals. Engineers can also design operational controls, such as pointing thermally sensitive areas of a spacecraft away from direct sunlight, to help manage extreme thermal conditions. Active thermal control measures that could be used include radiators or cryogenic coolers.
      Engineers use two vacuum test chambers in the lab to simulate the heat transfer effects of the deep space environment and to evaluate the thermal properties of the materials. One chamber is used to understand radiant heat, which directly warms an object in its path, such as when heat from the Sun shines on it. The other test chamber evaluates conduction by isolating and measuring its heat transfer paths.
      NASA engineers working in the HI-TTeMP lab not only design, set up, and run tests, they also provide insight and expertise in thermal engineering to assist NASA’s industry partners, such as SpaceX and other organizations, in validating concepts and models, or suggesting changes to designs. The lab is able to rapidly test and evaluate design updates or iterations.
      NASA’s HLS Program, managed by NASA Marshall, is charged with safely landing astronauts on the Moon as part of Artemis. NASA has awarded contracts to SpaceX for landing services for Artemis III and IV and to Blue Origin for Artemis V. Both landing services providers plan to transfer super-cold propellant in space to send landers to the Moon with full tanks.
      With Artemis, NASA will explore more of the Moon than ever before, learn how to live and work away from home, and prepare for future human exploration of Mars. NASA’s SLS (Space Launch System) rocket, exploration ground systems, and Orion spacecraft, along with the HLS, next-generation spacesuits, Gateway lunar space station, and future rovers are NASA’s foundation for deep space exploration.
      For more on HLS, visit: 
      https://www.nasa.gov/humans-in-space/human-landing-system
      News Media Contact
      Corinne Beckinger 
      Marshall Space Flight Center, Huntsville, Ala. 
      256.544.0034  
      corinne.m.beckinger@nasa.gov 
      Explore More
      8 min read Preguntas frecuentes: La verdadera historia del cuidado de la salud de los astronautas en el espacio
      Article 1 day ago 6 min read FAQ: The Real Story About Astronaut Health Care in Space
      Article 1 day ago 3 min read Ready, Set, Action! Our Sun is the Star in Dazzling Simulation
      Article 1 day ago
      r
      View the full article
    • By European Space Agency
      Week in images: 18-22 November 2024
      Discover our week through the lens
      View the full article
    • By NASA
      NASA/JPL-Caltech This Oct. 4, 2017, illustration shows a hypothetical uneven ring of dust orbiting KIC 8462852, also known as Boyajian’s Star or Tabby’s Star. The star has experienced unusual dips in brightness over a matter of days, as well as much subtler but longer-term dimming trends. Scientists proposed several explanations for this unexpected behavior, ranging from Tabby’s Star swallowing a planet to alien “megastructures” harvesting the star’s energy. However, a study using NASA’s Spitzer and Swift missions as well as the Belgian AstroLAB IRIS observatory suggests that the cause of the dimming over long periods is likely an uneven dust cloud moving around the star.
      Learn more about this enigmatic star, named after Tabetha Boyajian, the Yale University postdoc who discovered it with the help of citizen scientists.
      Image credit: NASA/JPL-Caltech
      View the full article
    • By NASA
      3 min read
      Preparations for Next Moonwalk Simulations Underway (and Underwater)
      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      A 3D simulation showing the evolution of turbulent flows in the upper layers of the Sun. The more saturated and bright reds represent the most vigorous upward or downward twisting motions. Clear areas represent areas where there is only relatively slow up-flows, with very little twisting.NASA/Irina Kitiashvili and Timothy A. Sandstrom NASA supercomputers are shedding light on what causes some of the Sun’s most complex behaviors. Using data from the suite of active Sun-watching spacecraft currently observing the star at the heart of our solar system, researchers can explore solar dynamics like never before. 
      The animation shows the strength of the turbulent motions of the Sun’s inner layers as materials twist into its atmosphere, resembling a roiling pot of boiling water or a flurry of schooling fish sending material bubbling up to the surface or diving it further down below. 
      “Our simulations use what we call a realistic approach, which means we include as much as we know to-date about solar plasma to reproduce different phenomena observed with NASA space missions,” said Irina Kitiashvili, a scientist at NASA’s Ames Research Center in California’s Silicon Valley who helped lead the study. 
      Using modern computational capabilities, the team was able, for the first time to reproduce the fine structures of the subsurface layer observed with NASA’s Solar Dynamics Observatory.
      “Right now, we don’t have the computational capabilities to create realistic global models of the entire Sun due to the complexity,” said Kitiashvili. “Therefore, we create models of smaller areas or layers, which can show us structures of the solar surface and atmosphere – like shock waves or tornado-like features measuring only a few miles in size; that’s much finer detail than any one spacecraft can resolve.”
      Scientists seek to better understand the Sun and what phenomena drive the patterns of its activity. The connection and interactions between the Sun and Earth drive the seasons, ocean currents, weather, climate, radiation belts, auroras and many other phenomena. Space weather predictions are critical for exploration of space, supporting the spacecraft and astronauts of NASA’s Artemis campaign. Surveying this space environment is a vital part of understanding and mitigating astronaut exposure to space radiation and keeping our spacecraft and instruments safe.
      This has been a big year for our special star, studded with events like the annular eclipse, a total eclipse, and the Sun reaching its solar maximum period. In December 2024, NASA’s Parker Solar Probe mission – which is helping researchers to understand space weather right at the source – will make its closest-ever approach to the Sun and beat its own record of being the closest human-made object to reach the Sun. 
