Jump to content

New Software Enables Atmospheric Modeling with Greater Resolution


NASA

Recommended Posts

  • Publishers
3 Min Read

New Software Enables Atmospheric Modeling with Greater Resolution

geos-chem1.png?w=985
Credits:
Randall Martin / Washington University

PROJECT

High Performance GEOS-Chem

SNAPSHOT

An ESTO investment in software optimization helps researchers and citizen scientists model air quality and greenhouse gases with greater resolution, allowing them to better understand how global atmospheric trends impact local areas.

geos-chem1.png?w=985
A data visualization describing atmospheric NO2 concentrations, produced using High Performance GEOS-Chem
Image credit: Randall Martin / Washington University

Next-generation software is making it easier for researchers, policy makers, and citizen scientists to model air quality and greenhouse gases using NASA meteorological data.

This novel software, “High Performance GEOS-Chem,” uses equations representing the Earth’s atmospheric chemistry and boundary conditions from NASA’s Goddard Earth Observation System (GEOS) to represent global atmospheric chemistry across three dimensions at a horizontal spatial resolution of 12 kilometers by 12 kilometers per pixel—an area about one-fifth the size of New York City.

For comparison, the original GEOS-Chem model that was developed in 2001 only produced global simulations at a spatial resolution of about 200 by 250 square kilometers – an area about twice as large as the entire state of New Jersey.

With this improved resolution, researchers interested in air quality and atmospheric chemistry in specific communities can use models, simulations, and visualizations built with NASA data to better understand how global atmospheric trends impact local areas.

GEOS-Chem is an open-source model freely accessible here. More information about High Performance Geos-Chem – including manuals and tutorials – can be found here.

“This new generation of High Performance GEOS-Chem offers major advancements for ease of use, computational performance, versatility, resolution, and accuracy,” said Randall Martin, a professor at Washington University’s McKelvey School of Engineering and Primary Investigator for the High Performance GEOS-Chem project.

In a recent technical demonstration of their improved GEOS-Chem software, Martin and his team showed two images mapping tropospheric nitrogen dioxide – a pollutant typically produced by burning fossil fuels.

The image produced with High Performance GEOS-Chem featured 200 million more grid cells than the image produced with the original GEOS-Chem software. In other words, High Performance GEOS-Chem creates images more resolute by a factor of about 200.

“We’re really excited. Many features can be examined that aren’t resolved at all at the coarser resolution,” said Martin.

For researchers interested in global air quality and atmospheric composition with local resolution, this new generation of the High Performance GEOS-Chem marks the beginning of a new era for creating descriptive models.

geos-chem2.png?w=1704
Two visualizations using the same data generated by High Performance GEOS-Chem (top) and the original GEOS-Chem software (bottom). High Performance GEOS-Chem created an image more resolute than the original GEOS-Chem software by a factor of 200.
(Image credit: Randall Martin / Washington University)

Martin and his team added a number of technological innovations to High Performance GEOS-Chem. In particular, they incorporated a cubed-sphere computation grid into their GEOS-Chem software, reducing noise at the poles and allowing for higher resolution.

High Performance GEOS-Chem also includes a cloud computing capability. This spreads the resource-intensive computation work of generating detailed atmospheric models across dispersed computing nodes, such as Amazon Web Services.

Martin and his team pride themselves on ensuring GEOS-Chem remains an open and accessible tool for anyone interested in simulating atmospheric composition. Their website includes a full suite of tutorial videos, manuals, and guides for using GEOS-Chem effectively.

“NASA enabled us to develop this new generation of GEOS-Chem that has both the additional technical performance and offers the ease of use that this large community requires,” said Martin.

Future iterations of GEOS-Chem could feature further improvements. Developing a better user interface and increasing the modularity of GEOS-Chem are just a few objectives Martin and his team have in mind.

NASA’s Advanced Information Systems Technology (AIST), a part of NASA’s Earth Science Technology Office (ESTO), funded this program.