      The Sun keeps surprising us. We are looking forward to seeing what kind of exciting events will be organized by the Sun."
      Irina Kitiashvili
      NASA Scientist
      “The Sun keeps surprising us,” said Kitiashvili. “We are looking forward to seeing what kind of exciting events will be organized by the Sun.”
      These simulations were run on the Pleaides supercomputer at the NASA Advanced Supercomputing facility at NASA Ames over several weeks of runtime, generating terabytes of data. 
      NASA is showcasing 29 of the agency’s computational achievements at SC24, the international supercomputing conference, Nov. 17-22, 2023, in Atlanta, Georgia. For more technical information, visit: ​
      https://www.nas.nasa.gov/sc24
      For news media: Members of the news media interested in covering this topic should reach out to the NASA Ames newsroom.
      Share
      Details
      Last Updated Nov 21, 2024 Related Terms
      General Ames Research Center Heliophysics Solar Dynamics Observatory (SDO) Sunspots The Sun Explore More
      2 min read Weld-ASSIST: Weldability Assessment for In-Space Conditions using a Digital Twin
      Article 5 hours ago 5 min read NASA’s Chandra, Hubble Tune Into ‘Flame-Throwing’ Guitar Nebula
      Article 23 hours ago 4 min read Protected: 2024 Blue Marble Awards
      Article 24 hours ago Keep Exploring Discover More Topics From NASA
      Parker Solar Probe
      On a mission to “touch the Sun,” NASA’s Parker Solar Probe became the first spacecraft to fly through the corona…
      Solar Storms and Flares
      Solar storms and flares are eruptions from the Sun that can affect us here on Earth.
      Solar System
      Track the Solar Cycle with Sunspots
      Participate in sunspot-counting activities using NASA telescopes or your own.
      View the full article
    • By NASA
      Hubble Space Telescope Home NASA’s Hubble Finds… Hubble Space Telescope Hubble Home Overview About Hubble The History of Hubble Hubble Timeline Why Have a Telescope in Space? Hubble by the Numbers At the Museum FAQs Impact & Benefits Hubble’s Impact & Benefits Science Impacts Cultural Impact Technology Benefits Impact on Human Spaceflight Astro Community Impacts Science Hubble Science Science Themes Science Highlights Science Behind Discoveries Hubble’s Partners in Science Universe Uncovered Explore the Night Sky Observatory Hubble Observatory Hubble Design Mission Operations Missions to Hubble Hubble vs Webb Team Hubble Team Career Aspirations Hubble Astronauts News Hubble News Hubble News Archive Social Media Media Resources Multimedia Multimedia Images Videos Sonifications Podcasts E-books Lithographs Fact Sheets Glossary Posters Hubble on the NASA App More Online Activities   5 Min Read NASA’s Hubble Finds Sizzling Details About Young Star FU Orionis
      An artist’s concept of the early stages of the young star FU Orionis (FU Ori) outburst, surrounded by a disk of material. Credits:
      NASA-JPL, Caltech In 1936, astronomers saw a puzzling event in the constellation Orion: the young star FU Orionis (FU Ori) became a hundred times brighter in a matter of months. At its peak, FU Ori was intrinsically 100 times brighter than our Sun. Unlike an exploding star though, it has declined in luminosity only languidly since then.
      Now, a team of astronomers has wielded NASA’s Hubble Space Telescope‘s ultraviolet capabilities to learn more about the interaction between FU Ori’s stellar surface and the accretion disk that has been dumping gas onto the growing star for nearly 90 years. They find that the inner disk touching the star is extraordinarily hot — which challenges conventional wisdom.
      The observations were made with the telescope’s COS (Cosmic Origins Spectrograph) and STIS (Space Telescope Imaging Spectrograph) instruments. The data includes the first far-ultraviolet and new near-ultraviolet spectra of FU Ori.
      “We were hoping to validate the hottest part of the accretion disk model, to determine its maximum temperature, by measuring closer to the inner edge of the accretion disk than ever before,” said Lynne Hillenbrand of Caltech in Pasadena, California, and a co-author of the paper. “I think there was some hope that we would see something extra, like the interface between the star and its disk, but we were certainly not expecting it. The fact we saw so much extra — it was much brighter in the ultraviolet than we predicted — that was the big surprise.”
      A Better Understanding of Stellar Accretion
      Originally deemed to be a unique case among stars, FU Ori exemplifies a class of young, eruptive stars that undergo dramatic changes in brightness. These objects are a subset of classical T Tauri stars, which are newly forming stars that are building up by accreting material from their disk and the surrounding nebula. In classical T Tauri stars, the disk does not touch the star directly because it is restricted by the outward pressure of the star’s magnetic field.
      The accretion disks around FU Ori objects, however, are susceptible to instabilities due to their enormous mass relative to the central star, interactions with a binary companion, or infalling material. Such instability means the mass accretion rate can change dramatically. The increased pace disrupts the delicate balance between the stellar magnetic field and the inner edge of the disk, leading to material moving closer in and eventually touching the star’s surface.
      This is an artist’s concept of the early stages of the young star FU Orionis (FU Ori) outburst, surrounded by a disk of material. A team of astronomers has used the Hubble Space Telescope’s ultraviolet capabilities to learn more about the interaction between FU Ori’s stellar surface and the accretion disk that has been dumping gas onto the growing star for nearly 90 years. They found that the inner disk, touching the star, is much hotter than expected—16,000 kelvins—nearly three times our Sun’s surface temperature. That sizzling temperature is nearly twice as hot as previously believed. NASA-JPL, Caltech
      Download this image