PROJECT LEAD

Randall Martin, Washington University in St. Louis

SPONSORING ORGANIZATION

Earth Science Division’s Advanced Information Systems Technology (AIST) Program

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By NASA
      Mars: Perseverance (Mars 2020) Perseverance Home Mission Overview Rover Components Mars Rock Samples Where is Perseverance? Ingenuity Mars Helicopter Mission Updates Science Overview Objectives Instruments Highlights Exploration Goals News and Features Multimedia Perseverance Raw Images Images Videos Audio More Resources Mars Missions Mars Sample Return Mars Perseverance Rover Mars Curiosity Rover MAVEN Mars Reconnaissance Orbiter Mars Odyssey More Mars Missions The Solar System The Sun Mercury Venus Earth The Moon Mars Jupiter Saturn Uranus Neptune Pluto & Dwarf Planets Asteroids, Comets & Meteors The Kuiper Belt The Oort Cloud 2 min read
      Reaching New Heights to Unravel Deep Martian History!
      This is an image of the rim that the Perseverance rover took on sol 383 (March 19th, 2022) when it was traversing the crater floor. Dox Castle is located at the top of the image in the far ground. NASA/JPL-Caltech/ASU The Perseverance rover is reaching new heights as it ascends the rim of Jezero crater (over 300 meters in elevation higher than the original landing site)! The rover is now enroute to its first campaign science stop Dox Castle (image in the far ground) a region of interest for its potential to host ancient Mars’ bedrock in the exposed rocks on the rim.
      Impact craters like Jezero may be the key to piecing together the early geologic history of Mars, as they provide a window into the history of the ancient crust by excavating and depositing deep crustal materials above the surface. Crater rims act as keepers of ancient Martian history, uplifting and exposing the stratigraphy of these impacted materials. Additionally, extreme heat from the impact can encourage the circulation of fluids through fractures similar to hydrothermal vents, which have implications for early habitability and may be preserved in the exposed rim bedrock. With the Perseverance rover we have the potential to explore some of the oldest exposed rocks on the planet.
      Exploring such diverse terrains takes a lot of initial planning! The team has been preparing for the Crater Rim Campaign these last few months by working together to map out the types of materials Perseverance may encounter during its traverse up and through the rim. Using orbital images from the High-Resolution Imaging Science Experiment (HiRISE) instrument, the science team divided the rim area into 36 map quadrants, carefully mapping different rock units based on the morphologies, tones, and textures they observed in the orbital images. Mapping specialists then connected units across the quads to turn 36 miniature maps into one big geologic map of the crater rim. This resource is being used by the team to plan strategic routes to scientific areas of interest on the rim.
      On Earth, geologic maps are made using a combination of orbital images and mapping in the field. Planetary scientists don’t typically get to check their map in the field, but we have the unique opportunity to validate our map using our very own robot geologist! Dox Castle will be our first chance to do rim science – and we’re excited to search for evidence of the transition between the margin and rim materials to start piecing together the stratigraphic history of the rocks that make up the rim of Jezero crater.
      Written by Margaret Deahn, Ph.D. student at Purdue University
      Share








      Details
      Last Updated Sep 16, 2024 Related Terms
      Blogs Explore More
      5 min read Sols 4304-4006: 12 Years, 42 Drill Holes, and Now… 1 Million ChemCam Shots!


      Article


      3 days ago
      3 min read Sols 4302-4303: West Side of Upper Gediz Vallis, From Tungsten Hills to the Next Rocky Waypoint


      Article


      3 days ago
      2 min read Margin’ up the Crater Rim!


      Article


      6 days ago
      Keep Exploring Discover More Topics From NASA
      Mars


      Mars is the fourth planet from the Sun, and the seventh largest. It’s the only planet we know of inhabited…


      All Mars Resources


      Explore this collection of Mars images, videos, resources, PDFs, and toolkits. Discover valuable content designed to inform, educate, and inspire,…


      Rover Basics


      Each robotic explorer sent to the Red Planet has its own unique capabilities driven by science. Many attributes of a…


      Mars Exploration: Science Goals


      The key to understanding the past, present or future potential for life on Mars can be found in NASA’s four…

      View the full article
    • By Space Force
      Secretary of Defense Lloyd J. Austin III announced seven initiatives to improve the quality of life for service members and their families.
      View the full article
    • By NASA
      On the left, the Canopee transport carrier containing the European Service Module for NASA’s Artemis III mission arrives at Port Canaveral in Florida, on Tuesday, Sept. 3, 2024, before completing the last leg of its journey to the agency’s Kennedy Space Center’s Neil A. Armstrong Operations and Checkout via truck. On the right, NASA’s Pegasus barge, carrying several pieces of hardware for Artemis II, III, and IV arrives at NASA Kennedy’s Launch Complex 39 turn basin wharf on Thursday, Sept. 5, 2024. Credit: NASA From across the Atlantic Ocean and through the Gulf of Mexico, two ships converged, delivering key spacecraft and rocket components of NASA’s Artemis campaign to the agency’s Kennedy Space Center in Florida.
      On Sept. 3, ESA (European Space Agency) marked a milestone in the Artemis III mission as its European-built service module for NASA’s Orion spacecraft completed a transatlantic journey from Bremen, Germany, to Port Canaveral, Florida, where technicians moved it to nearby NASA Kennedy. Transported aboard the Canopée cargo ship, the European Service Module—assembled by Airbus with components from 10 European countries and the U.S.—provides propulsion, thermal control, electrical power, and water and oxygen for its crews.
      “Seeing multi-mission hardware arrive at the same time demonstrates the progress we are making on our Artemis missions,” said Amit Kshatriya, deputy associate administrator, Moon to Mars Program, at NASA Headquarters in Washington. “We are going to the Moon together with our industry and international partners and we are manufacturing, assembling, building, and integrating elements for Artemis flights.”
      NASA’s Pegasus barge, the agency’s waterway workhorse for transporting large hardware by sea, ferried multi-mission hardware for the agency’s SLS (Space Launch System) rocket, the Artemis II launch vehicle stage adapter, the “boat-tail” of the core stage for Artemis III, the core stage engine section for Artemis IV, along with ground support equipment needed to move and assemble the large components. The barge pulled into NASA Kennedy’s Launch Complex 39B Turn Basin Thursday.
      The spacecraft factory inside NASA Kennedy’s Neil Armstrong Operations and Checkout Building is set to buzz with additional activity in the coming months. With the Artemis II Orion crew and service modules stacked together and undergoing testing, and engineers outfitting the Artemis III and IV crew modules, engineers soon will connect the newly arrived European Service Module to the crew module adapter, which houses electronic equipment for communications, power, and control, and includes an umbilical connector that bridges the electrical, data, and fluid systems between the crew and service modules.
      The SLS rocket’s cone-shaped launch vehicle stage adapter connects the core stage to the upper stage and protects the rocket’s flight computers, avionics, and electrical devices in the upper stage system during launch and ascent. The adapter will be taken to Kennedy’s Vehicle Assembly Building in preparation for Artemis II rocket stacking operations.
      The boat-tail, which will be used during the assembly of the SLS core stage for Artemis III, is a fairing-like structure that protects the bottom end of the core stage and RS-25 engines. This hardware, picked up at NASA’s Michoud Assembly Facility in New Orleans, will join the Artemis III core stage engine section housed in the spaceport’s Space Systems Processing Facility.
      The Artemis IV SLS core stage engine section arrived from NASA Michoud and also will transfer to the center’s processing facility ahead of final assembly.
      Under the Artemis campaign, NASA will land the first woman, first person of color, and its first international partner astronaut on the lunar surface, establishing long-term exploration for scientific discovery and preparing for human missions to Mars. The agency’s SLS rocket and Orion spacecraft, and supporting ground systems, along with the human landing system, next-generation spacesuits and rovers, and Gateway, serve as NASA’s foundation for deep space exploration.
      For more information on NASA’s Artemis missions, visit:
      https://www.nasa.gov/artemis
      -end-
      Rachel Kraft
      Headquarters, Washington
      202-358-1600
      Rachel.h.kraft@nasa.gov
      Allison Tankersley, Antonia Jaramillo Botero
      Kennedy Space Center, Florida
      321-867-2468
      Allison.p.tankersley@nasa.gov/ antonia.jaramillobotero@nasa.gov
      View the full article
    • By European Space Agency
      The two new Galileo satellites launched in April have entered service, completing the second of three constellation planes. With every addition to the constellation, the precision, availability and robustness of the Galileo signal is improved. The next launch is planned in the coming weeks and the remaining six Galileo First Generation satellites will join the constellation in the next years.
      View the full article
    • By NASA
      4 Min Read Eclipses Create Atmospheric Gravity Waves, NASA Student Teams Confirm
      In this photo taken from the International Space Station, the Moon passes in front of the Sun casting its shadow, or umbra, and darkening a portion of the Earth's surface above Texas during the annular solar eclipse Oct. 14, 2023. Credits: NASA Student teams from three U.S. universities became the first to measure what scientists have long predicted: eclipses can generate ripples in Earth’s atmosphere called atmospheric gravity waves. The waves’ telltale signature emerged in data captured during the North American annular solar eclipse on Oct. 14, 2023, as part of the Nationwide Eclipse Ballooning Project (NEBP) sponsored by NASA.