      The enhanced infall rate and proximity of the accretion disk to the star make FU Ori objects much brighter than a typical T Tauri star. In fact, during an outburst, the star itself is outshined by the disk. Furthermore, the disk material is orbiting rapidly as it approaches the star, much faster than the rotation rate of the stellar surface. This means that there should be a region where the disk impacts the star and the material slows down and heats up significantly. 
      “The Hubble data indicates a much hotter impact region than models have previously predicted,” said Adolfo Carvalho of Caltech and lead author of the study. “In FU Ori, the temperature is 16,000 kelvins [nearly three times our Sun’s surface temperature]. That sizzling temperature is almost twice the amount prior models have calculated. It challenges and encourages us to think of how such a jump in temperature can be explained.”
      To address the significant difference in temperature between past models and the recent Hubble observations, the team offers a revised interpretation of the geometry within FU Ori’s inner region: The accretion disk’s material approaches the star and once it reaches the stellar surface, a hot shock is produced, which emits a lot of ultraviolet light.
      Planet Survival Around FU Ori
      Understanding the mechanisms of FU Ori’s rapid accretion process relates more broadly to ideas of planet formation and survival.
      “Our revised model based on the Hubble data is not strictly bad news for planet evolution, it’s sort of a mixed bag,” explained Carvalho. “If the planet is far out in the disk as it’s forming, outbursts from an FU Ori object should influence what kind of chemicals the planet will ultimately inherit. But if a forming planet is very close to the star, then it’s a slightly different story. Within a couple outbursts, any planets that are forming very close to the star can rapidly move inward and eventually merge with it. You could lose, or at least completely fry, rocky planets forming close to such a star.”
      Additional work with the Hubble UV observations is in progress. The team is carefully analyzing the various spectral emission lines from multiple elements present in the COS spectrum. This should provide further clues on FU Ori’s environment, such as the kinematics of inflowing and outflowing gas within the inner region.
      “A lot of these young stars are spectroscopically very rich at far ultraviolet wavelengths,” reflected Hillenbrand. “A combination of Hubble, its size and wavelength coverage, as well as FU Ori’s fortunate circumstances, let us see further down into the engine of this fascinating star-type than ever before.”
      These findings have been published in The Astrophysical Journal Letters.
      The observations were taken as part of General Observer program 17176.
      The Hubble Space Telescope has been operating for over three decades and continues to make ground-breaking discoveries that shape our fundamental understanding of the universe. Hubble is a project of international cooperation between NASA and ESA (European Space Agency). NASA’s Goddard Space Flight Center in Greenbelt, Maryland, manages the telescope and mission operations. Lockheed Martin Space, based in Denver, also supports mission operations at Goddard. The Space Telescope Science Institute in Baltimore, which is operated by the Association of Universities for Research in Astronomy, conducts Hubble science operations for NASA.
      Facebook logo @NASAHubble @NASAHubble Instagram logo @NASAHubble Media Contacts:
      Claire Andreoli (claire.andreoli@nasa.gov)
      NASA’s Goddard Space Flight Center, Greenbelt, MD
      Abigail Major, Ray Villard
      Space Telescope Science Institute, Baltimore, MD
      Share








      Details
      Last Updated Nov 21, 2024 Editor Andrea Gianopoulos Location NASA Goddard Space Flight Center Related Terms
      Astrophysics Astrophysics Division Goddard Space Flight Center Hubble Space Telescope Stars Keep Exploring Discover More Topics From Hubble
      Hubble Space Telescope


      Since its 1990 launch, the Hubble Space Telescope has changed our fundamental understanding of the universe.


      Exploring the Birth of Stars



      Hubble’s Night Sky Challenge



      Hubble Focus: The Lives of Stars


      This e-book highlights the mission’s recent discoveries and observations related to the birth, evolution, and death of stars.

      View the full article
  • Check out these Videos

×
×
  • Create New...