      Through NEBP, high school and university student teams were stationed along the eclipse path through multiple U.S. states, where they released weather balloons carrying instrument packages designed to conduct engineering studies or atmospheric science. A cluster of science teams located in New Mexico collected the data definitively linking the eclipse to the formation of atmospheric gravity waves, a finding that could lead to improved weather forecasting.
      “Climate models are complicated, and they make some assumptions about what atmospheric factors to take into account.”
      Angela Des Jardins
      Director of the Montana Space Grant Consortium, which led NEBP.
      “Understanding how the atmosphere reacts in the special case of eclipses helps us better understand the atmosphere, which in turn helps us make more accurate weather predictions and, ultimately, better understand climate change.”
      Catching Waves in New Mexico
      Previous ballooning teams also had hunted atmospheric gravity waves during earlier eclipses, research that was supported by NASA and the National Science Foundation. In 2019, an NEBP team stationed in Chile collected promising data, but hourly balloon releases didn’t provide quite enough detail. Attempts to repeat the experiment in 2020 were foiled by COVID-19 travel restrictions in Argentina and a heavy rainstorm that impeded data collection in Chile.
      Project leaders factored in these lessons learned when planning for 2023, scheduling balloon releases every 15 minutes and carefully weighing locations with the best potential for success.
      “New Mexico looked especially promising,” said Jie Gong, a researcher in the NASA Climate and Radiation Lab at the agency’s Goddard Space Flight Center in Greenbelt, Maryland, and co-investigator of the research on atmospheric gravity waves. “The majority of atmospheric gravity sources are convection, weather systems, and mountains. We wanted to eliminate all those possible sources.”
      The project created a New Mexico “supersite” in the town of Moriarty where four atmospheric science teams were clustered: two from Plymouth State University in Plymouth, New Hampshire, and one each from the State University of New York (SUNY) Albany and SUNY Oswego.
      Students began launching balloons at 10 a.m. the day before the eclipse.
      “They worked in shifts through the day and night, and then everyone was on site for the eclipse,” said Eric Kelsey, research associate professor at Plymouth State and the NEBP northeast regional lead.
      “Our hard work really paid off. The students had a real sense of accomplishment.”
      Eric Kelsey
      Research Associate Professor at Plymouth State and the NEBP Northeast Regional Lead.
      Each balloon released by the science teams carried a radiosonde, an instrument package that measured temperature, location, humidity, wind direction, and wind speed during every second of its climb through the atmosphere. Radiosondes transmitted this stream of raw data to the team on the ground. Students uploaded the data to a shared server, where Gong and two graduate students spent months processing and analyzing it.
      Confirmation that the eclipse had generated atmospheric gravity waves in the skies above New Mexico came in spring 2024.
      “We put all the data together according to time, and when we plotted that time series, I could already see the stripes in the signal,” Gong said. “I bombarded everybody’s email. We were quite excited.”
      Plymouth State University students Sarah Brigandi, left, and Sammantha Boulay release a weather balloon from Moriarty, New Mexico, to collect atmospheric data on Oct. 14, 2023.NASA For Students, Learning Curves Bring Opportunity
      The program offered many students their first experience in collecting data. But the benefits go beyond technical and scientific skill.
      “The students learned a ton through practicing launching weather balloons,” Kelsey said. “It was a huge learning curve. They had to work together to figure out all the logistics and troubleshoot. It’s good practice of teamwork skills.”
      “All of this is technically complicated,” Des Jardins said. “While the focus now is on the science result, the most important part is that it was students who made this happen.”
      NASA’s Science Mission Directorate Science Activation program funds NEBP, along with contributions from the National Space Grant College and Fellowship Project and support from NASA’s Balloon Program Office.
      Learn More:
      Montana State-led ballooning project confirms hypothesis about eclipse effects on atmosphere
      Nationwide Eclipse Ballooning Project
      NASA Selects Student Teams for High-Flying Balloon Science
      NASA Science Activation
      NASA Space Grant
      Explore More
      2 min read Leveraging Teacher Leaders to Share the Joy of NASA Heliophysics
      Many teachers are exceptionally skilled at bridging students’ interests with real-world science. Now for the…
      Article 22 hours ago 9 min read Proyecto de la NASA en Puerto Rico capacita a estudiantes en biología marina
      Article 2 days ago 2 min read NASA Earth Science Education Collaborative Member Co-Authors Award-Winning Paper in Insects
      On August 13, 2024, the publishers of the journal Insects notified authors of three papers…
      Article 2 days ago View the full article
  • Check out these Videos

×
×
  • Create New...